Table of Contents
Advertisement
Implementing NTP
• The router is configured to allow its software clock to be synchronized with the clock of the peer (or
vice versa) at IP address 10.3.32.154 using authentication key 2.
• The router is configured to allow its software clock to be synchronized with the clock by the device at
IP address 10.32.154.145 using authentication key 3.
• The router is configured to synchronize only to systems providing authentication key 3 in their NTP
packets.
ntp
authenticate
authentication-key 2 md5 encrypted 06120A2D40031D1008124
authentication-key 3 md5 encrypted 1311121E074110232621
trusted-key 3
server 10.3.32.154 key 3
peer 10.32.154.145 key 2
Disabling NTP on an Interface: Example
The following example shows an NTP configuration in which 0/2/0/0 interface is disabled:
ntp
interface tengige 0/2/0/0
disable
exit
authentication-key 2 md5 encrypted 06120A2D40031D1008124
authentication-key 3 md5 encrypted 1311121E074110232621
authenticate
trusted-key 3
server 10.3.32.154 key 3
peer 10.32.154.145 key 2
Configuring the Source IP Address for NTP Packets: Example
The following example shows an NTP configuration in which Ethernet management interface 0/0/CPU0/0 is
configured as the source address for NTP packets:
ntp
authentication-key 2 md5 encrypted 06120A2D40031D1008124
authentication-key 3 md5 encrypted 1311121E074110232621
authenticate
trusted-key 3
server 10.3.32.154 key 3
peer 10.32.154.145 key 2
source MgmtEth0/0/CPU0/0
Configuring the System as an Authoritative NTP Server: Example
The following example shows a NTP configuration in which the router is configured to use its own NTP
master clock to synchronize with peers when an external NTP source becomes unavailable:
ntp
master 6
System Management Configuration Guide for the Cisco NCS 6000 Series Router, Release 5.0.x
Configuration Examples for Implementing NTP
45
Advertisement
Table of Contents
