Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZDT311
Summary of Contents for Zanussi ZDT311
- Page 1 User manual Dishwasher ZDT311...
-
Page 2: Table Of Contents
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Setting the water softener _ _ _ _ _ _ _ _ _ _ _ _ _ 6... -
Page 3: Control Panel
• Do not change the specifications or modify this prod- uct. Risk of injury and damage to the appliance. • Do not use the appliance: – if the mains cable or water hoses are damaged, – if the control panel, worktop or plinth area are dam- aged, that you can get access to the inner side of the appliance. - Page 4 1) The indicator light is off while a washing programme operates. Function buttons Use the function buttons for these operations: • To set the water softener. Refer to the chapter 'Setting the water softener'. • To deactivate/activate the audible signals. Refer to the section 'Audible signals'.
-
Page 5: Washing Programmes
Washing programmes Washing programmes Programme Degree of soil Heavy soil Normal or light soil Crockery and cutlery Normal soil Normal or light soil Delicate crockery and 1) During the Auto programme, the soil level of the dishes is given by how cloudy the water is. The programme duration and consumptions can change. -
Page 6: Use Of The Appliance
Use of the appliance Refer to the following instructions for each step of pro- cedure: 1. Make a check if the water softener level is correct for the water hardness in your area. If necessary set the water softener. 2. Fill the salt container with dishwasher salt. 3. -
Page 7: Use Of Dishwasher Salt
Set switch to position 1 or Electronic adjustment The water softener is set at the factory at level 5. 1. Switch on the appliance. 2. Make sure that the appliance is in setting mode. 3. Press and hold function buttons B and C until the indicator lights for function buttons A, B and C start to flash. -
Page 8: Use Of Rinse Aid
Use of rinse aid Caution! Only use branded rinse aid for dishwashers. Do these steps to fill the rinse aid dispenser: Loading cutlery and dishes Helpful hints and tips Caution! Only use the appliance for household utensils that are applicable for dishwashers. Do not use the appliance to clean objects that can absorb water (sponges, household cloths, etc.). - Page 9 Arrange service dishes and large lids around the edge of the lower basket. The rows of prongs in the lower basket can be flat to load pots, pans and bowls. Use the cutlery grid. If the dimensions of the cutlery prevent use of the cutlery grid, remove it.
-
Page 10: Use Of Detergent
Use of detergent Only use detergents (powder, liquid or tablet) that are applicable for dishwashers. Follow the data on the packaging: • Dosage recommended by the manufacturer. • Storage recommendations. Do not use more than the correct quantity of deter- gent to save an environment. -
Page 11: Multitab Function
Multitab function The multitab function is for combi detergent tablets. These tablets contain agents such as detergent, rinse aid and dishwasher salt. Some types of tablets can contain other agents. Do a check if these tablets are applicable for the local water hardness. -
Page 12: Care And Cleaning
2. Release function buttons B and C to cancel the wash- ing programme. At this time you can do these steps: 1. Switch off the appliance. 2. Set a new washing programme . Fill the detergent dispenser with detergent before you set a new washing programme. -
Page 13: What To Do If
To remove filters B and C, Remove the flat filter A turn the handle approxi- from the bottom of the ap- mately 1/4 anticlockwise. pliance. What to do if… The appliance does not start or stops during operation. Put the flat filter A in the Put the filter system in po- bottom of the appliance. - Page 14 Fault code and malfunction • continuous flash of the light of the run- ning programme • intermittent audible signal • 1 flash of the end indicator light The dishwasher does not fill with water • continuous flash of the light of the run- ning programme •...
-
Page 15: Technical Data
The dishes are not clean Limescales particles on the dishes • The salt container is empty. The dishes are wet and dull There are streaks, milky spots or a bluish coating on glasses and dishes Dry water drop signs on glasses and dishes Technical data Dimensions... -
Page 16: Installation
Warning! To discard the appliance, follow the procedure: • Pull the mains plug out of the socket. • Cut off the mains cable and mains plug and discard them. Installation Warning! Make sure that mains plug is disconnected from the mains socket during installation. -
Page 17: Electrical Connection
• Do not put the water inlet hose or the safety valve in water. • If the water inlet hose or the safety valve is damaged, immediately disconnect the mains plug from the mains socket. • Only let the Service Force Centre replace the water inlet hose with safety valve. - Page 20 www.zanussi.com...