Table of Contents
Advertisement
Last, we delete the rsp-pv-mz.120-22.3.S1 image from the standby RSP4/4+ card, as shown in
Figure 11
Complete the following steps to configure software error protection for this sample scenario:
To verify the location and version of the RSP software images, use the following commands to view slot
Step 1
0 on the active and standby RSPs:
Router# show slot0:
-#- ED ----type---- --crc--- -seek-- nlen -length- -----date/time------ name
1
.. image
rsp-pv-mz.120-22.3.S1
Router# show bootflash:
-#- ED ----type---- --crc--- -seek-- nlen -length- -----date/time------ name
1
.. image
rsp-pv-mz.120-22.3.S1
Copy the Cisco IOS Release 12.0(23)S system image from a TFTP server to PC Card slot 0 on the active
Step 2
and standby RSPs:
Router# copy tftp slot0:rsp-pv-mz.120-23.S
Router# copy tftp slaveslotk0:rsp-pv-mz.120-23.S
Step 3
Delete the rsp-pv-mz.120-22.3.S1 image from the standby RSP:
Router# delete slaveslot0:rsp-pv-mz.120-22.3.S1
OL-4920-02
Software Error Protection—Backing Up with an Older Software Version, Part III
143B4C13
ACB820
143B4C13
ACB820
Route Switch Processor (RSP8) Installation and Configuration Guide
Configuring High System Availability
21 11188128 Jan 28 2000 01:02:37
21 11188128 Jan 28 2000 01:02:37
Figure
11:
37
Advertisement
Table of Contents
