Cisco ONS 15600 Reference Manual page 135
Hide thumbs
Also See for ONS 15600:
- Reference manual (376 pages) ,
- Installation instructions manual (14 pages) ,
- Manual (10 pages)
Table of Contents
Advertisement
Chapter 8
SONET Topologies and Upgrades
Figure 8-2
Node 3
The SONET K1, K2, and K3 bytes carry the information that governs BLSR protection switches. Each
BLSR node monitors the K bytes to determine when to switch the SONET signal to an alternate physical
path. The K bytes communicate failure conditions and actions taken between nodes in the ring.
If a break occurs on one fiber, working traffic targeted for a node beyond the break switches to the
protect bandwidth on the second fiber. The traffic travels in a reverse direction on the protect bandwidth
until it reaches its destination node. At that point, traffic is switched back to the working bandwidth.
Figure 8-3
Four-Node, Two-Fiber BLSR
Node 0
OC-48 Ring
Node 2
shows a traffic pattern sample on a four-node, two-fiber BLSR.
STSs 1-24 (working)
STSs 25-48 (protect)
STSs 1-24 (working)
STSs 25-48 (protect)
Node 1
Cisco ONS 15600 Reference Manual, R6.0
8.3.1 Two-Fiber BLSRs
= Fiber 1
= Fiber 2
8-3
Advertisement
Chapters
Table of Contents
