Cisco CRS Configuration Manual page 43
Ios xr virtual private network
Hide thumbs
Also See for CRS:
- Configuration manual (430 pages) ,
- User manual (304 pages) ,
- Command reference manual (155 pages)
Table of Contents
Advertisement
Implementing Point to Point Layer 2 services
SUMMARY STEPS
1. configure
2. l2vpn
3. nsr
4. logging nsr
5. Use the commit or end command.
DETAILED STEPS
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Enters Global Configuration mode.
Step 2
l2vpn
Example:
RP/0/RP0/CPU0:router(config)# l2vpn
Enters the Global Configuration mode.
Step 3
nsr
Example:
RP/0/RP0/CPU0:router (config-l2vpn)# nsr
Enables L2VPN nonstop routing.
Step 4
logging nsr
Example:
RP/0/RP0/CPU0:router (config-l2vpn)# logging nsr
Enables logging of NSR events.
Step 5
Use the commit or end command.
commit - Saves the configuration changes and remains within the configuration session.
end - Prompts user to take one of these actions:
• Yes - Saves configuration changes and exits the configuration session.
• No - Exits the configuration session without committing the configuration changes.
• Cancel - Remains in the configuration mode, without committing the configuration changes.
Cisco IOS XR Virtual Private Network Configuration Guide for the Cisco CRS Router, Release 6.1.x
Configuring L2VPN Nonstop Routing
29
Advertisement
Table of Contents
