hit counter script
Download
Share
Print this page
Cisco NCS 6008 Series Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. NCS 6008
  6. Manual

Cisco NCS 6008 Series Manual

Hide thumbs Also See for NCS 6008 Series:

Advertisement

Quick Links

Bring-up the Cisco NCS 6008 Router
After installing the hardware, boot the Cisco NCS 6008 Series Router . Connect to the XR VM console port
and power on the router. The routersystem completes the boot process using the pre-installed operating system
(OS) image. If no image is available within the router, the router can be booted using an external bootable
USB drive.
After booting is complete, create the root username and password, and then use it to log on to the XR VM
console and get the router prompt. From the XR VM console, access the System Admin VM console to
configure system administration settings.
For more information about completing the hardware installation, see
6000 Series Routers Hardware Installation
The topics covered in this chapter are:
•
•
•
•
•
•
•
•

Connect to the XR VM Console Port and Power the Router

Use the XR VM console port on the Route Processor (RP) to connect to a new router . If required, subsequent
connections can be established through the management port, after it is configured.
There are the three console ports on the RP. Console port 2 is for the XR VM.
Figure 1: XR VM console port of the RP
Cisco Network Convergence System
Guide.
Bring-up the Cisco NCS 6008 Router
1

Advertisement

loading

Related Manuals for Cisco NCS 6008 Series

Summary of Contents for Cisco NCS 6008 Series

  • Page 1: Table Of Contents

    Bring-up the Cisco NCS 6008 Router After installing the hardware, boot the Cisco NCS 6008 Series Router . Connect to the XR VM console port and power on the router. The routersystem completes the boot process using the pre-installed operating system (OS) image.

  • Page 2: Setup Root User Credentials And Login To Xr Vm Console

    Bring-up the Cisco NCS 6008 Router Setup Root User Credentials and Login to XR VM Console Step 1 Connect a terminal to the XR VM console port of the RP. Step 2 Start the terminal emulation program on your workstation.
  • Page 3 Bring-up the Cisco NCS 6008 Router Setup Root User Credentials and Login to XR VM Console DETAILED STEPS Step 1 Enter root-system username: username Example: Enter root-system username: root Enter the username of the root user. The character limit is 1023. In this example, the name of the root user is "root".

  • Page 4: Access The System Admin Vm Console

    Bring-up the Cisco NCS 6008 Router Access the System Admin VM Console username root group root-lr group cisco-support secret 5 $1$NBg7$fHs1inKPZVvzqxMv775UE/ What to do next • Configure routing functions from the XR VM. • Configure system administration settings from the System Admin prompt. The System Admin prompt is displayed on accessing the System Admin VM console.

  • Page 5: Configure The Xr Vm Management Port

    Bring-up the Cisco NCS 6008 Router Configure the XR VM Management Port Step 4 config Example: sysadmin-vm:0_RP0#config Enters System Admin Config mode. Step 5 (Optional) exit Example: sysadmin-vm:0_RP0#exit Return to the XR VM CLI from the System Admin VM CLI.
  • Page 6 Bring-up the Cisco NCS 6008 Router Configure the XR VM Management Port 6. exit 7. router static address-family ipv4 unicast 0.0.0.0/0 default-gateway 8. commit DETAILED STEPS Step 1 configure Step 2 interface MgmtEth rack/slot/CPU0/port Example: RP/0/RP0/CPU0:router(config)#interface mgmtEth 0/RP0/CPU0/0 Enters interface configuration mode for the management interface of the primary RP.

  • Page 7: Connecting To The Xr Vm Management Port

    Bring-up the Cisco NCS 6008 Router Connecting to the XR VM Management Port What to do next Connect to the management port to the ethernet network. See Connecting to the XR VM Management Port, on page Connecting to the XR VM Management Port The XR VM management port supports 10/100G optical small form-factor pluggable (SFP) units to provide high speed network connectivity.

  • Page 8: Provision Breakout Interfaces

    Bring-up the Cisco NCS 6008 Router Provision Breakout Interfaces Note Telnet supports a maximum of 100 (including both IPv4 and IPv6) sessions. For a SSH connection, the ncs6k-k9sec package must be installed on the router. For details about package installation, see Install Packages.

  • Page 9: Shut Down Unused Linecard Slices

    Bring-up the Cisco NCS 6008 Router Shut Down Unused Linecard Slices Verify that ten TenGigE interfaces are created for every HundredGigE interface of the slice on which the breakout is configured. RP/0/RP0/CPU0:router(config)#show ipv4 interface brief Interface IP-Address Status Protocol Vrf-Name Bundle-Ether1 199.1.1.1...

  • Page 10: Perform Clock Synchronization With Ntp Server

    Bring-up the Cisco NCS 6008 Router Perform Clock Synchronization with NTP Server Example: RP/0/RP0/CPU0:router(config)#hw-module location 0/1/CPU0 slice 3 shutdown Shuts down the specified slice. The interfaces belonging to the slice that is shut down are deleted from the system and are not visible in the output of the show interfaces brief command.
  • Page 11 Bring-up the Cisco NCS 6008 Router Perform Clock Synchronization with NTP Server Step 5 sh run ntp Example: RP/0/RP0/CPU0:router#sh run ntp server 202.153.144.25 Bring-up the Cisco NCS 6008 Router...
  • Page 12 Bring-up the Cisco NCS 6008 Router Perform Clock Synchronization with NTP Server Bring-up the Cisco NCS 6008 Router...

This manual is also suitable for:

Ncs 6000 series