Table of Contents
Advertisement
Switch Installation
Installation Guidelines
Before installing the Cisco Catalyst IE9300 Rugged Series Switch, be sure to meet the following guidelines:
• Cabling is away from sources of electrical noise, such as radios, power lines, and fluorescent lighting
• Operating environment is within the ranges that are listed in Technical Specifications.
• Relative humidity around the switch does not exceed 95 percent (noncondensing).
• Altitude at the installation site is not higher than 13,800 feet (4206.240 m).
• For 10/100/1000 fixed ports, cable lengths from the switch to connected devices are not more than 328
• For more information about SFP/SFP+ modules and cables, see Transceiver Modules.
• Airflow around the switch and through the vents is unrestricted. To prevent overheating, the switch must
Note
Required Tools and Equipment
Obtain the necessary tools and equipment:
• Phillips screwdriver
Verifying the Package Contents
The shipping box contains the model of the switch you ordered and other components that you need for
installation. Some components are optional, depending on your order.
Note
Verifying the Switch Operation
Before installing the switch in a rack or on a wall, you should power the switch and verify that the switch
passes the power-on self-test (POST).
To wire the switch to the power source, see Power-Supply Module Installation.
fixtures. Make sure that the cabling is away from other devices that might damage the cables.
feet (100 meters).
meet the minimum clearance of 1.75 in. (4.4 cm) at the top, bottom, and sides.
If the switch is installed in a closed or multirack assembly, the temperature
around it might be greater than normal room temperature. Ensure that the
internal temperature does not exceed the maximum ambient temperature
specifications for the switch.
Verify that you have received these items. If any item is missing or damaged, contact your Cisco
representative or reseller for instructions.
Cisco Catalyst IE9300 Rugged Series Switch Hardware Installation Guide
Installation Guidelines
15
- Quick Links:
- Switch Models
- Front Panel
- Power Supplies
Hide quick links:
Advertisement
Table of Contents
