Table of Contents
Advertisement
i
While lightly holding down the bobbin with your right
hand (1), continue guiding the thread through the slit
with your left hand (2). Then, cut the thread with the
cutter (3).
Memo
• Be sure to complete the bobbin threading correctly
according to these instructions. If the thread is simply
placed in the slit in the needle plate cover, the bobbin
thread will not be correctly threaded, resulting in poor
sewing performance or incorrect thread tension.
Reattach the bobbin cover.
j
Insert the tab of the bobbin cover into the notch of the
needle plate cover, and then lightly press down on the
right side.
Memo
• You can begin sewing without pulling up the bobbin
thread. If you wish to pull up the bobbin thread before
starting to sew, pull up the thread according to the
procedure in "Pulling up the bobbin thread" on page 20.
Press
to unlock all keys and buttons.
k
Upper Threading
CAUTION
• When threading the upper thread, carefully
follow the instructions. If the upper threading
is not correct, the thread may become tangled
or the needle may bend or break.
• Never use a thread weight of 20 or lower.
• Use the needle and the thread in the correct
combination. For details on the correct
combination of needles and threads, refer to
"Fabric/Thread/Needle Combinations" on
page 21.
Threading the upper thread
When threading the upper thread, carefully follow
the instructions.
a
Turn on the machine.
b
Raise the presser foot lever to raise the presser foot.
Note
• If the presser foot is not raised, the machine cannot be
threaded.
Upper Threading
1
17
Hide quick links:
Advertisement
Table of Contents
