Table of Contents
Advertisement
To override nameserver settings for DHCP, follow these steps.
a.
In the DNS section, choose Specify nameservers.
b. Enter the IP addresses of the nameservers that you want to
use for DNS. You can specify up to three DNS nameservers.
c.
Click Apply network settings.
Click Install.
S
5
TEP
Confirm that the customer name and address match the customer
S
6
TEP
you are installing.
Click Complete Install.
S
7
TEP
The system will automatically update the OnPlus Network Agent
with the customer's profile information and upgrade the software
as needed. Status messages are displayed so that you can track
system setup progress. The OnPlus Network Agent restarts twice
during the process, which can take up to 15 or 20 minutes.
When the activation is completed, the Cisco OnPlus Management
Utility login page displays.
You can log in to the OnPlus Network Agent to view system status.
a.
In the Username field, enter admin.
b. In the Password field, enter the password for the Cisco OnPlus
Network Agent Management Utility. This password is
displayed on the Customer > Profile page on the
Cisco OnPlus Portal.
c.
Click Log in.
If the installation was successful, the System Status page displays
and indicates that the Account Status is OK.
Cisco ON100 Network Agent Quick Start Guide
11
Advertisement
Table of Contents
