Preface; Audience; Purpose - Cisco CVA122 Hardware Installation Manual

Cable voice adapter

Hide thumbs Also See for CVA122:

Table of Contents

Preface

This document is the Cisco CVA122/CVA122E Cable Voice Adapter Hardware Installation Guide and

describes installing, powering on, and troubleshooting a Cisco CVA122/CVA122E Cable Voice Adapter.

The document also includes cabling and pinout information.

This section contains:

•

This guide is intended for coaxial networking transmission installers and technicians who are familiar

with the installation, maintenance, and troubleshooting of cable television wiring and equipment. Cable

system installers and technicians should be familiar with their cable plant's base operating parameters

and subscriber service offerings. Cable system support engineers and administrators should be

acquainted with Ethernet, IEEE 802.3, and Universal Serial Bus (USB) type data communications

networks.

Note

This document contains instructions to install or configure the Cisco CVA122/CVA122E Cable Voice

Adapter using procedures that only qualified personnel should perform. This document is not

intended for subscribers. See the "Related Documentation" section of this preface for the

documentation available for subscribers.

This guide covers the physical installation of the Cisco CVA122/CVA122E Cable Voice Adapter. These

procedures include site preparation, the physical placement of the cable voice adapter in an appropriate

location, the cabling required for the power, Ethernet, USB, voice, and cable connections, and

verification of the installation at the cable voice adapter's initial power-on.

OL-0799-02 (04/2001)

Audience

Purpose

Organization

Cva122e