Siemens SINUMERIK 802D sl Function Manual page 213
Turning, milling, nibbling
Hide thumbs
Also See for SINUMERIK 802D sl:
- Programming and operating manual (364 pages) ,
- Instruction manual (262 pages) ,
- Programming manual (251 pages)
Table of Contents
Advertisement
Example
The following example shows compensation value inputs for machine axis X1 as a program.
%_N_AX_EEC_INI
CHANDATA(1)
$AA_ENC_COMP[0,0,X1]=0.0
$AA_ENC_COMP[0,1,X1]=0.01
$AA_ENC_COMP[0,2,X1]=0.012
...
$AA_ENC_COMP[0,120,X1]=0.0
$AA_ENC_COMP_STEP[0,X1]=2.0
$AA_ENC_COMP_MIN[0,X1]=-200.0
$AA_ENC_COMP_MAX[0,X1]=40.0
$AA_ENC_COMP_IS_MODULO[0,X1]=0
Values for more than 350 interpolation points result in alarm 12400 "Element does not exist".
Figure 11-3
Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0
Compensation table parameters (system variables for LEC)
11.3 Interpolatory compensation
; 1. compensation value (interpolation point 0)
+0 mm
; 2. compensation value (interpolation point 1)
+10 mm
; 3. compensation value (interpolation point 2)
+12 mm
; last compensation value (interpolation point
120)
; distance between interpolation points 2.0 mm
; compensation starts at -200.0 mm
; compensation ends at +40.0 mm
; compensation without modulo function M17
Compensation (K3)
213
- Quick Links:
- Signals from Plc to Nck
Hide quick links:
Advertisement
Table of Contents
