Table of Contents
Advertisement
Cisco Catalyst 9130AX Series Access Points
1
About this Guide
This guide provides instructions on how to install your Cisco Catalyst 9130AX series access point and provides links to
resources that can help you configure it. This guide also provides mounting instructions and troubleshooting information.
Note that the C9130AX series access point is referred to as the access point or the AP in this document.
2
About the Cisco Catalyst 9130AX Series W ireless Access Point
The Cisco Catalyst 9130AX series wireless access point is a dual-band, dual-concurrent, enterprise 802.11ax (Wi-Fi 6)
AP. This AP series has two models, one with integrated antennas and the other with external antennas, which are
designed to use both 2.4 GHz and the 5 GHz bands. This AP series supports a greater overall High Density Experience
(HDX), which provides a more predictable performance for advanced applications such as 4K or 8K videos, high-density
and high-definition collaboration applications, all-wireless offices, and Internet-of-Things (IoT). The AP supports full
interoperability with leading 802.11ax and 802.11ac clients, along with a mixed deployment with other APs and
controllers. These APs provide integrated security, resiliency and operational flexibility as well as increased network
intelligence.
A full listing of the AP's features and specifications are provided in the Cisco Catalyst 9130AX Series Access Point Data
Sheet, at the following URL:
https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9100ax-access-points/nb-06-cat-9130-ser-ap
-ds-cte-en.html
Cisco Catalyst 9130AX Series W ireless Access Point Features
The C9130AX series AP is a wireless controller-based product, and supports:
Four radios, a dual-band 5 GHz (8x8) flexible radio with 2.4 GHz and 4x4 5 GHz, a single-band 5 GHz radio, and an
omni IoT radio that can be used with BLE, Zigbee, Thread and other multi-protocol 802.15.4 devices
Four dual-band and four single-band 5 GHz integrated antennas on the C9130AXI AP models (C9130AXI-x and
C9130AXI-EWC-x).
Note
The 'x ' in the model numbers represents the regulatory domain. For information on supported regulatory
domains, see
Integrated internal antennas that are omni directional in azimuth, for both 2.4 GHz and 5 GHz bands.
External antennas on the C9130AXE AP model (C9130AXE-x and C9130AXE-EWC-x).
Multiuser Multiple-Input Multiple-Output (MU-MIMO) technology for uplink and downlink.
Orthogonal Frequency Division Multiple Access (OFDMA)-based scheduling for both uplink and downlink.
Multigigabit Ethernet (mGig)
The following hardware external interfaces:
1x100/1000/2500/5000 Multigigabit Ethernet (RJ-45)
—
RS-232 Console Interface through RJ-45
—
Recovery push button (enables partial or full system configuration recovery)
—
USB 2.0 Port
—
the" AP M odel N umbers and Regulatory Domains" section on page
3
5.
Hide quick links:
Advertisement
Table of Contents
