Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZDT 312
Summary of Contents for Zanussi ZDT 312
- Page 1 User manual Dishwasher ZDT 312...
-
Page 2: Table Of Contents
Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. -
Page 3: Safety Information
Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, in- cluding its hints and warnings. To avoid unnecessary mistakes and accidents, it is im- portant to ensure that all people using the appliance are thoroughly familiar with its opera- tion and safety features. -
Page 4: Control Panel
Installation • Check your dishwasher for any transport damage. Never connect a damaged ma- chine. If your dishwasher is damaged con- tact your supplier. • All packaging must be removed before use. • Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person. - Page 5 In addition to the dishwashing programme se- lection, the following functions can also be set with the help of these buttons: • the setting of the water softener, • deactivation/activation of the audible sig- nals. • cancel a washing programme or a delay start in progress •...
-
Page 6: Audible Signals
Audible signals Audible signals have been introduced to help indicate which operations the dishwasher is performing: • setting the water softener, • end of the programme, • intervention of an alarm due to malfunction. IMPORTANT! Factory setting: audible signals activated. Deactivation/activation of the audible sig- nals 1. - Page 7 4. The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted. 5. Once the delay start has elapsed the pro- gramme will start automatically. Cancelling the delay start To cancel a delay start in progress you have to reset the dishwasher.
-
Page 8: Washing Programmes
Washing programmes Programme Intensive 70° Heavy soil Normal 65° Normal soil 60° A 30' Light soil Bio 50° Normal soil Rinse and Hold Any. Partial load (to be completed later in the day). 1) Ideal for washing a partially loaded dishwasher. This is perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. -
Page 9: Set The Water Softener
When using tablets that integrate rinse aid and detergent: there is no need to fill up with rinse aid – set the water softener – add special (dishwasher) salt When using tablets that integrate rinse aid, detergent, salt function and other additives: there is no need to fill up with special salt or rinse aid. -
Page 10: Setting The Water Softener
Water hardness Clarke °TH 46 - 52 65 - 75 36 - 45 51 - 64 28 - 35 40 - 50 23 - 27 33 - 39 18 - 22 26 - 32 13 - 17 19 - 25 5 - 12 7 - 18 <... -
Page 11: Filling With Dishwasher Salt
light with a sequence of intermittent audible signals and a pause of a few seconds. Examples: 5 flashes / 5 intermittent audible signals, pause, 5 flashes / 5 intermittent audible signals, pause, etc...= level 5 6 flashes / 6 intermittent audible signals, pause, 6 flashes / 6 intermittent audible signals, pause, etc...= level 6... -
Page 12: Filling With Rinse Aid
Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click. IMPORTANT! Top up the special salt when the light on the control panel illuminates. Filling with rinse aid Open the lid. CAUTION! Never fill the rinse aid dispenser with any other sub- stances (e.g. -
Page 13: Adjusting The Dosage Of Rinse Aid
Adjusting the dosage of rinse aid Increase the dose if there are drops of water or lime spots on the dishes after washing. Open the lid. Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. - Page 14 For washing in the dishwasher the following cutlery and dishes are not suitable: • Cutlery with wooden, horn, china or mother-of- pearls handles. • Plastic items that are not heat resistant. • Older cutlery with glued parts that are not tempera- ture resistant.
-
Page 15: Upper Basket
Load upper basket. Light For taller items, the cup items (plastic bowls etc.) racks can be folded up- must be loaded in the up- wards. per basket and arranged so they do not move. Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper bas- ket to the higher position. -
Page 16: Use Of Detergent
IMPORTANT! Never lift or lower the basket on one side only Use of detergent IMPORTANT! Only use detergents suitable for dishwashers. Open the lid. For programmes with pre- When using detergent wash add an additional tablets: place detergent detergent dose in com- tablets in compartment A. -
Page 17: Unloading The Dishwasher
Unloading the dishwasher • Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appli- ance. • Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. -
Page 18: Cleaning The Spray Arms
Put the flat filter A back in Replace the filters and the base of the washing lock by turning the handle compartment and ensure clockwise to the stop. that it fits perfectly under the two guidesD. Cleaning the spray arms NEVER try to remove the spray arms. -
Page 19: Environmental Concerns
3. Remove the water inlet and discharge ho- ses. 4. Pull the machine out together with the ho- ses. Environmental concerns Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic com- ponents are identified by markings, e.g. >PE<, >PS<, etc. - Page 20 Fault code and malfunction • 1 intermittent audible signal • continuous flashing of the light of the running programme • 1 flash of the "end of programme " indicator light The dishwasher does not fill with water. • 2 intermittent audible signals •...
-
Page 21: Consumption Values
The dishes are not clean The dishes are wet and dull There are streaks, milky spots or a bluish coating on glasses and dishes Water drops have dries onto glasses and dishes If after all these checks, the problem persists, contact your local Service Force Centre. -
Page 22: Technical Data
temperature of the water and also by the var- iations of the power supply and the amount of dishes. Programme Programme duration (in Intensive 70° 80-90 Normal 65° 95-105 60°A30' BIO 50° (Test pro- gramme for Test Insti- tutes) Rinse and Hold Technical data Dimensions Electrical connection... -
Page 23: Installation
Amount of detergent required Rinse aid setting Upper basket cup racks: position A Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or compe- tent person. Water connection WARNING! The dishwasher must not be connected to open water appliances or instantaneous water heat-... -
Page 24: Inlet Hose
Inlet hose Connect the inlet hose to a water tap with an external thread of 3/4”. The inlet hose can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. -
Page 25: Electrical Connection
Electrical connection CAUTION! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate. - Page 28 156991180-00-26112007...