Security-Policy - Cisco NCS 1004 Command Reference Manual
Hide thumbs
Also See for NCS 1004:
- Hardware installation manual (70 pages) ,
- Manual (52 pages) ,
- Quick start manual (6 pages)
Table of Contents
Advertisement
security-policy
security-policy
To specify the security for OTNSec policy, use the security-policy command in OTNSec policy configuration
mode.
security-policy must-secure
Syntax Description
must-secure
None
Command Default
OTNSec policy configuration
Command Modes
Command History
Release
Release
7.0.1
Example
The following is a sample in which an OTNSec policy is configured.
RP/0/RP0/CPU0:ios#configure
Mon Mar 11 15:16:58.417 UTC
RP/0/RP0/CPU0:ios(config)#otnsec policy otnsec-policy1
RP/0/RP0/CPU0:ios(config-otnsec-policy)#cipher-suite AES-GCM-256
RP/0/RP0/CPU0:ios(config-otnsec-policy)#security-policy must-secure
RP/0/RP0/CPU0:ios(config-otnsec-policy)#sak-rekey-interval 120
RP/0/RP0/CPU0:ios(config-otnsec-policy)#commit
The following is a sample of an OTNSec policy.
RP/0/RP0/CPU0:ios#show run otnsec policy otnsec-policy1
Tue Mar 12 11:14:03.591 UTC
otnsec policy otnsec-policy1
cipher-suite AES-GCM-256
security-policy must-secure
sak-rekey-interval 120
!
Command Reference for Cisco NCS 1004
66
Mandatory security for OTNSec.
Modification
This command is
introduced.
Commands
- Quick Links:
- Controller Optics
Hide quick links:
Advertisement
Table of Contents
