Configuring Ospf As The Routing Protocol Between The Pe And Ce Routers - Cisco CRS Configuration Manual
Ios xr virtual private network
Hide thumbs
Also See for CRS:
- Configuration manual (430 pages) ,
- User manual (304 pages) ,
- Command reference manual (155 pages)
Table of Contents
Advertisement
Connecting MPLS VPN Customers
Example:
RP/0/RP0/CPU0:router(config-static-vrf-afi)# 172.168.40.24/24 vrf vrf_1 bfd fast-detect
Enables bidirectional forwarding detection (BFD) to detect failures in the path between adjacent forwarding engines.
This option is available is when the forwarding router address is specified in Step 5 .
Step 7
Use the commit or end command.
commit - Saves the configuration changes and remains within the configuration session.
end - Prompts user to take one of these actions:
• Yes - Saves configuration changes and exits the configuration session.
• No - Exits the configuration session without committing the configuration changes.
• Cancel - Remains in the configuration mode, without committing the configuration changes.
Configuring OSPF as the Routing Protocol Between the PE and CE Routers
Perform this task to configure provider edge (PE)-to-customer edge (CE) routing sessions that use Open
Shortest Path First (OSPF).
Cisco IOS XR Virtual Private Network Configuration Guide for the Cisco CRS Router, Release 6.1.x
212
Implementing MPLS Layer 3 VPNs
Advertisement
Table of Contents
