Cisco Catalyst 3560-X Command Reference Manual page 801
Hide thumbs
Also See for Catalyst 3560-X:
- Software configuration manual (1538 pages) ,
- Command reference manual (1244 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Usage Guidelines
Examples
OL-21522-02
Downloaded from
www.Manualslib.com
In the show vlan mtu command output, the MTU_Mismatch column shows whether all the ports in the
VLAN have the same MTU. When yes appears in this column, it means that the VLAN has ports with
different MTUs, and packets that are switched from a port with a larger MTU to a port with a smaller
MTU might be dropped. If the VLAN does not have an SVI, the hyphen (-) symbol appears in the
SVI_MTU column. If the MTU-Mismatch column displays yes, the names of the port with the MinMTU
and the port with the MaxMTU appear.
If you try to associate a private VLAN secondary VLAN with a primary VLAN before you define the
secondary VLAN, the secondary VLAN is not included in the show vlan private-vlan command output.
In the show vlan private-vlan type command output, a type displayed as normal means a VLAN that
has a private VLAN association but is not part of the private VLAN. For example, if you define and
associate two VLANs as primary and secondary VLANs and then delete the secondary VLAN
configuration without removing the association from the primary VLAN, the VLAN that was the
secondary VLAN is shown as normal in the display. In the show vlan private-vlan output, the primary
and secondary VLAN pair is shown as non-operational.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
This is an example of output from the show vlan command.
Switch> show vlan
VLAN Name
---- -------------------------------- --------- -------------------------------
1
default
1
default
<output truncated>
2
VLAN0002
3
VLAN0003
<output truncated>
1000 VLAN1000
1002 fddi-default
1003 token-ring-default
1004 fddinet-default
1005 trnet-default
VLAN Type
SAID
MTU
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1
enet
100001
1500
2
enet
100002
1500
3
enet
100003
1500
<output truncated>
1005 trnet 101005
1500
manuals search engine
Table 2-51
Status
Ports
active
Gi1/0/1, Gi1/0/2, Gi1/0/3
Gi1/0/4, Gi1/0/5, Gi1/0/6
Gi1/0/7, Gi1/0/8, Gi1/0/9
Gi1/0/10, Gi1/0/11, Gi1/0/12
Gi1/0/13, Gi1/0/14, Gi1/0/15
Gi1/0/16, Gi1/0/17, Gi1/0/18
Gi1/0/19, Gi1/0/20, Gi1/0/21
Gi1/0/24, Gi2/0/1, Gi2/0/2
active
Gi2/0/1, Gi2/0/2, Gi2/0/3, Gi2/0/4
Gi2/0/5, Gi2/0/6, Gi2/0/7, Gi2/0/8
Gi2/0/9, Gi2/0/10, Gi2/0/11, Gi2/0/12
Gi2/0/13, Gi2/0/14, Gi2/0/15, Gi2/0/16
active
active
active
active
active
active
active
Parent RingNo BridgeNo Stp
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ibm
Catalyst 3750-X and 3560-X Switch Command Reference
show vlan
describes the fields in the display.
BrdgMode Trans1 Trans2
-
1002
1003
-
0
0
-
0
0
-
0
0
2-769
Advertisement
Table of Contents
