Configuring Port Range Forwarding - Cisco RV215W Administration Manual
Wireless-n vpn firewall
Hide thumbs
Also See for RV215W:
- Administration manual (149 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Configuring the Firewall
Configuring Port Forwarding
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 1—Cisco Confidential
In the External Port field, enter the port number that triggers this rule when a
connection request from outgoing traffic is made.
In the Internal Port field, enter the port number used by the remote system to
respond to the request it receives.
From the Protocol drop-down menu, choose a protocol (TCP, UDP, or TCP & UDP).
In the IP Address field, enter the IP address of the host on the LAN side to which
the specific IP traffic will be forwarded. For example, you can forward http traffic
to port 80 of the IP address of a web server on the LAN side.
In the Enable field, check the Enable box to enable the rule.
Click Save.
Configuring Port Range Forwarding
To add a port range forwarding rule:
Choose Firewall > Port Range Forwarding.
In the Application field, enter the name of the application for which to configure
port forwarding.
In the External Port field, specify the port number that will trigger this rule when a
connection request from outgoing traffic is made.
In the Start field, specify the port number that begins the range of ports to
forward.
In the End field, specify the port number that ends the range of ports to forward.
From the Protocol drop-down menu, choose a protocol (TCP, UDP, or TCP & UDP).
In the IP Address field, enter the IP address of the host on the LAN side to which
the specific IP traffic will be forwarded.
In the Enable field, check the Enable box to enable the rule.
Click Save.
4
84
Advertisement
Table of Contents
