Table of Contents
Advertisement
Using the Pole Mounting Bracket
Step 5
Release the retention handles.
Using the Pole Mounting Bracket
You can choose one of the following pole mounting brackets in the following table, according to the size of
the pole that you are going to mount your access point on.
Table 8: Pole Mounting Brackets
Mounting Bracket
Pole Mounting Bracket
Pole Mounting Bracket 2
Using the Mounting Bracket AIR-ACCPMK3700=
To mount the access point on a pole using the mounting bracket AIR-ACCPMK3700=:
Step 1
Use the supplied U bolts, washers, and nuts to attach the mounting bracket to the pole.
1
2"– 3.2" (5–8 cm) diameter pole
2
M8 x 1.25 U-bolt
Step 2
Use the included bolts, washers, and nuts to attach the access point to the mounting plate.
Note
Ensure that you symmetrically tighten the nuts on the U-bolts. If you over tighten one side, the U-bolt will
skew.
Step 3
Torque the nuts to 6 to 7 foot-pounds.
Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide
24
Cisco Part Number
AIR-ACCPMK3700=
AIR-ACCPMK3700-2=
3
M8 x 1.25 nuts and washers
4
Pole mounting bracket
Installation Overview
Applicable Pole Diameter
2–3.2 inches
2–16 inches
- Quick Links:
- Antennas and Radios
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
