Cisco ASR 900 Series Configuration Manual page 135
Time division multiplexing configuration; cisco ios xe fuji 16.7.x
Hide thumbs
Also See for ASR 900 Series:
- Release notes (310 pages) ,
- Manual (174 pages) ,
- Configuration manual (172 pages)
Table of Contents
Advertisement
PPP and Multilink PPP Configuration
SUMMARY STEPS
1. enable
2. configure terminal
3. interface virtual template number
4. ppp multilink endpoint {hostname | ip ipaddress | mac LAN-interface | none | phone telephone-number
| string char-string}
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
interface virtual template number
Example:
Router(config)# interface virtual template 1
Step 4
ppp multilink endpoint {hostname | ip ipaddress | mac
LAN-interface | none | phone telephone-number | string
char-string}
Example:
Router(config-if)# ppp multilink endpoint ip
192.0.2.0
Time Division Multiplexing Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Creates a virtual template interface that can be configured
and applied dynamically in creating virtual access interfaces
and enters interface configuration mode.
Overrides or changes the default endpoint discriminator the
system uses when negotiating the use of MLP with the peer.
Configuring Multilink PPP
127
Advertisement
Chapters
Table of Contents
