hit counter script
Download
Share
Print this page
Cisco NCS 5700 Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. NCS 5700
  6. Manual

Cisco NCS 5700 Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Install the Chassis
Before you begin this task, ensure that you have read and understood the safety warnings in the Standard
Warning Statements section of the Safety Warnings handout topic.
Installing the Cisco NCS 5700 router involves these tasks:
Note
The images in this chapter are only for representation purposes, unless specified otherwise. The chassis' actual
appearance and size may vary.
•
•
•
•
•
•
Rack Types
Figure 1: Rack specification EIA (19 inches and 23 inches)
Rack Types, on page 1
Rack Mount the Chassis, on page 2
Ground the Chassis, on page 35
Connect AC Power to the Chassis, on page 37
Connect DC Power to the Chassis , on page 40
Power Supply Unit Input and Output Ranges, on page 43
Install the Chassis
1

Advertisement

loading

Related Manuals for Cisco NCS 5700

Summary of Contents for Cisco NCS 5700

  • Page 1 Before you begin this task, ensure that you have read and understood the safety warnings in the Standard Warning Statements section of the Safety Warnings handout topic. Installing the Cisco NCS 5700 router involves these tasks: Note The images in this chapter are only for representation purposes, unless specified otherwise. The chassis' actual appearance and size may vary.

  • Page 2: Rack Mount The Chassis

    Install the Chassis Rack Mount the Chassis Table 1: Rack specification EIA (19 inches and 23 inches) Post Type Rack Type Rack Front Opening Rack Mounting Hole Mounting Flange Centre-Centre (Y) Dimension (Z) 4 Post 19 inches (48.3 450.8mm (17.75”) 465mm (18.312”) 482.6mm (19”) centimeters)
  • Page 3 Install the Chassis Rack Mount the NCS-57B1 Chassis in a 2-Post Rack Rack Mount the NCS-57B1 Chassis in a 2-Post Rack This section describes how to use the rack-mount kit provided with the chassis, to install the following chassis into a cabinet or a 2-post rack: •...
  • Page 4 Install the Chassis Rack Mount the NCS-57B1 Chassis in a 2-Post Rack Figure 2: Rack-Mount Brackets Rack-mount brackets Cable guide M4 x 6 Phillips counter sink screws Step 2 Install the router onto the 2-post rack as follows: a) With two people, lift the router into position between the two rack posts. b) Move the router until the rack-mount brackets come in contact with two rack posts.
  • Page 5 Install the Chassis Rack Mount the NCS-57C1 Chassis in a 2-Post Rack with Sliders Figure 3: 2-Post Rack Mount Rack Mount the NCS-57C1 Chassis in a 2-Post Rack with Sliders This section describes how to use the rack-mount kit provided with the NCS-57C1 chassis, to install the chassis into a cabinet or a 2-post rack.
  • Page 6 Install the Chassis Rack Mount the NCS-57C1 Chassis in a 2-Post Rack with Sliders Quantity Part Description (only 23-inch rack-mount kit) Extension brackets Ground lug Step 1 (Only 23-inch rack post) Mount the extension brackets on the 23-inch rack post. Use three 12-24 Phillips pan-head screws with 30 in-lb (3.39 N.m) to attach each extension bracket to the rear and front rack post on either sides.
  • Page 7 Install the Chassis Rack Mount the NCS-57C1 Chassis in a 2-Post Rack with Sliders Figure 5: Rack-Mount Slider Assembly on a 19-inch 2-Post Rack Slider assembly Slider rail Screws In case of a 23-inch 2-post rack, mount the slider assembly on the extension brackets following the same Note procedure outlined in Step 2.
  • Page 8 Install the Chassis Rack Mount the NCS-57C1 Chassis in a 2-Post Rack with Sliders Figure 6: Rack-Mount Slider Assembly on a 23-inch 2-Post Rack Slider assembly Slider rail Screws Extension bracket Step 3 Install slider brackets to the router as follows: a) Determine which end of the chassis is to be located in the cold aisle as follows: •...
  • Page 9 Install the Chassis Rack Mount the NCS-57C1 Chassis in a 2-Post Rack with Sliders Figure 7: Mount Slider Brackets Slider brackets Screws Step 4 Install the router onto the 2-post rack as follows: a) Holding the router with both hands, position the back of the router between the front posts of the rack. b) Move the router until the slider brackets come in contact with slider rails installed in the rack.
  • Page 10 Install the Chassis Rack Mount the NCS-57C1 Chassis in a 2-Post Rack with Sliders Figure 8: 19-inch 2-Post Rack Mount Chassis Figure 9: 23-inch 2-Post Rack Mount Chassis Install the Chassis...
  • Page 11 Install the Chassis Rack Mount the NCS-57C3-MOD Chassis in a 2-Post Rack Rack Mount the NCS-57C3-MOD Chassis in a 2-Post Rack This section describes how to use the rack-mount kit provided with the chassis, to install the following chassis into a cabinet or a 2-post rack: •...
  • Page 12 Install the Chassis Rack Mount the NCS-57C3-MOD Chassis in a 2-Post Rack Figure 10: Rack-Mount Brackets Rack-mount brackets M4 x 6 Phillips counter sink screws Step 2 Install the router onto the 2-post rack as follows: a) With two people, lift the router into position between the two rack posts. b) Move the router until the rack-mount brackets come in contact with two rack posts.
  • Page 13 Install the Chassis Rack-Mount the NCS-57B1 Chassis in a 4-Post Rack Figure 11: 2-Post Rack Mount Rack-Mount the NCS-57B1 Chassis in a 4-Post Rack This section describes how to use the rack-mount kit that is provided with the router to install the router in a 4-post rack.
  • Page 14 The holes that you use depend on which side your chassis need to be put in the cold aisle. Figure 12: Rack-Mount Brackets on Cisco Port-Side Intake Install the Chassis...
  • Page 15 Install the Chassis Rack-Mount the NCS-57B1 Chassis in a 4-Post Rack Rack-mount bracket Rack-mount guides M4 x 6mm Phillips Rack-mount slider rails flat-head screws c) Repeat Step 1b with the other rack-mount bracket on the other side of the router. Step 2 Install the two rack-mount guides on the chassis as follows: a) Position a rack-mount guides on the side of the chassis with its two holes aligned to the two screw holes on the side...
  • Page 16 Install the Chassis Rack Mount the NCS-57C1 Chassis in a 4-Post Rack with Sliders Figure 13: 4-Post Rack Mount Rack Mount the NCS-57C1 Chassis in a 4-Post Rack with Sliders This section describes how to use the rack-mount kit provided with the NCS-57C1 chassis, to install the chassis into a cabinet or a 4-post rack.
  • Page 17 Install the Chassis Rack Mount the NCS-57C1 Chassis in a 4-Post Rack with Sliders Quantity Part Description (only 23-inch rack-mount kit) Extension brackets Ground lug Step 1 (Only 23-inch rack post) Mount the extension brackets on the 23-inch rack post. Use three 12-24 Phillips pan-head screws with 30 in-lb (3.39 N.m) to attach each extension bracket to the rear and front rack post on either sides.
  • Page 18 Install the Chassis Rack Mount the NCS-57C1 Chassis in a 4-Post Rack with Sliders Figure 15: Rack-Mount Slider Assembly on a 19-inch 4-Post Rack Slider assembly Slider rail Screws Note In case of a 23-inch 2-post rack, mount the slider assembly on the extension brackets following the same procedure outlined in Step 2.
  • Page 19 Install the Chassis Rack Mount the NCS-57C1 Chassis in a 4-Post Rack with Sliders Figure 16: Rack-Mount Slider Assembly on a 23-inch 4-Post Rack Slider assembly Slider rail Screws Extension bracket Step 3 Install slider brackets to the router as follows: a) Determine which end of the chassis is to be located in the cold aisle as follows: •...
  • Page 20 Install the Chassis Rack Mount the NCS-57C1 Chassis in a 4-Post Rack with Sliders Figure 17: Mount Slider Brackets Slider bracket Screws Step 4 Install the router onto the 4-post rack as follows: a) Holding the router with both hands, position the back of the router between the front posts of the rack. b) Move the router until the slider brackets come in contact with slider rails installed in the rack.
  • Page 21 Install the Chassis Rack Mount the NCS-57C1 Chassis in a 4-Post Rack with Sliders Figure 18: 4-Post Rack Mount the NCS-57C1 Chassis Figure 19: 23-inch 4-Post Rack Mount Chassis Install the Chassis...
  • Page 22 Rack Mount the NCS-57C3-MOD Chassis in a 4-Post Rack using Sliders This section describes how to install the Cisco NCS 57C3-MOD chassis on the 4-post rack, using sliders. The sliders are used to install the chassis on a 4-post rack. Sliders are used to access the fan trays in the chassis easily during maintenance.
  • Page 23 Middle Slider Member Unlock Feature on the Inner Slider Member Middle Slider Member The following table lists the items that are contained in the Cisco NCS 57C3-MOD Router rack-mount kit. Table 7: Router Rack-Mount Kit Quantity Part Description Rack-mount brackets...
  • Page 24 Install the Chassis Rack Mount the NCS-57C3-MOD Chassis in a 4-Post Rack using Sliders Quantity Part Description Grounding lug (Only NC55-2RU-ACC-SL1) M4 x 10-mm Phillips pan-head screws (Only NC55-2RU-ACC-SL2) M4 x 8-mm Phillips flat-head screws (Only NC55-2RU-ACC-SL2) washers (Only NC55-2RU-ACC-SL2) 10-32 counter sink screws (Only NC55-2RU-ACC-SL2) 9.1 mm rack mount pins (Only NC55-2RU-ACC-SL2) 8.8 mm rack mount pins Tray and screws (NC57C3-ACC-SL-TR), used with NC55-2RU-ACC-SL2 for the NCS-57C3-MOD...
  • Page 25 Install the Chassis Rack Mount the NCS-57C3-MOD Chassis in a 4-Post Rack using Sliders a. Align the inner slider member with one side of the chassis and use three M4 x 10-mm pan head screws and tighten the screws to 12 in-lbs (1.4 N-m). b.
  • Page 26 Install the Chassis Rack Mount the NCS-57C3-MOD Chassis in a 4-Post Rack using Sliders Figure 23: Install the Inner Slider Member to the Tray Inner slider member M4 x 8-mm Phillips flat head screws. Step 4 Install the outer slider member to the rack: a.
  • Page 27 Install the Chassis Rack Mount the NCS-57C3-MOD Chassis in a 4-Post Rack using Sliders Figure 24: Rear and Front End (NC55-2RU-ACC-SL1) of the Outer Slider Member Rear End- Outer slider Screw thread adapter at the member Front End- Outer slider member Outer slider member (NC55-2RU-ACC-SL2) Adjust the slider (push and pull) to place and fix the slider behind the front post.
  • Page 28 Install the Chassis Rack Mount the NCS-57C3-MOD Chassis in a 4-Post Rack using Sliders Figure 25: Rear and Front End (NC55-2RU-ACC-SL2) of the Outer Slider Member Screw thread adapter at the Counter sink screws Front End- Outer slider member Washer Rear end - Outer slider member Front end - Outer slider...
  • Page 29 Install the Chassis Rack Mount the NCS-57C3-MOD Chassis in a 4-Post Rack using Sliders Figure 26: Install the Outer Slider Member to the Rack Outer slider member Step 5 Extend the middle slider member from the slider assembly. Install the Chassis...
  • Page 30 Install the Chassis Rack Mount the NCS-57C3-MOD Chassis in a 4-Post Rack using Sliders Figure 27: Extend the Middle Slider Member Middle slider member Step 6 Insert the inner slider members (attached to the chassis or tray) to the middle slider member on the rack. Step 7 Slide the chassis or tray into middle slider member until it cannot be pushed further.
  • Page 31 Install the Chassis Rack Mount the NCS-57C3-MOD Chassis in a 4-Post Rack using Sliders Figure 28: Install the Chassis in the Rack Figure 29: Install the Tray to the Rack Outer slider member Middle slider member Inner slider member Step 8 For NC55-2RU-ACC-SL2 with the tray, do the following: a.
  • Page 32 Install the Chassis Rack Mount the NCS-57C3-MOD Chassis in a 4-Post Rack using Sliders b. Use six M4 x 8-mm pan head screws (three on each side) and tighten the screws to 12 in-lbs (1.4 N-m). Figure 30: Install the Chassis to the Tray Step 9 Pull the blue release tab on the inner slider member on both sides simultaneously to release the lock position.
  • Page 33 Install the Chassis Rack Mount the NCS-57C3-MOD Chassis in a 4-Post Rack using Sliders Figure 31: Secure the Chassis to the Rack Figure 32: Secure the Tray to the Rack Install the Chassis...
  • Page 34 Install the Chassis (Optional) Install the Cable Management Bracket What to do next Ground the chassis. (Optional) Install the Cable Management Bracket This section describes how to install the cable management bracket on the NCS-57C1 chassis. Before you begin The chassis must be installed and secured to the rack. Step 1 Remove the middle screws from either sides of the chassis.

  • Page 35: Ground The Chassis

    Install the Chassis Ground the Chassis Ground the Chassis Warning Statement 1024 This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.
  • Page 36 Install the Chassis Ground the Chassis Figure 33: NCS-57B1-6D24-SYS and NCS-57B1-5DSE-SYS Ground Lug Figure 34: NCS-57C1 Ground Lug (Chassis Rear Side) Install the Chassis...

  • Page 37: Connect Ac Power To The Chassis

    Install the Chassis Connect AC Power to the Chassis Figure 35: NCS-57C3-MOD Ground Lug Grounding lug Pan-head screws c) Attach one end of the shelf ground cable (#6 AWG cable) to the grounding cover plate using the specified dual-hole lug connector. Step 5 Tighten the pan-head screws to torque value of 11.5 in-lbs (1.3 N-m).
  • Page 38 Install the Chassis Connect AC Power to the Chassis Note NCS-57B1-6D24-SYS and NCS-57B1-5DSE-SYS—Supports 2000W PSU. For AC input source, router supports output power of 2000 W at high line voltage range 200Vac to 240Vac. To support low line applications, a voltage range between 100 Vac to 127 Vac is supported with maximum output power of 1000 W. To provide full output power of 2000 W, the nominal voltage rating value ranges between 200Vac to 240Vac, depending on the standards in various countries.
  • Page 39 Install the Chassis Connect AC Power to the Chassis Figure 36: Cable Clamp: Examples Install the Chassis...

  • Page 40: Connect Dc Power To The Chassis

    Install the Chassis Connect DC Power to the Chassis Connect DC Power to the Chassis Warning Statement 1003 Before performing any of the following procedures, ensure that power is removed from the DC circuit. Warning Statement 1022 A readily accessible two-poled disconnect device must be incorporated in the fixed wiring. Warning Statement 1045 This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation.
  • Page 41 Install the Chassis Connect DC Power to the Chassis Figure 37: DC Input Power Cable Lug Note To avoid hazardous conditions, all components in the area where DC input power is accessible must be properly insulated. Therefore, before installing the DC cable lugs, be sure to insulate the lugs according to the manufacturer's instructions.
  • Page 42 Install the Chassis Connect DC Power to the Chassis Figure 39: NCS-57C1 - Connecting DC Power Figure 40: NCS-57C3-MOD - Connecting DC Power Step 3 Dress the power according to local practice. Step 4 Connect the office battery and return cables according to the fuse panel engineering specifications. Step 5 Insert the DC connector into the DC receptacle on the power supply.
  • Page 43 Install the Chassis Power Supply Unit Input and Output Ranges To connect the NCS-950W-DCFW power supply module with the power source, use a copper wire that is Note 14AWG or lesser in size. Step 6 Ensure that the locking mechanism has engaged to secure the cable. Step 7 Turn on the circuit breaker at the power source.
  • Page 44 Install the Chassis Power Supply Unit Input and Output Ranges Install the Chassis...