hit counter script

Cisco RSP8 Installation And Configuration Manual page 51

Cisco systems route switch installation and configuration guide
Table of Contents

Advertisement

The output of these commands will vary based on your device configuration and system site
Note
requirements.
Use the show redundancy command to verify that SSO is configured on the device.
Step 1
Router# show redundancy
Operating mode is sso
redundancy mode sso
hw-module slot 6 image disk0:rsp-pv-mz
hw-module slot 7 image disk0:rsp-pv-mz
Active High Availability version is 3.0
Standby High Availability version is 3.0
Active in slot 6
Standby in slot 7
The system total uptime since last reboot is 2 weeks, 23 hours 41 minutes.
The system has experienced 4 switchovers.
The system has been active (become master) for 21 hours 1 minute.
Reason for last switchover:User forced.
Run the show redundancy states command to verify that SSO is operating on the device.
Step 2
Router# show redundancy states
my state = 13 -ACTIVE
peer state = 8
Mode = Duplex
Unit ID = 7
Redundancy Mode = sso
Maintenance Mode = Disabled
Manual Swact = Enabled
Communications = Up
client count = 12
client_notification_TMR = 30000 milliseconds
RF debug mask = 0x0
Use the show redundancy client command to display the list of applications and protocols that have
Step 3
registered as SSO protocols or applications. Verify the list of supported line protocols.
Router# show redundancy client
clientID = 0
clientID = 25
clientID = 22
clientID = 24
clientID = 37
clientID = 23
clientID = 49
clientID = 20
clientID = 21
clientID = 34
clientID = 29
clientID = 35
clientID = 50
clientID = 65000
OL-4920-02
-STANDBY HOT
clientSeq = 0
clientSeq = 130
clientSeq = 140
clientSeq = 150
clientSeq = 151
clientSeq = 220
clientSeq = 225
clientSeq = 310
clientSeq = 320
clientSeq = 330
clientSeq = 340
clientSeq = 350
clientSeq = 530
clientSeq = 65000
Route Switch Processor (RSP8) Installation and Configuration Guide
Enabling High Availability Features
RF_INTERNAL_MSG
CHKPT RF
Network RF Client
CEF RRP RF Client
MDFS RRP RF Client
FRAME RELAY
HDLC
IPROUTING NSF RF cli
PPP RF
SNMP RF Client
ATM
History RF Client
SNMP HA RF Client
RF_LAST_CLIENT
51

Advertisement

Table of Contents
loading

Table of Contents

Save PDF