Table of Contents
Advertisement
Additional References
To learn the processes that are placeable, enter the show placement program all command in EXEC mode.
RP/0/RP0/CPU0:router# show placement program all
Mon Aug 18 17:13:15.155 PST DST
If a program is shown as having 'rejected locations' (i.e., locations on which
it cannot be placed), the locations in question can been seen using the "show
placement policy program" command.
If a program has been placed but not yet started, the amount of time elapsed
since the program was placed is shown in the 'waiting to start' field.
Parentheses around the node indicate that the node has not yet fully booted.
Program
--------------------------------------------------------------------------------
li_mgr
rsi_master
statsd_manager
ipv4_rib
ipv6_rib
policy_repository
ipv4_mpa
ipv6_mpa
bfd
domain_services
ftp_fs
rcp_fs
tftp_fs
ipv4_connected
ipv4_local
ipv4_rump
ipv6_connected
ipv6_local
ipv6_rump
atmgcmgr
eem_metric_dir
l2tp_mgr
l2vpn_mgr
rt_check_mgr
ipv4_static
isis instance lab
ospf instance 100
isis_uv
ospf_uv
mpls_vpn_mib
rsvp
mpls_ldp
lspv_server
ospf instance 0
ospfv3 instance 0
ospfv3_uv
Additional References
The following sections provide references related to Cisco IOS XR Process Placement.
System Management Configuration Guide for the Cisco NCS 6000 Series Router, Release 5.0.x
20
This will be true of standby nodes.
Placed at location
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
0/RP0/CPU0 (0/RP1/CPU0)
Process Placement
# rejected
Waiting
locations
to start
Advertisement
Table of Contents
