Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZDT25001FA
Summary of Contents for Zanussi ZDT25001FA
- Page 1 User Manual GETTING STARTED? EASY. ZDT25001FA EN User Manual Dishwasher...
-
Page 2: Safety Information
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. CHILDREN AND VULNERABLE PEOPLE SAFETY This appliance can be used by children aged from 8 years and •... -
Page 3: Safety Instructions
Do not keep the appliance door open without supervision to • prevent to fall on it. Before maintenance, deactivate the appliance and disconnect • the mains plug from the mains socket. Do not use water spray and steam to clean the appliance. •... - Page 4 • The appliance can release hot steam if you open the door while a programme operates. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. SERVICE • Contact the Authorised Service Centre to repair the appliance.
-
Page 5: Easy Start
EASY START On/off button Indicators Programme buttons Delay button INDICATORS Indicator Description End indicator. Multitab indicator. Salt indicator. It is always off while the programme operates. PROGRAMMES Consumption values Degree of soil Programme Programme phases Type of load Duration Energy Water (min) (kWh) -
Page 6: Programme Selection Mode
Consumption values Degree of soil Programme Programme phases Type of load Duration Energy Water (min) (kWh) Heavy soil • Prewash 150 - 1.5 - 1.6 13 - 15 Crockery, cut- • Wash 70 °C lery, pots and • Rinses pans •... -
Page 7: Cancel Function
CANCEL FUNCTION Press and hold simultaneously until the appliance is in programme selection mode. With this function you can cancel the running programme or the delay start. USER MODE While the appliance is in programme selection mode: 1. Press and hold •... -
Page 8: The Water Hardness Table
2. Press to change the setting. Each time you press , the level increases. After level 10 you will start again from level by 1. 3. Press the on/off button to confirm the setting. THE WATER HARDNESS TABLE German degrees French degrees Water softener mmol/l... -
Page 9: Deactivating The Rinse Aid Dispenser
DEACTIVATING THE RINSE AID DISPENSER While the appliance is in user mode: 1. Press • The indicators goes off. • The indicator starts to flash. • The end indicator indicates the current setting: End indicator on = rinse aid dispenser activated. 2. -
Page 10: Daily Use
ADDING RINSE AID The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. Fill the rinse aid dispenser when the indicator (A) becomes clear. DAILY USE 1. Open the water tap. 3. - Page 11 The function comes into operation: • 5 minutes after the completion of the programme. • After 5 minutes if the programme has not started. Starting a programme 1. Keep the appliance door ajar. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode.
-
Page 12: Hints And Tips
With the use of this option the programme duration is prolonged to increase the cleaning and drying results with the use of multi-tablets. Opening the door while the appliance operates If you open the door while a programme is running, the appliance stops. When you close the door, the appliance continues from the point of interruption. -
Page 13: Unloading The Baskets
the tableware, we recommend that you use the • Make sure that cutlery and dishes do not bond tablets with long programmes. together. Mix spoons with other cutlery. • Do not use more than the correct quantity of • Make sure that glasses do not touch other detergent. -
Page 14: Troubleshooting
• Make sure that there are no residues of food or soil in or around the edge of the sump. • Put back in place the flat filter (C). Make sure that it is correctly positioned under the 2 guides. •... - Page 15 Problem and alarm code Possible cause and solution You cannot activate the appliance. • Make sure that the mains plug is connected to the mains socket. • Make sure that there is no damaged fuse in the fuse box. The programme does not start. •...
-
Page 16: The Washing And Drying Results Are Not Satisfactory
Problem and alarm code Possible cause and solution The appliance trips the circuit-beaker. • The amperage is insufficient to supply simultaneous- ly all the appliances in use. Check the socket am- perage and the capacity of the meter or turn off one of the appliances in use. -
Page 17: Technical Information
Problem Possible cause and solution Unusual foam during washing. • Use the detergent for dishwashers only. • There is a leak in the rinse aid dispenser. Contact an Author- ised Service Centre. Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water softener". -
Page 18: Rating Plate
RATING PLATE INFORMATION FOR TEST INSTITUTES For all the necessary information for test performance, send an email to: info.test@dishwasher-production.com Write down the product number (PNC) that is on Mod..the rating plate. Prod. No..Ser. - Page 20 WWW.ZANUSSI.COM/SHOP...