Table of Contents
Advertisement
Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router
Table 1
Table 1
LED
POWER
STATUS - bi-color
MAINTENANCE
RX CARRIER–B
ACTIVE
RX PKTS (Packets)
RX CARRIER–A
ACTIVE
RX PKTS (Packets)
PASS-THROUGH
ENABLED
78-13602-01
describes the LEDs on the uBR10-SRP-OC12SML DPT WAN line card.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card LEDs and Their Functions
Status
Green
Off
Yellow
Green
Off
Yellow
Green
Off
Green
Off
Blinking
Green
Off
Green
Off
Green
Off
Blinking
Green
Off
Amber
Off
Green
Off
Description
Indicates that power is being supplied to the
Cisco uBR10-SRP- OC12SML DPT WAN line card.
Power off.
Indicates that the CPU is in the bootup process, self test, or
downloading code.
Indicates that the CPU has successfully completed the boot,
self test, and code download process, and that the
Cisco uBR10-SRP- OC12SML DPT WAN line card is the
active card.
Normally off. Indicates that no maintenance action is required.
Indicates a required maintenance operation and that the
Cisco uBR10-SRP- OC12SML DPT WAN line card can be
hot-swapped.
Indicates that the DPT port WAN has detected valid SONET or
SDH framing on the received carrier.
No valid SONET or SDH framing.
Indicates that side B of the DPT port line is functioning.
Not active.
Indicates that the DPT port line has received a packet. This
LED flickers in normal operation, indicating traffic.
No traffic.
Indicates that the DPT port line has detected valid SONET or
SDH framing on the received carrier.
No valid SONET or SDH framing.
Indicates that side A of the DPT port line is functioning.
Not Active
Indicates that the DPT port line has received a packet. This
LED flickers in normal operation, indicating traffic.
No traffic
Indicates that the DPT port line is in a pass-through state.
Not active.
Indicates that the DPT port line is enabled for operation;
however, the interface port might be in the shutdown state.
Not active.
Cisco uBR10-SRP-OC12SML DPT WAN Line Card
Feature Overview
5
Advertisement
Table of Contents
