Configuring The Mac Address-Related Parameters; Configuring The Mac Address Source-Based Learning - Cisco CRS Configuration Manual
Ios xr virtual private network
Hide thumbs
Also See for CRS:
- Configuration manual (430 pages) ,
- User manual (304 pages) ,
- Command reference manual (155 pages)
Table of Contents
Advertisement
Implementing Multipoint Layer 2 Services
Configures virtual forwarding interface (VFI) parameters and enters L2VPN bridge group bridge domain VFI configuration
mode.
Step 6
shutdown
Example:
RP/0/RP0/CPU0:router(config-l2vpn-bg-bd-vfi)# shutdown
Disables the virtual forwarding interface (VFI).
Step 7
Use the commit or end command.
commit - Saves the configuration changes and remains within the configuration session.
end - Prompts user to take one of these actions:
• Yes - Saves configuration changes and exits the configuration session.
• No - Exits the configuration session without committing the configuration changes.
• Cancel - Remains in the configuration mode, without committing the configuration changes.
Step 8
show l2vpn bridge-domain [ detail ]
Example:
RP/0/RP0/CPU0:router# show l2vpn bridge-domain detail
Displays the state of the VFI. For example, if you shut down the VFI, the VFI is shown as shut down under the bridge
domain.
Configuring the MAC Address-related Parameters
These topics describe how to configure the MAC address-related parameters:
The MAC table attributes are set for the bridge domains.
Configuring the MAC Address Source-based Learning
Perform this task to configure the MAC address source-based learning.
Cisco IOS XR Virtual Private Network Configuration Guide for the Cisco CRS Router, Release 6.1.x
Configuring the MAC Address-related Parameters
93
Advertisement
Table of Contents
