Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZDT21006FA
Summary of Contents for Zanussi ZDT21006FA
- Page 1 User Manual GETTING STARTED? EASY. ZDT21006FA EN User Manual Dishwasher...
-
Page 2: Safety Information
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. - Page 3 If the supply cord is damaged, it must be replaced by the • manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp ends • pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down.
- Page 4 plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. • Dishwasher detergents are dangerous. Follow the safety instructions on the detergent packaging.
-
Page 5: Control Panel
CONTROL PANEL On/off button Programme button Programme indicators Delay button Indicators INDICATORS End indicator. Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. -
Page 6: Programme Selection Mode
Consumption values Degree of soil Programme Programme phases Type of load Duration Energy Water (min) (kWh) Normal soil • Prewash 130 - 1.4 - 1.6 15 - 17 Crockery and • Wash 65 °C cutlery • Rinses • Fresh soil •... -
Page 7: Adjusting The Water Softener
1. Press and hold the programme button until the indicator flashes, and the indicators are on. Settings available in the user mode: • The level of the water softener according to the water hardness. • The activation or the deactivation of the acoustic signal for the end of programme. •... -
Page 8: Activating Airdry
• The indicator is on = the acoustic signal is activated. 4. Press the on/off button to confirm the setting. ACTIVATING AIRDRY AirDry improves the drying results with less energy consumption. By default, AirDry is activated with all programmes excluding (if applicable) but it is possible to deactivate it. -
Page 9: Daily Use
ADDING SALT Before the first use, put one litre of water in the salt container. CAUTION! Water and salt can come out of the salt container during filling. To prevent corrosion, start a programme immediately after filling the salt container. ADDING RINSE AID The rinse aid helps to dry the dishes without streaks and stains. -
Page 10: Adding Multi-Tablets
ADDING MULTI-TABLETS • Do not fill the salt container and the rinse aid dispenser. • Set the rinse aid dispenser to the lowest position. SETTING AND STARTING A PROGRAMME Starting a programme 1. Keep the appliance door ajar. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode. -
Page 11: Hints And Tips
HINTS AND TIPS GENERAL • Do not use more than the correct quantity of detergent. Refer to the instructions on the Follow the hints below to ensure optimal cleaning detergent packaging. and drying results in daily use and to help you protect the environment. -
Page 12: Care And Cleaning
UNLOADING THE BASKETS After the programme is completed, 1. Let the tableware cool down before you water can still remain on the inside remove it from the appliance. Hot items can be surfaces of the appliance. easily damaged. 2. First remove items from the lower basket, then from the upper basket. -
Page 13: Troubleshooting
Follow carefully the instructions on the packaging of the product. TROUBLESHOOTING If the appliance does not start or it stops during With some problems the end indicator flashes operation, before you contact an Authorised intermittently indicating a malfunction. Service Centre, check if you can solve the problem The majority of problems that can occur can by yourself with the help of the information in the be solved without the need to contact an... -
Page 14: The Washing And Drying Results Are Not Satisfactory
Problem and alarm code Possible cause and solution The program lasts too long. • If the delayed start option is set, cancel the delay setting or wait for the end of the countdown. Small leak from the appliance door. • The appliance is not levelled. - Page 15 Problem Possible cause and solution There are whitish streaks or blu- • The release quantity of rinse aid is too much. Adjust the rinse ish layers on glasses and dishes. aid level to a lower level. • The quantity of detergent is too much. There are stains and dry water •...
-
Page 16: Product Information Sheet
PRODUCT INFORMATION SHEET Trade Mark Zanussi Model ZDT21006FA 911539205 Rated capacity (standard place settings) Energy efficiency class Energy consumption in kWh per year, based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes. The actual energy consumption will de- pend on how the appliance is used. -
Page 17: Environmental Concerns
Water supply max 60 °C Cold water or hot water 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption. ENVIRONMENTAL CONCERNS with the symbol with the household waste. - Page 20 WWW.ZANUSSI.COM/SHOP...