Advertisement
4) Attach an optional power supply unit to the multi-purpose section.
Attach an optional power supply unit to the positioning portion of the
multi-purpose section and secure it with the three screws included in
this product.
Screw
5) Connect the optional power supply harness to the PCU PWB of the
printer.
<1>Remove the screw that secures the harness cover of the printer and
slide the harness cover upward to remove it.
Work the harness cover as shown in the illustration.
Cut-out
<2>Connect the connector of the optional power supply harness to
CN11 of the PCU PWB of the printer.
CN11
<3>Reattach the harness cover to its original position and secure it with
the removed screw.
At this time, check that wiring of the optional power supply harness
has been handled as shown in the illustration.
Optional power
supply harness
Harness cover
Screws
Optional power supply unit
Screw
Harness cover
Connector
Screw
Harness cover
AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-8
6) Attach the multi rear cabinet.
<1>Pass the AC cord of the optional power supply unit as shown in the
illustration and secure the multi rear cabinet with the two screws.
Screw
<2>Attach the AC inlet cover to the multi rear cabinet and secure it with
the removed screw.
Screw
AC inlet cover
7) Connect the AC cord of the optional power supply unit to the printer.
Connect the AC cord of the optional power supply unit to the position
of the inlet connector of the printer shown in the illustration.
AC cord
8) Turn the power switch of the printer to "ON".
Insert the power plug of the printer to the outlet.
Then, turn the main switch located on the front of the printer to "ON".
Screw
Multi rear cabinet
AC cord
"ON"
Advertisement
