Toro Z597-D Z Master Setup Instructions page 6

With a 62 or 72 rear discharge mower

Hide thumbs Also See for Z597-D Z Master:

Step

Checking the Machine for

Grease

Parts needed for this step:

Number 2 general purpose lithium base

1 tube

or molybdenum base grease. (Purchase

separately.)

Procedure

1. Remove the belt covers and bolts as shown

below.

Figure 12

2. Check the tensioning arm for grease.

3. Check the grease for the three spindle bearings.

If needed, add grease until it comes out of the

lower seals.

4. Install the belt covers.

Figure 13

5. Check the grease for the cooling fan belt idler

arm.

6. Check the grease for the drive belt idler arms.

Figure 14

7. Grease the pump belt idler arm in the front

of the engine.

Figure 15

Table of Contents