Configuring Vpn Id - Cisco ASR 9000 Series Configuration Manuallines
L2vpn and ethernet services configuration guide
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Implementing Multipoint Layer 2 Services
• No - Exits the configuration session without committing the configuration changes.
• Cancel - Remains in the configuration mode, without committing the configuration changes.
Configuring VPN ID
Perform this task to configure a VPN ID.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12. Use the commit or end command.
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters the Global Configuration mode.
Step 2
l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
Enters L2VPN configuration mode.
Step 3
bridge group bridge-group-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group metroA
Enters Layer 2 VPN VPLS bridge group configuration mode.
Step 4
bridge-domain bridge-domain-name
configure
l2vpn
bridge group bridge-group-name
bridge-domain bridge-domain-name
vfi { vfi-name }
vpn-id vpn-id
autodiscovery bgp
rd { as-number:nn | ip-address:nn | auto }
route-target export { as-number:nn | ip-address:nn }
signaling-protocol bgp
ve-id { number }
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
Configuring VPN ID
317
Advertisement
Table of Contents
