Voice Menu Codes; Access The Ivr And Configure Your Ata Settings - Cisco ATA 191 Administration Manual
Analog telephone adapter
Hide thumbs
Also See for ATA 191:
- Administration manual (142 pages) ,
- User manual (40 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
Voice Menu Codes
•
Access the IVR and Configure Your ATA Settings
Before You Begin
If you set the IP mode to static IP, you must go on-hook to make it effective. Then, you can configure the IP
address, subnet mask, and default gateway.
The network cable must be connected to set a static IP.
You can change the IVR password on the Device window of Cisco Unified Communications Manager.
Note
Procedure
Step 1
To access the IVR, go off-hook on the phone connected to PHONE1 or PHONE2.
Step 2
Press **** from the phone keypad.
The IVR prompts for a password.
The ATA 191 allows you to enter only numerical values for the password. The default password is 24726.
Step 3
Enter the IVR password by pressing the number keypad, followed by #.
You are at the IVR main configuration menu.
Step 4
Follow the voice prompts on the IVR. See
navigating the IVR.
Step 5
To return to the main configuration menu, press *.
Step 6
To exit the IVR, end the call.
Access the IVR and Configure Your ATA Settings, page 61
Cisco ATA 191 Analog Telephone Adapter Administration Guide for Cisco Unified Communications Manager
C H A P T E R
IVR Configuration Menu Options, on page 62
8
for information on
61
- Quick Links:
- Installation and Configuration Overview
Hide quick links:
Advertisement
Table of Contents
