Table of Contents
Advertisement
Quick Links
Introduction to Cisco Catalyst 9130 Access Point
with 9104 Stadium Antenna
This document describes the Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna
(C-ANT9104) and provides electrical specifications and mounting instructions. The antenna is an eight-port
polarization-diverse, ultralow sidelobe patch array that operates over the 2.4-GHz and supports dual 5-GHz
Wi-Fi bands. At 5-GHz, the antenna supports beamwidth switching as well as beam steering. The antenna
supports stadiums, large public venues. It ships with an articulating mount for flat surfaces and masts and is
adjustable in horizontal and vertical planes.
Note
• The C9130AXE-x part number is a certified indoor access point.
• The C9130AXE-STA-x bundle, consisting of the C9130AXE-x AP and C-ANT9104 antenna, is a
factory-assembled bundle and is protected from weather elements for use in indoor or outdoor
environments such as arenas and stadiums.
•
Technical Specifications, on page 2
•
Azimuth and Elevation Radiation Patterns, on page 3
•
Safety Precautions, on page 6
•
Installation Notes, on page 7
•
Contents of the Antenna and Bracket Kit, on page 8
•
Dimensions of the Antenna and Brackets, on page 9
•
Installing the Antenna, on page 12
•
•
Mounting on a Pole or Mast, on page 17
•
Grounding the Antenna, on page 18
•
Connecting an Ethernet Cable to the Access Point, on page 19
•
Painting the Antenna, on page 22
•
Installing the Solar Shield, on page 23
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna
1
Advertisement
Table of Contents
Related Manuals for Cisco Catalyst 9130
Summary of Contents for Cisco Catalyst 9130
-
Page 1: Table Of Contents
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna This document describes the Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna (C-ANT9104) and provides electrical specifications and mounting instructions. The antenna is an eight-port polarization-diverse, ultralow sidelobe patch array that operates over the 2.4-GHz and supports dual 5-GHz Wi-Fi bands. -
Page 2: Technical Specifications
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Technical Specifications Technical Specifications Parameters 2.4-GHz 5-GHz Wide 5-GHz Narrow 5-GHz Narrow 5-GHz Narrow Beamwidth Beamwidth Beamwidth Beamwidth Boresight 10° 20° Nominal 50 Ohms 50 Ohms 50 Ohms 50 Ohms... -
Page 3: Azimuth And Elevation Radiation Patterns
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Azimuth and Elevation Radiation Patterns Parameters 2.4-GHz 5-GHz Wide 5-GHz Narrow 5-GHz Narrow 5-GHz Narrow Beamwidth Beamwidth Beamwidth Beamwidth Boresight 10° 20° Water/Foreign IP65 Body Ingress Operational 100 mph... - Page 4 Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Azimuth and Elevation Radiation Patterns Figure 3: C9104 S1-S2 Narrow 0° Pattern (5-GHz Azimuth) Figure 4: C9104 S1-S2 Narrow 10° Pattern (5-GHz Azimuth) Figure 5: C9104 S1-S2 Narrow 0° Pattern (5-GHz Elevation)
- Page 5 Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Azimuth and Elevation Radiation Patterns Figure 7: C9104 S1-S2 Narrow 20° Pattern (5-GHz Azimuth) Figure 8: C9104 S1-S2 Wide Radiation Pattern (5-GHz Azimuth) Figure 9: C9104 IoT Antenna Radiation Pattern (2.4-GHz Azimuth) Figure 10: C9104 IoT Antenna Radiation Pattern (2.4-GHz Elevation)
-
Page 6: Safety Precautions
• If you are installing an antenna for the first time, for your safety and that of others, seek professional assistance. Your Cisco sales representative can explain which mounting method to use for the size and type of antenna you are about to install. -
Page 7: Installation Notes
They would remove it safely. • If an accident occurs with the power lines, call for qualified emergency help immediately. For a listing of all the warning statements and their translations, see Translated Safety Warnings for Cisco Aironet Access Points at: http://www.cisco.com/c/en/us/td/docs/wireless/access_point/warnings/reference/guide/ap_warn1.html... -
Page 8: Contents Of The Antenna And Bracket Kit
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Contents of the Antenna and Bracket Kit • Install the antenna away from microwave ovens and 2-GHz cordless phones. These products can cause signal interference because they operate in the same frequency range as the device. -
Page 9: Dimensions Of The Antenna And Brackets
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Dimensions of the Antenna and Brackets Item # Part Quantity Tightening Values Set screws (mast/pole mount only) 3.0 to 3.5 Nm Dimensions of the Antenna and Brackets The dimensions noted in the following illustrations are all in millimeters, unless noted otherwise. - Page 10 VESA 75 mount pattern Grounding Point Tether anchor View the assembly of the Cisco C-ANT9104 antenna with the Cisco Catalyst 9130AX AP. Note Removing back plate will void product warranty. Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna...
- Page 11 Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Dimensions of the Antenna and Brackets Figure 16: Assembly view of C-ANT9104 Antenna Cisco C-ANT9104 Antenna Back plate DART cable connecting the C9130AX Ethernet and Console jumper cables AP with the C-ANT9104 Antenna...
-
Page 12: Installing The Antenna
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Installing the Antenna Slotted holes for hose clamps Installing the Antenna You can install the antenna on a wall or ceiling (must be a flat surface) or on a pole with a minimum diameter of 2 inches (5.08 cm) and a maximum diameter of 5 inches (12.7 cm). - Page 13 Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Required Tools and Equipment Caution As with all the outdoor installations, you must install the antenna with cables exiting downward which helps prevent water from accumulating around the cable exit points.
-
Page 14: Mounting On A Wall Or Ceiling Using Articulating Bracket
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Mounting on a Wall or Ceiling Using Articulating Bracket • A slotted screwdriver or a wrench to tighten the screws on the hose clamps • A Hex key to tighten set screws... - Page 15 Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Mounting on a Wall or Ceiling Using Articulating Bracket Figure 19: Close-Up View of the Azimuth and Elevation-Adjustment Pivots Figure 20: Azimuth Adjustment Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna...
- Page 16 Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Mounting on a Wall or Ceiling Using Articulating Bracket Figure 21: Elevation Adjustment Procedure Step 1 Determine the mounting location for the antenna. Step 2 Attach one of the mount flanges to the wall or ceiling using four M8 screws through the holes in the bracket.
-
Page 17: Mounting On A Pole Or Mast
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Mounting on a Pole or Mast Step 8 Connect the Ethernet cable to the antenna using the termination kit. Step 9 Connect the antenna to the building ground using the grounding kit. -
Page 18: Grounding The Antenna
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Grounding the Antenna Procedure Step 1 Determine the mounting location for the antenna on the pole or mast. Step 2 Position and mount the mounting flange bracket onto the pole or mast using the hose clamps provided in the kit. -
Page 19: Connecting An Ethernet Cable To The Access Point
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Connecting an Ethernet Cable to the Access Point Connecting an Ethernet Cable to the Access Point Installing a CAT 5e Ethernet Cable and Gland Assembly to the Access Point... - Page 20 Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Installing a CAT 6/6A Ethernet Cable and Gland Assembly to the Antenna If the cable gland and rubber gasket is not installed correctly, it causes the cable grip to leak.
- Page 21 Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Installing a CAT 6/6A Ethernet Cable and Gland Assembly to the Antenna Danger This unit might have more than one power supply connection. All connections must be removed to de-energize the unit.
-
Page 22: Painting The Antenna
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Painting the Antenna Install the Seal nut on to the Clamp Ring and hand tighten enough to compress seal onto the cable jacket. Step 10 Use an adjustable wrench or a 28–mm wrench to tighten the body's threaded end into the enclosure. -
Page 23: Installing The Solar Shield
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Installing the Solar Shield Installing the Solar Shield Figure 25: Solar Shield Mounting arm M4 screws to install the solar shield on to the antenna. Solar Shield (C-ANT9104-CVR=) Grounding point when solar shield is used... - Page 24 Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Installing the Solar Shield Use the included Electrical Joint Compound on both ends of grounding standoff and tighten the standoff to 10.2 +/- 1.0 kgf-cm of torque. Step 2 Connect the antenna to building ground with the included ground screw and included Electrical Joint Compound.
- Page 25 Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Installing the Solar Shield Apply the Electrical Joint Compound on the included ground screw and tighten to 10.2 +/- 1.0 kgf-cm of torque. Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna...
- Page 26 Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna Installing the Solar Shield Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna...