hit counter script
Cisco Network Convergence System 6000 Series Unpacking, Moving, And Securing Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. Network Convergence System 6000 Series
  6. Unpacking, moving, and securing manual
Cisco Network Convergence System 6000 Series Unpacking, Moving, And Securing Manual

Cisco Network Convergence System 6000 Series Unpacking, Moving, And Securing Manual

6000 series network convergence system routers unpacking, moving, and securing guide
Hide thumbs Also See for Network Convergence System 6000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Unpacking, Moving, and Securing Manual
Cisco Network Convergence System
6000 Series Routers
Unpacking, Moving, and Securing Guide
September 2013
Cisco Systems, Inc.
www.cisco.com
Cisco has more than 200 offices worldwide.
Addresses, phone numbers, and fax numbers
are listed on the Cisco website at
www.cisco.com/go/offices.
Text Part Number: OL-29233-01

Advertisement

Table of Contents
loading

Related Manuals for Cisco Network Convergence System 6000 Series

Summary of Contents for Cisco Network Convergence System 6000 Series

  • Page 1 Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide September 2013 Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco website at www.cisco.com/go/offices. Text Part Number: OL-29233-01...
  • Page 2 OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.

  • Page 3: Table Of Contents

    Attaching the Dolly to the Chassis and Removing the Chassis Pallet Prerequisites Required Tools and Equipment Steps Important Notice C H A P T E R Guidelines Verifying the Move Path Moving the Unpacked Chassis Prerequisites Steps Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...
  • Page 4 Contents Prerequisites C H A P T E R Required Tools and Equipment Steps Unpacking Chassis Components Steps Component Return Information Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...

  • Page 5: Audience

    This document provides instructions for unpacking a Cisco NCS 6008 chassis and its components, attaching a dolly, moving the chassis, and securing the chassis to the floor. The Cisco NCS 6008 chassis is a product in the Cisco Network Convergence System 6000 Series family. The companion document to...
  • Page 6 SAVE THESE INSTRUCTIONS Warning Statements using this symbol are provided for additional information and to comply with regulatory and customer requirements. Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...

  • Page 7: Related Documentation

    Changes to This Document Revision Date Change Summary OL-29233-01 September 2013 Initial release of this document. This document introduces the Cisco NCS 6008 8-Slot Line Card Chassis. Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...

  • Page 8: Obtaining Additional Information And Support

    Cisco technical documentation: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed, and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service, and Cisco currently supports RSS version 2.0.

  • Page 9: Chapter 1 Chassis Packaging

    Fabric Cards (FCs). The Cisco NCS 6008 chassis has an integrated rack and does not require an external rack. It is bolted to the facility floor. It contains its own power and cooling systems. Power systems are available using AC or DC power.

  • Page 10: Chassis Specifications

    The chassis is shipped with the fan trays and Craft Panel already installed. A plastic panel covers the rear card cage. The drill hole template (Cisco product ID NC8-LCC-DRILLTEMP) is attached to the inside of the shipping crate door. •...

  • Page 11: Preventing Electrostatic Discharge

    System 6000 Series Routers Site Planning Guide. System Installation Templates Because of its size and weight, the chassis must be securely bolted to the floor. Cisco provides a drill hole template (Figure 1-1) that ships attached to the inside of the crate door. The template identifies the chassis footprint and the pattern of holes that must be drilled into the floor for the mounting hardware that secures the chassis to the floor.

  • Page 12: Dolly Specifications

    Drill Hole Template for the Cisco NCS 6008 Chassis Dolly Specifications The optional dolly that is available for the Cisco NCS 6008 chassis is flexible enough to meet several challenges common when first positioning a chassis of this size and weight. Such challenges include limited hallway or doorway width, doorway thresholds, ramps, and tight corners along the transport route.

  • Page 13: Unpacking The Dolly

    Both configurations are acceptable to transport the as-shipped chassis. Note The optional NCS 6008 lift dolly is available from Cisco with PID NCS-LIFT. If you already have a CRS lift dolly, you can order PID NCS-LIFT-BRKT, which is the CRS lift upgrade to the NCS 6008.
  • Page 14 With at least two people, one on each side of the dolly shipping crate, tilt the crate back and lift off the Step 5 pallet (Figure 1-3). Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...
  • Page 15 Figure 1-3 Removing Chassis Dolly Shipping Container Using the 3/8-inch ratchet wrench with 5/8-inch socket, remove the two bolts and the dolly stopper Step 6 (Figure 1-4). Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...
  • Page 16 Release the caster brakes and remove the dolly from the pallet. Step 7 Each dolly unit weighs approximately 126 lb (57 kg). We recommend that at least two people Caution remove the dolly from the pallet. Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...
  • Page 17 7 Label showing how to attach dolly to chassis the dolly configuration) 3 Lift bracket bolts 8 Move height calibration label 4 Lift brackets 9 Lifting cranks 5 Brakes Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...
  • Page 18 3 Swing component for dolly (used to change 8 Lift brackets the dolly configuration) 4 Move height calibration label 9 Label showing how to attach dolly to chassis 5 Lift bracket bolts Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide 1-10 OL-29233-01...

  • Page 19: Modifying The Dolly Configuration

    On the dolly unit attached to the front side of the chassis, use the 3/8-inch ratchet wrench with 12-mm Step 5 hex bit to remove the two holding bolts on the left side lift arm swing bracket to convert to the 180-degree configuration. Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide 1-11 OL-29233-01...
  • Page 20 Using the 3/8-inch ratchet wrench with 12-mm hex bit, firmly tighten the holding bolts on both dolly units. To change the configuration back to the 90-degree configuration, repeat these steps and swing Note the arm into the 90-degree position. Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide 1-12 OL-29233-01...

  • Page 21: Chapter 2 Required Tools And Equipment

    Required Tools and Equipment 3/8-inch ratchet wrench • • 10-mm hex bit • 11/16-inch socket (to remove the top wood and frame cushion system) • Ladder or step platform Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...

  • Page 22: Steps

    Remove the hinge mechanisms from the front door. Raise and twist the lock hinges at the base of the Step 2 plywood box (Figure 2-1). Figure 2-1 Cisco NCS 6008 Chassis in Original Packaging Lock latches Large side panel Three-sided plywood box Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...
  • Page 23 Disengage the remaining latches from the shipping box. There are two on each side of the shipping box. Step 4 Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...
  • Page 24 Once the four bolts are loosened, remove each bolt manually and place aside, then remove the top wood and frame cushion system from the chassis. Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...

  • Page 25: Attaching The Dolly To The Chassis And Removing The Chassis Pallet

    Attaching the Dolly to the Chassis and Removing the Chassis Pallet This section describes how to attach the dolly to the Cisco NCS 6008 chassis to remove the chassis shipping pallet and prepare to move the chassis into place. Only the 90-degree dolly configuration is used to remove the chassis from the pallet.

  • Page 26: Required Tools And Equipment

    Before performing this task, unpack both the chassis and the dolly. Required Tools and Equipment 3/8-inch ratchet wrench • • 17-mm socket • 3/4-inch socket • 12-mm hex bit Dolly (Cisco product ID NC-8-LIFT/B=) • Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...

  • Page 27: Steps

    Using the 3/8-inch ratchet wrench with 3/4-inch socket, remove the four bolts that connect the pallet to Step 1 each corner of the chassis base (Figure 2-6). Figure 2-6 Remove Four Bolts That Attach Pallet to Chassis Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...
  • Page 28 Select a lift bracket. There are two identical lift brackets for the right front and left rear and two identical lift brackets for the right rear and left front (Figure 2-8). Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...
  • Page 29 Figure 2-9 shows the oblique view of attaching the lift brackets to the chassis. Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...
  • Page 30 Using two people, crank the dolly up (Figure 2-12). Note To make aligning easier, as you slide the dolly, tilt it as needed. Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide 2-10 OL-29233-01...
  • Page 31 3/4 of an inch above the pallet (Figure 2-12). One person on each side of the dolly should raise the chassis enough to cleanly remove the base Note pallet. Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide 2-11 OL-29233-01...
  • Page 32 Attaching the Dolly to the Chassis and Removing the Chassis Pallet Figure 2-12 Adjusting the Height of the Dolly Slide the pallet from under the chassis (Figure 2-13). Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide 2-12 OL-29233-01...
  • Page 33 Using two people (one person working on each dolly unit), lower the chassis (Figure 2-14) to within 1 inch of the floor. See the height label on the dolly lift wheel assembly. Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide 2-13 OL-29233-01...
  • Page 34 To reduce the risk of dolly instability, chassis damage, or personal injury, do not raise the equipment Warning more than 1 inch (2.4 cm) above the floor during transportation. Statement 358 Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide 2-14 OL-29233-01...

  • Page 35: Chapter 3 Important Notice

    C H A P T E R Moving the Chassis This chapter describes the things to consider as you move the Cisco NCS 6008 chassis from the loading dock to the mounting location at the site. Important Notice, page 3-1 •...
  • Page 36 This dolly is designed only for the temporary transportation of the Cisco equipment listed here. Do not Warning use it with any other device or for any other purpose. Cisco equipment designed for use with the dolly: Cisco NCS 6008 Chassis. Statement 356 Do not permanently locate the equipment on the dolly.

  • Page 37: Verifying The Move Path

    Weight of chassis (as shipped, packaging removed) 775 lb (352 kg) Weight of dolly 126 lb (57.3 kg) Maximum recommended height from floor 1.5 in. (3.8 cm) (for chassis on dolly) Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...
  • Page 38 32 in. (81 cm)* 180-degree dolly position 44 in. (112 cm) 52 in. (132 cm) *Aisle width may be different when transporting the chassis around a corner. Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...

  • Page 39: Moving The Unpacked Chassis

    Moving the Unpacked Chassis Figure 3-2 is a top view of the minimum aisle space required to install the Cisco NCS 6008 chassis without using the dolly supplied by Cisco. This space is exclusive of both the PDU brackets (mounted on both sides), and the router cosmetics.
  • Page 40 Carefully roll the chassis into position near its mounting location. Step 4 Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...

  • Page 41: Prerequisites

    Securing the Chassis This chapter describes how to secure the Cisco NCS 6008 chassis to a concrete floor. The chassis is shipped with a drill hole template to assist you in putting the bolts in the proper position on the floor.

  • Page 42: Steps

    If an alternate floor mounting pattern is required, remove the lower side panels (left and right sides of Step 3 the chassis) to expose additional floor mounting holes (Figure 4-1). Figure 4-1 Remove Lower Side Panels to Expose Additional Floor Mounting Holes Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...

  • Page 43: Unpacking Chassis Components

    Unpack all secondary pallet parts from the packaging, and set the parts aside for installation. Do not unpack individual cards until you are ready to install the cards in the chassis. Note Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide OL-29233-01...

  • Page 44: Component Return Information

    -viii. To facilitate your conversation with Cisco technical support, locate and note the serial number for the chassis. The serial number label for the Cisco NCS 6008 chassis is located on the rear side of the chassis, lower left corner.

This manual is also suitable for:

Ncs 6008

Table of Contents