Table of Contents
Advertisement
Display
No.
Key Name
2
Press this key to rotate the entire
pattern.
Rotate key
You can rotate a pattern one degree, ten
degrees or ninety degrees at a time.
Press
original position.
3
Press this key to enter the embroidery
screen.
Embroidery key
4
Press this key to save patterns to the
machine's memory or USB flash drive.
Memory key
(page 75)
5
Press this key to check the position of
the pattern. (page 64)
Trial key
6
Press this key to move the needle start
position to align the needle with the
Starting point key
pattern position. (page 73)
Aligning the pattern and the needle position
Example: Aligning the lower left side of a pattern and the
needle position
a
Mark the embroidery start position on the fabric, as
shown.
b
Press
.
Press
and press
c
1
1 Start position
The needle position moves to the bottom left corner
of the pattern (the embroidery frame moves so that
the needle is positioned correctly).
Explanation
to return the pattern to its
.
Use
to align the needle and the mark on the
d
fabric, press
and begin embroidering the pattern.
Embroidering linked characters
Follow the procedure described below to embroider linked
characters in a single row when the entire pattern extends
beyond the embroidery frame.
Example: Connecting "ABC" with "DEF"
a
Select the character patterns for "ABC", and then press
and
.
b
Press
.
c
Press
, and then press
The needle is positioned in the lower-left corner of
the pattern. The embroidery frame moves so that the
needle is positioned correctly.
d
Press
.
e
Lower the embroidery foot and then press the "Start/
Stop" button to begin embroidering.
f
After the characters are embroidered, and the threads
are cut, remove the embroidery frame, and then press
for [Finished embroidering].
a
Editing All Patterns
4
.
1 End of the
embroidering
73
Hide quick links:
Advertisement
Table of Contents
