Table of Contents
Advertisement
Utility stitches
e
Unfold the edge of fabric, and position the fabric with
the wrong side facing up.
a
d
c
a
a
a
a f
e
b
a
<Seen from the side>
f
Attach blind stitch foot "R".
g
Select a stitch.
No.
2-01
Stitch
• For details, refer to "Stitch Chart" on page 35.
h
Remove the flat bed attachment to use the free arm.
i
Slide the item that you wish to sew onto the free arm,
make sure that the fabric feeds correctly, and then start
sewing.
a
j
Position the fabric with the edge of the folded hem
against the guide of the presser foot, and then lower
the presser foot lever.
40
1 Wrong side of fabric
2 Right side of fabric
3 Edge of fabric
4 Desired edge of hem
5 Basting point
6 Basting
<Thick fabric>
<Normal fabric>
2-02
1 Free arm
1 Wrong side of
fabric
2 Fold of hem
3 Guide
k
Adjust the stitch width until the needle slightly catches
the fold of the hem. (page 29)
When you change the needle drop point, raise the
needle, and then change the stitch width.
a
Memo
• Blind hem stitches cannot be sewn if the left needle
drop point does not catch the fold. If the needle catches
too much of the fold, the fabric cannot be unfolded and
the seam appearing on the right side of the fabric will be
very large, leaving an unattractive finish.
Sew with the fold of the hem against the presser foot
l
guide.
m
Press the "Start/Stop" button to stop sewing when you
are finished, and raise the presser foot and needle to
pull the fabric under the presser foot towards the back
of the machine.
Note
• Be sure to pull the fabric towards the back of the
machine after sewing. If you pull the fabric toward side
or forward, the presser foot may be damaged.
n
Remove the basting stitching and turn the fabric with
the right side facing out.
1
1 Needle drop point
1 Thick fabric
2 Normal fabric
1 Wrong side of
fabric
2 Right side of
2
fabric
Hide quick links:
Advertisement
Table of Contents
