Table of Contents
Advertisement
Implementing SNMP
The default User Datagram Protocol (UDP) port is 161. If you do not a specify a UDP port with the
Note
udp-port keyword and port argument, then the configured SNMP trap notifications are sent to port 161.
!
snmp-server host 10.50.32.170 version 2c userv2c udp-port 2345
snmp-server host 10.50.32.170 version 3 auth userV3auth udp-port 2345
snmp-server host 10.50.32.170 version 3 priv userV3priv udp-port 2345
snmp-server host 10.50.32.170 version 3 noauth userV3noauth udp-port 2345
snmp-server user userv2c groupv2c v2c
snmp-server user userV3auth groupV3auth v3 auth md5 encrypted 140F0A13
snmp-server user userV3priv groupV3priv v3 auth md5 encrypted 021E1C43 priv des56 encrypted
1110001C
snmp-server user userV3noauth groupV3noauth v3 LROwner
snmp-server view view_name 1.3 included
snmp-server community public RW
snmp-server group groupv2c v2c read view_name
snmp-server group groupV3auth v3 auth read view_name
snmp-server group groupV3priv v3 priv read view_name
snmp-server group groupV3noauth v3 noauth read view_name
!
This example shows how to verify the configuration SNMP trap notification recipients host, the recipients of
SNMP trap notifications. The output displays the following information:
• IP address of the configured notification host
• UDP port where SNMP notification messages are sent
• Type of trap configured
• Security level of the configured user
• Security model configured
config
show snmp host
Notification host: 10.50.32.170 udp-port: 2345 type: trap
user: userV3auth security model: v3 auth
Notification host: 10.50.32.170 udp-port: 2345 type: trap
user: userV3noauth security model: v3 noauth
Notification host: 10.50.32.170 udp-port: 2345 type: trap
user: userV3priv security model: v3 priv
Notification host: 10.50.32.170 udp-port: 2345 type: trap
user: userv2c security model: v2c
Setting an IP Precedence Value for SNMP Traffic: Example
The following example shows how to set the SNMP IP Precedence value to 7:
configure
snmp-server ipv4 precedence 7
exit
Uncommitted changes found, commit them before exiting(yes/no/cancel)? [cancel]: y
System Management Configuration Guide for the Cisco NCS 6000 Series Router, Release 5.0.x
Setting an IP Precedence Value for SNMP Traffic: Example
83
Advertisement
Table of Contents
