hit counter script
Cisco ASR 9001-S Overview And Reference Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. ASR 9912
  6. Overview and reference manual

Cisco ASR 9001-S Overview And Reference Manual

Asr 9000 series aggregation services router
Hide thumbs Also See for ASR 9001-S:
Table of Contents

Advertisement

Quick Links

Cisco ASR 9000 Series
Aggregation Services Router
Overview and Reference Guide
September 2013
Cisco Systems, Inc.
www.cisco.com
Cisco has more than 200 offices worldwide.
Addresses, phone numbers, and fax numbers
are listed on the Cisco website at
www.cisco.com/go/offices.
Text Part Number: OL-17501-09

Advertisement

Table of Contents
loading

Related Manuals for Cisco ASR 9001-S

Summary of Contents for Cisco ASR 9001-S

  • Page 1 Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide September 2013 Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco website at www.cisco.com/go/offices. Text Part Number: OL-17501-09...
  • Page 2 Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.

  • Page 3: Table Of Contents

    Line Card Ejector Levers 1-33 Power System 1-33 Line Card Front Panel and Access Ports 1-33 Line Card Serviceability 1-33 Line Card Ejector Levers 1-33 Power System 1-33 Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide OL-17501-09...
  • Page 4 4-Port 10-Gigabit Ethernet (4x10GE) Line Card 2-28 8-port 10-Gigabit Ethernet (8x10GE) 80-Gbps Line Rate Card 2-30 2-Port 10-Gigabit Ethernet + 20-port 1-Gigabit Ethernet (2x10GE + 20x1GE) Combination Line Card 2-32 Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide OL-17501-09...
  • Page 5 Cisco ASR 9010 Router Fan Trays 2-76 Cisco ASR 9006 Router Fan Trays 2-76 Cisco ASR 9904 Router Fan Tray 2-77 Cisco ASR 9922 Router and Cisco ASR 9912 Router Fan Trays 2-78 Status Indicators 2-79 Fan Tray Servicing 2-79...
  • Page 6 AC Power Redundancy DC Power Redundancy Detection and Reporting of Power Problems Cooling System Redundancy Cooling Failure Alarm Technical Specifications A P P E N D I X Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide OL-17501-09...
  • Page 7 Figure 1-28 FC Card Front Panel 1-31 Figure 1-29 Front System View of Power Trays—Cisco ASR 9010 Router with Version 1 Power Trays 1-34 Figure 1-30 Front System View of Power Trays—Cisco ASR 9010 Router with Version 2 Power Trays...
  • Page 8 Front System View of Power Tray—Cisco ASR 9904 Router with Version 2 Power Tray 1-35 Figure 1-32 Front System View of Power Trays —Cisco ASR 9922 Router with Version 2 Power Trays 1-36 Figure 2-1 Cisco ASR 9010 Router, Cisco ASR 9006 Router, and Cisco ASR 9904 Router Platform Architecture...
  • Page 9 Figure 2-60 DC Power Tray Rear Panel 2-69 Figure 2-61 DC Power Tray Rear Panel - Cisco ASR 9006 Router and Cisco ASR 9904 Router with Version 2 Power System 2-69 Figure 2-62 DC Power tray Power Feed Indicator —Version 1 Power System...
  • Page 10 Cisco ASR 9006 Router Fan Tray 2-77 Figure 2-71 Cisco ASR 9904 Router Fan Tray 2-78 Figure 2-72 Cisco ASR 9922 Router and Cisco ASR 9912 Router Fan Tray 2-79 Figure 2-73 Cisco ASR 9010 Router Chassis Air Filter 2-80 Figure 2-74...
  • Page 11 RSP LED Matrix CAN Bus Controller Status Display 2-14 Table 2-6 FC Card LED Display Definitions 2-21 Table 2-7 Ethernet Line Cards Available for the Cisco ASR 9000 Series Routers 2-21 Table A-1 Cisco ASR 9010 Router Physical Specifications Table A-2 Cisco ASR 9006 Router Physical Specifications...
  • Page 12 Tables Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide OL-17501-09...

  • Page 13: Preface

    The reader should also be familiar with electronic circuitry and wiring practices, and have experience as an electronic or electromechanical technician. Related Documentation For more information on the Cisco ASR 9000 Series Aggregation Services Router, additional documents found at: http://www.cisco.com/en/US/products/ps9853/prod_installation_guides_list.html...

  • Page 14: Document Conventions

    Information added about the new 8-port 10-GE Modular Port Adapter (MPA). OL-17501-06 September 2012 Information added about the new Cisco ASR 9922 Router, RP card, FC card, and the new 1-port 40-GE Modular Port Adapter (MPA), the new 36-Port 10-Gigabit Ethernet Line Card and the new 1-Port 100-Gigabit Ethernet Line Card.

  • Page 15: Obtaining Additional Information And Support

    Cisco technical documentation: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed, and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service, and Cisco currently supports RSS Version 2.0.
  • Page 16 Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide -xvi OL-17501-09...
  • Page 17 C H A P T E R Overview and Physical Description This chapter provides an overview of the Cisco ASR 9000 Series Aggregation Services Routers and description of the system components. Chassis Physical Overview, page 1-1 • Rack-Mounting Considerations, page 1-9 •...

  • Page 18: Overview And Physical Description

    Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide Cisco ASR 9010 Router The Cisco ASR 9010 Router chassis is centered around a redundant pair of RSP cards, along with eight line cards. The 10-slot chassis size fits in Telco, EIA, and ETSI racks and cabinets.

  • Page 19: Figure 1-2 Cisco Asr 9010 Router Chassis Components-Version 2 Power Trays

    Rack mount bracket reserved for redundant RSPs Eight slots (four on each side) for line cards Two fan trays Front air intake Eight AC/DC or DC/DC power modules Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide OL-17501-09...

  • Page 20: Cisco Asr 9006 Router

    Chassis Physical Overview Cisco ASR 9006 Router The Cisco ASR 9006 Router chassis is centered around a redundant pair of RSP cards, along with four line cards. The 6-slot chassis size fits in Telco, EIA, and ETSI racks and cabinets.

  • Page 21: Cisco Asr 9904 Router

    FC cards, and twenty line cards. The 22-slot chassis size fits in Telco, EIA, and ETSI racks and cabinets. The Cisco ASR 9922 Router chassis has two backplanes connected via up to seven FC cards and two RP cards. The upper backplane connects to its one backplane identification (BPID) card, ten line cards, two fan trays, and four power trays.

  • Page 22: Figure 1-6 Cisco Asr 9922 Router Chassis Components

    Two fan trays Two edge slots Seven center slots reserved for reserved for redundant redundant RPs fabric controller cards Two fan trays Ten slots for line cards Rear air exhaust Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide OL-17501-09...

  • Page 23: Cisco Asr 9912 Router

    Chassis Physical Overview Cisco ASR 9912 Router The Cisco ASR 9912 Router chassis is centered around a redundant pair of RP cards, seven redundant FC cards, and ten line cards. The chassis fits in Telco, EIA, and ETSI racks and cabinets.

  • Page 24: Field Replaceable Units

    Chapter 1 Overview and Physical Description Chassis Physical Overview Field Replaceable Units In the Cisco ASR 9010 Router, Cisco ASR 9006 Router, and Cisco ASR 9904 Router, the following components are field replaceable units (FRUs): • All line cards •...

  • Page 25: Rack-Mounting Considerations

    ETSI 45 RU rack with a height of 78.74 inches (200.00 cm). The Cisco ASR 9922 Router chassis height is 77.00 inches (195.58 cm) or 44 RU (rack units). The rail mounting option height is 1.00 inch. The Cisco ASR 9922 Router chassis will fit into an ETSI 45 RU rack with a height of 78.74 inches (200.00 cm).
  • Page 26 Cisco ASR 9010 Router Chassis Footprint Dimensions—Top Down View Rear of chassis 17.38 in (44.15 cm) 23.21 in 28.93 in (58.95 cm) (73.48 cm) 5.04 in (12.80 cm) 18.92 in (48.06 cm) Front of chassis Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 1-10 OL-17501-09...

  • Page 27: Figure 1-9 Cisco Asr 9006 Router Chassis Footprint Dimensions—Top Down View

    Cisco ASR 9006 Router Chassis Footprint Dimensions—Top Down View Rear of chassis 17.38 in (44.15 cm) 28.93 in (73.48 cm) Rack mounting surface 5.73 in (14.55 cm) Front of chassis Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 1-11 OL-17501-09...

  • Page 28: Figure 1-10 Cisco Asr 9904 Router Chassis Footprint Dimensions-Top Down View

    (63.54 cm) 6.00 in 6.00 in (15.24 cm) (15.24 cm) Rack mounting surface 2.45 in (6.22 cm) 2.282 in (5.79 cm) 18.97 in (48.19 cm) Front of chassis Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 1-12 OL-17501-09...

  • Page 29: Figure 1-11 Cisco Asr 9922 Router Chassis Footprint Dimensions—Top Down View

    Cisco ASR 9922 Router Chassis Footprint Dimensions—Top Down View Rear of chassis 30.11 in 22 in (76.48 cm) (55.88 cm) 5.05 in (13.97 cm) 17.60 in (44.70 cm) Front of chassis Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 1-13 OL-17501-09...

  • Page 30: Chassis Slots

    All Cisco ASR 9006 Router and Cisco ASR 9904 Router chassis line cards and RSP cards are front-facing and mounted horizontally, with ejector levers and captive screws at the left and right ends of each card.
  • Page 31 Overview and Physical Description Rack-Mounting Considerations All Cisco ASR 9912 Router chassis RP, FC, and line cards are front-facing and mounted vertically, with ejector levers and captive screws at the top and bottom of each card. The chassis components include: Two RSP cards in the Cisco ASR 9010 Router, Cisco ASR 9006 Router, and •...

  • Page 32: Fiber And Interface Cable Management

    Fiber and Interface Cable Management Figure 1-13 shows how card interface cables are managed at the front of the Cisco ASR 9010 Router chassis using a cable management tray. Figure 1-13...

  • Page 33: Routing Of Dc Power Tray Source Cables

    A cable tie down point is provided. Figure 1-15 shows the DC power cable routing on the power trays. Figure 1-15 Routing of DC Power Tray Source Cables Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 1-17 OL-17501-09...

  • Page 34: Slot Numbering And Marking

    ID labels. Figure 1-16 shows slot ID numbering for the Cisco ASR 9010 Router with version 1 power trays. Figure 1-17 shows slot ID numbering for the Cisco ASR 9010 Router with version 2 power trays.
  • Page 35 Cisco ASR 9010 Router Slot ID Numbering—Version 2 Power Trays RSP cards Line cards 0-3 Line cards 4-7 0 1 2 3 4 5 6 7 Fan trays Front air intake Power shelves Power modules Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 1-19 OL-17501-09...

  • Page 36: Figure 1-18 Cisco Asr 9006 Router Slot Id Numbering-Version 1 Power Tray

    Overview and Physical Description Rack-Mounting Considerations Figure 1-18 shows slot ID numbering for the Cisco ASR 9006 Router with the version 1 power tray. Figure 1-19 shows slot ID numbering for the Cisco ASR 9006 Router with the version 2 power tray.

  • Page 37: Figure 1-20 Cisco Asr 9904 Router Slot Id Numbering-Version 2 Power Tray

    Note For the Cisco ASR 9922 Router, line cards must be installed upside down in slots 10 through 19 of the bottom card cage, whereas in slots 0 though 9 of the top card cage, the line cards are installed right side...

  • Page 38: Figure 1-21 Cisco Asr 9922 Router Components And Slot Numbering

    Overview and Physical Description Rack-Mounting Considerations Figure 1-21 Cisco ASR 9922 Router Components and Slot Numbering Power modules Power shelves/trays Line cards Fan trays Fan trays Line cards Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 1-22 OL-17501-09...

  • Page 39: Power Module Hardware And Software Identification

    IDs and the corresponding software IDs for the power modules. Table 1-1 Power Module Hardware and Software IDs Hardware ID Software ID PS0 M0 PS0 M1 PS0 M2 PS0 M3 PS1 M0 Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 1-23 OL-17501-09...

  • Page 40: Route Switch Processor And Route Processor Cards

    RSP fail. The RP card is the main control element in the Cisco ASR 9922 Router and Cisco ASR 9912 Router. The RP card provides centralized chassis control, management, and data-plane switching. To provide redundancy, there are two RP cards in each router, one as the active control RP and the other as the standby RP.

  • Page 41: Figure 1-23 Rsp Card Front Panel

    Overview and Physical Description Route Switch Processor and Route Processor Cards Figure 1-23 shows the front panel of the RSP card. Figure 1-23 RSP Card Front Panel Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 1-25 OL-17501-09...

  • Page 42: Figure 1-24 Rsp-440 Card Front Panel

    ToD port Alarm Cutoff (ACO) and Lamp Test push buttons 10 MHz and 1 PPS indicators Eight discrete LED indicators Alarm Out DB9 connector LED matrix display Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 1-26 OL-17501-09...

  • Page 43: Rp Front Panel And Access Ports

    ACO LED (amber) – SYNC LED (green and amber) – One 4-character 5x7 LED dot-matrix display • Figure 1-25 shows the front panel of the RP card. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 1-27 OL-17501-09...

  • Page 44: Figure 1-25 Rp Card Front Panel

    Inter-chassis nv Sync1 GPS ToD Nine discrete LED indicators 10 MHz and 1 PPS indicators LED matrix display Alarm Out DB9 connector Figure 1-26 shows the RP card. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 1-28 OL-17501-09...

  • Page 45: Management Features

    Each RSP/RP card drives a set of three alarm output contacts. Alarm circuitry on the RSP/RP card activates dry contact closures that are accessible through a nine-pin connector on the RSP/RP faceplate. Both normally open and normally closed contacts are available. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 1-29 OL-17501-09...

  • Page 46: Serviceability

    RSP/RP cards than for the line cards due to the higher pin count of the RSP/RP card. Fabric Controller Card On the Cisco ASR 9922 Router and Cisco ASR 9912 Router, the switch fabric has been moved to FC cards.

  • Page 47: Figure 1-27 Fc Card

    FC card. The front panel has a status LED, ejector levers, ejector lever release buttons, and mounting screws. Figure 1-28 FC Card Front Panel Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 1-31 OL-17501-09...

  • Page 48: Fc Card Ejector Levers

    (OIR) to restart the FC card. Ethernet Line Cards This set of line cards for the Cisco ASR 9000 Series Routers is based on a single base card containing the processors, fabric interface, power, and forwarding circuitry. Mounted on the base card are daughter cards containing I/O circuitry.

  • Page 49: Line Card Front Panel And Access Ports

    Power System The Cisco ASR 9000 Series Routers can be powered with an AC or DC source power. The power system The Cisco ASR 9000 Series Routers can be powered with an AC or DC source power. The power system provides power for the cards and fan trays.

  • Page 50: Ac And Dc Power Modules

    Power System AC and DC Power Modules Each AC or DC power tray houses up to four power modules. The AC and DC power trays in the Cisco ASR 9006 Router and Cisco ASR 9904 Router provide • N+1 redundancy.

  • Page 51: Figure 1-30 Front System View Of Power Trays-Cisco Asr 9010 Router With Version 2 Power Trays

    Front System View of Power Trays—Cisco ASR 9010 Router with Version 2 Power Trays The Cisco ASR 9006 Router and Cisco ASR 9904 Router are similar, except that: The Cisco ASR 9006 Router supports one power tray with up to three version 1 power modules or • four version 2 power modules.

  • Page 52: Cooling System

    They are covered by a fan tray door hinged at the bottom, which must be opened before removing the fan trays. In the Cisco ASR 9904 Router, a single fan tray is located in the rear, right side of the card cage and is equipped with a handle for easy insertion.

  • Page 53: Cooling Path

    • the Cisco ASR 9904 Router chassis. The inlet is at the right side of the chassis, and the exhaust is at the left side. If the router is installed in a 2-post 23-inch rack, air flow is circulated front-to-back. An optional air baffle accessory kit (ASR-9904-BAFFLE=) is available for mounting the router chassis in this configuration.
  • Page 54 Craft Works Interface (CWI), a graphical craft tool for performance monitoring, is embedded with the Cisco IOS XR software and can be downloaded through the HTTP protocol. You can use CWI to edit the router configuration file, open Telnet/SSH application windows, and create user-defined applications.

  • Page 55: Router Operation

    Router Operation The Cisco ASR 9000 Series Routers are fully distributed routers that use a switch fabric to interconnect a series of chassis slots, each of which can hold one of several types of line cards. Each line card in the Cisco ASR 9000 Series has integrated I/O and forwarding engines, plus sufficient control plane resources to manage line card resources.

  • Page 56: Chapter 2 Functional Description

    RSP 0 Switch Fabric RSP 1 Route Processor Figure 2-2 shows the platform architecture of the Cisco ASR 9922 Router and Cisco ASR 9912 Router. Figure 2-2 Cisco ASR 9922 Router and Cisco ASR 9912 Router Platform Architecture Distributed Distributed...

  • Page 57: Figure 2-3 Major System Components And Interconnections In The Cisco Asr 9000 Series Routers

    Chapter 2 Functional Description Router Operation Figure 2-3 Major System Components and Interconnections in the Cisco ASR 9000 Series Routers RSP 0 RSP 1 Fabric Fabric Interface Interface Chip Chip Data Plane Control Plane System Fabric System Fabric Timing Chip...
  • Page 58 Additional System Components in the Cisco ASR 9000 Series Routers Backplane 16x10GE SFP+ Line Card Fabric Fabric Interface Interface Chip Chip FPGA FPGA NPU NPU NPU NPU NPU NPU NPU NPU NPUs FPGAs Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide OL-17501-09...

  • Page 59: Route Switch Processor Card

    Module Route Switch Processor Card The RSP card is the main control and switch fabric element in the Cisco ASR 9010 Router, Cisco ASR 9006 Router, and Cisco ASR 9904 Router chassis. The RSP card provides system control, packet switching, and timing control for the system. To provide redundancy, there can be two RSP cards in the system, one as the active control RSP and the other as the standby RSP.
  • Page 60 Compact Flash type I/II CONSOLE and AUX ports Alarm Cutoff (ACO) and LAMP TEST push buttons SYNC (BITS/J.211) ports Eight discrete LED indicators Alarm Out DB9 connector LED matrix display Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide OL-17501-09...

  • Page 61: Figure 2-7 Rsp-440 Card Front Panel

    CONSOLE and AUX ports ToD port Alarm Cutoff (ACO) and LAMP TEST push buttons 10MHz and 1PPS indicators Eight discrete LED indicators Alarm Out DB9 connector LED matrix display Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide OL-17501-09...

  • Page 62: Route Processor Card

    Route Processor Card The RP card is the main control element in the Cisco ASR 9922 Router and Cisco ASR 9912 Router chassis. The switch fabric element has been moved to the FC cards. The RP card provides system control, packet switching, and timing control for the system.

  • Page 63: Front Panel Connectors

    RSP/RP card contains a Synchronous Equipment Timing Source (SETS) that can receive a frequency reference from an external BITS timing interface or from a clock signal recovered from any incoming Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide OL-17501-09...

  • Page 64: Rp Usb Port

    No minor alarm has occurred. (Default after reset) Synchronization Green System timing is synchronized to an external timing source. (SYNC) Amber System timing is free running. LED never turns off. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-10 OL-17501-09...
  • Page 65 Alarm Cutoff has been enabled. The ACO push button was pressed after at (ACO) least one alarm has occurred. Alarm Cutoff is not enabled. (Default after reset) Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-11 OL-17501-09...

  • Page 66: Led Matrix Display

    Card is inserted and microcontroller is initialized. BOOT Card is powered on and CPU is booting. IMEM Starting initialization of memory. IGEN Starting initialization of card. ICBC Initializing communication with the microcontroller. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-12 OL-17501-09...
  • Page 67 The RSP/RP is loading (MBI started and card preparing for activity). INCP The software or configuration is incompatible with the RSP/RP. OOSM The RSP/RP is in Out of Service, Maintenance mode. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-13 OL-17501-09...

  • Page 68: Led Matrix Can Bus Controller Error Display

    Cisco ASR 9010 Router, Cisco ASR 9006 Router, and Cisco ASR 9904 Router. In the Cisco ASR 9922 Router and Cisco ASR 9912 Router, the route processor functions are on the RP card. whereas the switch fabric is on the FC card. The RSP/RP card also provides shared resources for backplane Ethernet, timing, and chassis control.

  • Page 69: Figure 2-9 Switch Fabric Interconnections

    In the Cisco ASR 9922 Router and Cisco ASR 9912 Router, the switch fabric element has been moved to dedicated FC cards that connect to the backplanes alongside the RP cards. The switch fabric is capable of delivering 550-Gbps per line card slot.

  • Page 70: Unicast Traffic

    Multicast traffic is replicated in the switch fabric. For multicast (including unicast floods), the Cisco ASR 9000 Series Routers replicate the packet as necessary at the divergence points inside the system, so that the multicast packets can replicate efficiently without having to burden any particular path with multiple copies of the same packet.

  • Page 71: Route Processor Functions

    Route Processor Functions The Route Processor performs the ordinary chassis management functions. The Cisco ASR 9000 Series Routers run Cisco IOS XR software, so the Route Processor runs the centralized portions of the software for chassis control and management. Secondary functions of the Route Processor include boot media, system timing (frequency and time of date) synchronization, precision clock synchronization, backplane Ethernet communication, and power control (through a separate CAN bus controller network).

  • Page 72: Processor-To-Processor Communication

    Processor through a Gigabit Ethernet interface through a packet diversion FPGA. This path is used for external traffic diverted to the RSP card by line card network processors. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-18...

  • Page 73: Fabric Controller Card

    External traffic is diverted to the Route Processor by the line card network processors. The RP and FC cards in the Cisco ASR 9922 Router have control interface chips and FICs attached to the backplanes that provide control plane and punt paths.

  • Page 74: Figure 2-14 Fc Card

    FC card. The front panel has a status LED, ejector levers, ejector lever release buttons, and mounting screws. Figure 2-15 FC Card Front Panel Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-20 OL-17501-09...

  • Page 75: Fc Card Front Panel Indicator

    FC card powered off via CLI. (Default after reset) Ethernet Line Cards Table 2-7 lists the Ethernet line cards available for the Cisco ASR 9000 Series Routers. Table 2-7 Ethernet Line Cards Available for the Cisco ASR 9000 Series Routers Line Card...

  • Page 76: Functional Description

    6. QSFP+ = 40-Gigabit Ethernet quad small form-factor pluggable transceiver module Functional Description Ethernet line cards for the Cisco ASR 9000 Series Routers provide forwarding throughput of line rate for packets as small as 64 bytes. The small form factor pluggable (SFP, SFP+, QSFP+, XFP, or CFP) transceiver module ports are polled periodically to keep track of state changes and optical monitor values.

  • Page 77: Figure 2-16 General Line Card Data Plane Block Diagram

    CPU or to the RSP/RP fabric card through two bridge FPGAs and the fabric interface chip. The total bandwidth of the path from four NPUs to two bridge FPGAs is 60-Gbps. The total bandwidth of Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-23...

  • Page 78: 40-Port Gigabit Ethernet (40X1Ge) Line Card

    40-Port Gigabit Ethernet (40x1GE) Line Card Block Diagram 10 x SFP FPGA 10 x SFP Fabric Interface Chip 10 x SFP FPGA 10 x SFP 40x1GE Line Card Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-24 OL-17501-09...
  • Page 79 Port 0 SFP cage Port 39 SFP cage Port Status LED (one per port) Port 1 SFP cage Port 38 SFP cage Captive installation screw (one of two) Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-25 OL-17501-09...

  • Page 80: 8-Port 10-Gigabit Ethernet (8X10Ge) 2:1 Oversubscribed Line Card

    8-Port 10-Gigabit Ethernet (8x10GE) 2:1 Oversubscribed Line Card Block Diagram 10GE XFP 10GE XFP FPGA 10GE XFP 10GE XFP Fabric Interface Chip 10GE XFP 10GE XFP FPGA 10GE XFP 10GE XFP 8x10GE Line Card Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-26 OL-17501-09...

  • Page 81: Figure 2-20 8-Port 10-Gigabit Ethernet (8X10Ge) 2:1 Oversubscribed Line Card Front Panel

    Ejector lever (one of two) Port 7 XFP cage Port 0 XFP cage Line Card Status LED Port Status LED (one per port) Captive installation screw (one of two) Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-27 OL-17501-09...

  • Page 82: 4-Port 10-Gigabit Ethernet (4X10Ge) Line Card

    Figure 2-21 4-Port 10-Gigabit Ethernet (4x10GE) Line Card Block Diagram 10GE XFP FPGA 10GE XFP Fabric Interface Chip 10GE XFP FPGA 10GE XFP 4x10GE Line Card Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-28 OL-17501-09...

  • Page 83: Figure 2-22 4-Port 10-Gigabit Ethernet (4X10Ge) Line Card Front Panel

    Ejector lever (one of two) Port 3 XFP cage Port 0 XFP cage Line Card Status LED Port Status LED (one per port) Captive installation screw (one of two) Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-29 OL-17501-09...

  • Page 84: 8-Port 10-Gigabit Ethernet (8X10Ge) 80-Gbps Line Rate Card

    10GE XFP Fabric Interface FPGA Chip 10GE XFP 10GE XFP 10GE XFP 10GE XFP Fabric Interface FPGA Chip 10GE XFP 10GE XFP 8x10GE 80G Line Rate Card Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-30 OL-17501-09...

  • Page 85: Figure 2-24 8-Port 10-Gigabit Ethernet (8X10Ge) 80-Gbps Line Rate Card Front Panel

    Ejector lever (one of two) Port 7 XFP cage Port Status LED (one per port) Line Card Status LED Port 0 XFP cage Captive installation screw (one of two) Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-31 OL-17501-09...

  • Page 86: Figure 2-25 2-Port 10-Gigabit Ethernet + 20-Port Gigabit Ethernet (2X10Ge + 20X1Ge) Combination Line Card Block

    Line Card Block Diagram To FPGAs To NPUs 10GE XFP FPGA 10GE XFP Fabric Interface Chip 10x1GE SFP FPGA 10x1GE SFP 2x10GE + 20x1GE Combination Line Card Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-32 OL-17501-09...

  • Page 87: Figure 2-26 2-Port 10-Gigabit Ethernet + 20-Port 1-Gigabit Ethernet (2X10Ge + 20X1Ge) Combination Line Card Front Panel

    1GE Port 19 SFP cage 1GE Port 0 SFP cage 1GE Port 1 SFP cage SFP Port Status LED (one per SFP port) 10 Captive installation screw (one of two) Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-33 OL-17501-09...

  • Page 88: 16-Port 10-Gigabit Ethernet (16X10Ge) Oversubscribed Line Card

    SFP+ 10G PHY SFP+ Fabric 10G PHY SFP+ Interface FPGA 10G PHY SFP+ Chip 10G PHY SFP+ 10G PHY SFP+ 10G PHY SFP+ 16x10GE SFP+ Line Card Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-34 OL-17501-09...

  • Page 89: Figure 2-28 16-Port 10-Gigabit Ethernet (16X10Ge) Oversubscribed Line Card Front Panel

    Port 0 SFP+ cage Port 15 SFP+ cage Port Status LED (one per port) Port 7 SFP+ cage Port 8 SFP+ cage Captive installation screw (one of two) Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-35 OL-17501-09...

  • Page 90: 24-Port 10-Gigabit Ethernet Line Card

    The Link LED indicates the status of the associated SFP+ port. Figure 2-29 shows the front panel and connectors of the 24-port 10-Gigabit Ethernet line card. Figure 2-29 24-Port 10-Gigabit Ethernet Line Card Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-36 OL-17501-09...

  • Page 91: Figure 2-30 24-Port 10-Gigabit Ethernet (24X10Ge) Line Card Front Panel

    Chapter 2 Functional Description Ethernet Line Cards Figure 2-30 24-port 10-Gigabit Ethernet (24x10GE) Line Card Front Panel Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-37 OL-17501-09...

  • Page 92: 36-Port 10-Gigabit Ethernet Line Card

    With two RP cards installed in the Cisco ASR 9922 Router, the 36-port10-Gigabit Ethernet line card runs at line rate. With a single RP card installed in the Cisco ASR 9922 Router, the 36-port 10-Gigabit Ethernet line card is a 220-Gbps line rate card.

  • Page 93: Figure 2-31 36-Port 10-Gigabit Ethernet (36X10Ge) Line Card Front Panel

    Chapter 2 Functional Description Ethernet Line Cards Figure 2-31 36-Port 10-Gigabit Ethernet (36x10GE) Line Card Front Panel Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-39 OL-17501-09...

  • Page 94: 2-Port 100-Gigabit Ethernet Line Card

    Each CFP cage on the 2-port 100-GE line card has an adjacent Link LED visible on the front panel. The Link LED indicates the status of the associated CFP port. Figure 2-32 shows the front panel and connectors of the 2-port 100-GE line card. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-40 OL-17501-09...

  • Page 95: Figure 2-32 2-Port 100-Gigabit Ethernet (2X100Ge) Line Card Front Panel

    Ejector lever (one of two) 100-GE CFP connector (two of two) Captive installation screw (one of two) Line Card Status LED 100-GE CFP connector (one of two) Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-41 OL-17501-09...

  • Page 96: 1-Port 100-Gigabit Ethernet Line Card

    The CFP cage has an adjacent Link LED visible on the front panel. The Link LED indicates the status of the CFP port. Figure 2-33 shows the front panel of the 1-port 100-GE line card. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-42 OL-17501-09...

  • Page 97: Figure 2-33 1-Port 100-Gigabit Ethernet (1X100Ge) Line Card Front Panel

    Figure 2-33 1-Port 100-Gigabit Ethernet (1x100GE) Line Card Front Panel Ejector lever (one of two) 100-GE Port Captive installation screw (one of two) Line Card Status LED Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-43 OL-17501-09...

  • Page 98: Modular Line Cards

    Each SFP cage on the Gigabit Ethernet MPA has an adjacent A/L LED visible on the front panel. The A/L LED indicates the status of the associated SFP port. Figure 2-35 shows an example of the 20-port Gigabit Ethernet MPA. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-44 OL-17501-09...

  • Page 99: 8-Port 10-Gigabit Ethernet Modular Port Adapter

    The 8-Port 10-Gigabit Ethernet modular port adapter is not supported on the 80-Gigabyte Modular • Line Card (A9K-MOD80-TR and A9K-MOD80-SE). The 8-Port 10-Gigabit Ethernet modular port adapter is not supported on the Cisco ASR 9001 • Router. Each SFP+ cage on the 8-Port 10-Gigabit Ethernet modular port adapter has an adjacent A/L (Active/Link) LED visible on the front panel.

  • Page 100: 4-Port 10-Gigabit Ethernet Modular Port Adapter

    Each XFP cage on the 4-Port 10-Gigabit Ethernet MPA has an adjacent A/L LED visible on the front panel. The A/L LED indicates the status of the associated XFP port. Figure 2-37 shows an example of the 4-Port 10-Gigabit Ethernet MPA. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-46 OL-17501-09...

  • Page 101: 2-Port 10-Gigabit Ethernet Modular Port Adapter

    Each XFP cage on the 2-Port10-Gigabit Ethernet MPA has an adjacent A/L LED visible on the front panel. The A/L LED indicates the status of the associated XFP port. Figure 2-38 shows an example of the 2-port10-Gigabit Ethernet MPA. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-47 OL-17501-09...

  • Page 102: 2-Port 40-Gigabit Ethernet Modular Port Adapter

    Each QSFP+ cage on the 2-Port 40-Gigabit Ethernet MPA has an adjacent A/L LED visible on the front panel. The A/L LED indicates the status of the associated QSFP+ port. Figure 2-39 shows an example of the 2-Port 40-Gigabit Ethernet MPA. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-48 OL-17501-09...

  • Page 103: 1-Port 40-Gigabit Ethernet Modular Port Adapter

    (Active/Link) LED visible on the front panel. The A/L LED indicates the status of the associated QSFP+ port. Refer to Figure 2-40 below for an example of the 1-Port 40-Gigabit Ethernet modular port adapter. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-49 OL-17501-09...

  • Page 104: Power System Functional Description

    Power System Functional Description The Cisco ASR 9000 Series Routers can be powered with an AC or DC source power. The power system is based on a distributed power architecture centered around a –54 VDC printed circuit power bus on the system backplane.

  • Page 105: Figure 2-41 Cisco Asr 9010 Router Ac Power System Block Diagram-Version 1 Power System

    The Cisco ASR 9000 Series Routers have two available DC version 1 power modules, a 2100 W module and a 1500 W module. Both types of power modules can be used in a single chassis. The Cisco ASR 9000 Series Routers have one available DC version 2 power module (2100 W).

  • Page 106: Figure 2-42 Cisco Asr 9010 Router Ac Power System Block Diagram-Version 2 Power System

    Chapter 2 Functional Description Power System Functional Description Figure 2-42 Cisco ASR 9010 Router AC Power System Block Diagram—Version 2 Power System AC Power Shelf-0 Power Distribution Fan Tray 0 w/AC/DC Power Supply Modules Backplane AC/DC Pwr Sply AC1-1 Soft-Start Controller –54V...

  • Page 107: Figure 2-43 Cisco Asr 9010 Router Dc Power System Block Diagram-Version 1 Power System

    Chapter 2 Functional Description Power System Functional Description Figure 2-43 Cisco ASR 9010 Router DC Power System Block Diagram—Version 1 Power System DC Power Shelf-1 Power Distribution Fan Tray 0 with DC/DC Power Supply Backplane Modules TB-A1 DC-A1 DC/DC Soft-Start Controller –54V...

  • Page 108: Figure 2-44 Cisco Asr 9010 Router Dc Power System Block Diagram-Version 2 Power System

    Chapter 2 Functional Description Power System Functional Description Figure 2-44 Cisco ASR 9010 Router DC Power System Block Diagram—Version 2 Power System DC Power Shelf-1 Power Distribution Fan Tray 0 with DC/DC Power Supply Backplane Modules TB-A1 DC-A1 DC/DC Soft-Start Controller –54V...

  • Page 109: Figure 2-45 Cisco Asr 9006 Router Ac Power System Block Diagram-Version 1 Power System

    Figure 2-47 Figure 2-48 show block diagrams of the Cisco ASR 9006 Router DC power system with version 1 and version 2 power systems. Figure 2-45 Cisco ASR 9006 Router AC Power System Block Diagram—Version 1 Power System AC Power Shelf with...

  • Page 110: Figure 2-46 Cisco Asr 9006 Router Ac Power System Block Diagram-Version 2 Power System

    Chapter 2 Functional Description Power System Functional Description Figure 2-46 Cisco ASR 9006 Router AC Power System Block Diagram—Version 2 Power System AC Power Shelf with Power Distribution Fan Tray 0 AC/DC Power Supply Modules Backplane AC/DC Pwr Sply AC1-1...

  • Page 111: Figure 2-47 Cisco Asr 9006 Router Dc Power System Block Diagram-Version 1 Power System

    Chapter 2 Functional Description Power System Functional Description Figure 2-47 Cisco ASR 9006 Router DC Power System Block Diagram—Version 1 Power System DC/DC Power Shelf Power Distribution Fan Tray 0 connected to 3 Power Supply Backplane Modules TB-A1 DC-A1 DC/DC...

  • Page 112: Figure 2-48 Cisco Asr 9006 Router Dc Power System Block Diagram-Version 2 Power System

    Circuit, EMI Filter Cooling Fans Figure 2-49 Figure 2-50 shows block diagrams of the Cisco ASR 9904 Router with the AC and DC version 2 power system. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-58 OL-17501-09...

  • Page 113: Figure 2-49 Cisco Asr 9904 Router Ac Power System Block Diagram-Version 2 Power System

    Chapter 2 Functional Description Power System Functional Description Figure 2-49 Cisco ASR 9904 Router AC Power System Block Diagram—Version 2 Power System AC Power Shelf with Power Distribution Line Card (x1) AC/DC Power Supply Modules Backplane Narrow AC/DC Range, Pwr Sply...

  • Page 114: Figure 2-50 Cisco Asr 9904 Router Dc Power System Block Diagram-Version 2 Power System

    -54V Circuit, EMI Filter Cooling Fans Figure 2-51 Figure 2-52 show block diagrams of the Cisco ASR 9922 Router with AC and DC version 2 power systems. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-60 OL-17501-09...

  • Page 115: Figure 2-51 Cisco Asr 9922 Router Ac Power System Block Diagram-Version 2 Power System

    Chapter 2 Functional Description Power System Functional Description Figure 2-51 Cisco ASR 9922 Router AC Power System Block Diagram—Version 2 Power System Power Distribution AC Power Shelf-0 w/AC/DC 3KW Power Supply Modules AC1-1 220V Filter 20A 1Ø -54V AC1-2 220V Filter 20A 1Ø...

  • Page 116: Figure 2-52 Cisco Asr 9922 Router Dc Power System Block Diagram-Version 2 Power System

    Chapter 2 Functional Description Power System Functional Description Figure 2-52 Cisco ASR 9922 Router DC Power System Block Diagram—Version 2 Power System Power Distribution DC Power Shelf-0 w/DC/DC 2KW Power Supply Modules DC-A1 (60A) TB-A1 DC-B1 (60A) TB-B1 -54V DC-A2 (60A)

  • Page 117: Power Modules

    2 power module. Figure 2-53 Version 1 Power Module Door and ejector lever 3 Door latch LED indicators Figure 2-54 Version 2 Power Module Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-63 OL-17501-09...

  • Page 118: Power Module Status Indicators

    Figure 2-56 shows the status indicators for the version 2 power module. The indicator definitions follow the two figures. Figure 2-55 Version 1 Power Module Status Indicators Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-64 OL-17501-09...

  • Page 119: System Power Redundancy

    Each tray can house up to four modules and can be configured for multiple power configurations. For more information about power system redundancy, see the “Power Supply Redundancy” section on page 3-3. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-65 OL-17501-09...

  • Page 120: Ac Power Trays

    I2C cable from backplane Figure 2-58 Version 2 AC Power tray Rear Panel DC output power blades I2C cable from backplane IEC input receptacles with retention brackets Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-66 OL-17501-09...

  • Page 121: Ac Tray Power Switch

    For example, to determine the maximum capacity with three power supply modules, multiply the current by three (x3). Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-67...

  • Page 122: Ac System Operation

    1 power system. Figure 2-61 shows the rear panel of the power tray for the version 2 power system. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-68 OL-17501-09...

  • Page 123: Dc Power Tray Power Feed Indicator

    Primary ground “B” feed connectors Power switch Figure 2-61 DC Power Tray Rear Panel - Cisco ASR 9006 Router and Cisco ASR 9904 Router with Version 2 Power System DC output power blades “B” feed connectors “A” feed connectors I2C cable from backplane...

  • Page 124: Dc System Operation

    DC/DC power supplies are enabled by toggling the Power On/Off logic switch located in each of the power tray to ON position. DC/DC power supply modules in the power tray provides –54 VDC output within seven seconds after the DC is applied. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-70 OL-17501-09...

  • Page 125: Power Down

    In the Cisco ASR 9010 Router, the two fan trays are located one above the other below the card cage and are equipped with handles for easy removal.

  • Page 126: Cooling Path

    Functional Description Cooling System Functional Description Cooling Path The Cisco ASR 9010 Router chassis has a front-to-rear cooling path. The inlet is at the bottom front of the chassis, and the exhaust is at the upper rear. Figure 2-64 shows the cooling path of the Cisco ASR 9010 Router chassis.
  • Page 127 RSPs and line cards Room air Power modules The Cisco ASR 9904 Router has a side-to-side cooling path. The inlet is at the right side of the cage, and the exhaust is at the left side. Figure 2-66 shows the cooling path of the Cisco ASR 9904 Router chassis.

  • Page 128: Line Cards

    Functional Description Cooling System Functional Description The cages of the Cisco ASR 9922 Router chassis have a front-to-rear cooling path. The inlet is at the front of the middle cage, and the exhaust is at the upper and lower rear.
  • Page 129 Cooling System Functional Description Figure 2-68 Cisco ASR 9912 Router Chassis Cooling Path—Side View Air exhaust Fan trays Rear Air exhaust plenum Line cards RPs and FCs Power trays Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-75 OL-17501-09...

  • Page 130: Fan Trays

    Both fan trays are required for normal system operation for the Cisco ASR 9010 Router and Note Cisco ASR 9006 Router. If both fan trays in the router are pulled out or are not installed, a critical alarm is raised.

  • Page 131: Cisco Asr 9904 Router Fan Tray

    Cisco ASR 9904 Router Fan Tray The Cisco ASR 9904 Router contains a single fan tray. If a fan tray fails, it is possible to swap a single fan tray assembly while the system is operational. Replace the missing fan tray within 4 minutes.

  • Page 132: Cisco Asr 9922 Router And Cisco Asr 9912 Router Fan Trays

    Cisco ASR 9922 Router and Cisco ASR 9912 Router Fan Trays The Cisco ASR 9922 Router contains four fan trays, and the Cisco ASR 9912 Router contains three fan trays for redundancy. The fan tray has an LED indicator to indicate fan tray status. If a fan tray fails, it is possible to swap a single fan tray assembly while the system is operational.

  • Page 133: Status Indicators

    Cooling System Functional Description Figure 2-72 Cisco ASR 9922 Router and Cisco ASR 9912 Router Fan Tray Fan tray status LED The fan tray contains 12 axial 120-mm (4.72-in) fans. There is a fan control board at the back end •...

  • Page 134: Slot Fillers

    Software cannot detect their presence. Chassis Air Filter The chassis air filters in the Cisco ASR 9000 Series Routers are NEBS compliant. The filter is not serviceable but is a field replaceable unit. Replacing the filter does not interrupt service.
  • Page 135 Chapter 2 Functional Description Cooling System Functional Description In the Cisco ASR 9006 Router, a chassis air filter is located along the right side of the chassis, and is accessible from the rear of the chassis (see Figure 2-74). Figure 2-74...

  • Page 136: Figure 2-75 Cisco Asr 9904 Router Air Filter

    Chapter 2 Functional Description Cooling System Functional Description Figure 2-75 Cisco ASR 9904 Router Air Filter Air filter Thumb screw Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-82 OL-17501-09...

  • Page 137: Figure 2-76 Asr 9922 Router Chassis Air Filters

    Chapter 2 Functional Description Cooling System Functional Description The Cisco ASR 9922 Router has three air filters on the middle cage (see Figure 2-76). The center air filter covers the front of the FC cards. The side air filters cover the RP cards.

  • Page 138: Figure 2-77 Cisco Asr 9912 Router Chassis Air Filters

    Chapter 2 Functional Description Cooling System Functional Description The Cisco ASR 9912 Router has three air filters on the RP/FC card cage (see Figure 2-77). The center air filter covers the front of the FC cards. The side air filters cover the RP cards.

  • Page 139: Figure 2-78 Cisco Asr 9922 Router Chassis Center Air Filter

    Figure 2-78 Cisco ASR 9922 Router Chassis Center Air Filter Loosen thumb screws. Remove foam filter media. Rotate and lower inner frame. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-85 OL-17501-09...

  • Page 140: Speed Control

    If the ambient air temperature is within the normal operating range, the fans operate at the lowest speed possible to minimize noise & power consumption. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-86 OL-17501-09...

  • Page 141: Servicing

    When the system reaches critical operating temperature points, it triggers a shutdown sequence of the system. System Management and Configuration The Cisco IOS XR Software on the Cisco ASR 9000 Series Routers provides the system manageability interfaces: CLI, XML, and SNMP. Cisco IOS XR Software The Cisco ASR 9000 Series Routers run Cisco IOS XR Software and use the manageability architecture of that operating system, which includes CLI, XML, and SNMP.

  • Page 142: Command-Line Interface

    The system supports CWI, a graphical craft tool for performance monitoring, configuration editing, and configuration rollback. CWI is embedded with Cisco IOS XR software and can be downloaded through the HTTP protocol. A user can use CWI to edit the router configuration file, create user-defined applications, and open Telnet/SSH application windows to provide CLI access.

  • Page 143: Mibs

    Online Diagnostics System run-time diagnostics are used by the Cisco Technical Assistance Center (TAC) or the end user to troubleshoot a field problem and assess the state of a given system. Some examples of the run-time diagnostics include the following: •...
  • Page 144 Chapter 2 Functional Description Online Diagnostics Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 2-90 OL-17501-09...

  • Page 145: Chapter 3 High Availability And Redundant Operation

    Cisco ASR 9000 Series Routers. Features Overview The Cisco ASR 9000 Series Routers are designed to have high Mean Time Between Failures (MTBF) and low Mean Time To Resolve (MTTR) rates, thus providing a reliable platform that minimizes outages or downtime and maximizes availability.

  • Page 146: Fabric Switchover

    High Availability Router Operations Fabric Switchover In the Cisco ASR 9010 Router, Cisco ASR 9006 Router, and Cisco ASR 9904 Router, the RSP card makes up most of the fabric. The fabric is configured in an “active/active” configuration model, which allows the traffic load to be distributed across both RSP cards.

  • Page 147: Process Restartability

    Power Supply Redundancy The Cisco ASR 9000 Series Routers are configured such that a power module failure or its subsequent replacement does not cause a significant outage. A power supply failure or over/under voltage at the output of a power module is detected, and an alarm raised.

  • Page 148: Ac Power Redundancy

    3000 W. For Cisco ASR 9010 Routers, the slot location of a module in the power trays is irrelevant as long as the two power trays have an equal number of modules installed (in case one tray should fail) (see Figure 3-1).

  • Page 149: Figure 3-4 Ac System Power Redundancy For The Cisco Asr 9904 Router-Version

    18,000W AC systems 6+6 max power redundancy redundancy The Cisco ASR 9010 Router, Cisco ASR 9922 Router, and Cisco ASR 9912 Router are capable of Note operating with power modules installed in only one of their power trays. However, such a configuration does not provide any redundancy.

  • Page 150: Dc Power Redundancy

    The Cisco ASR 9000 Series Routers have two available DC power modules, a 2100 W module and a 1500 W module. Both types of power modules can be used in a single chassis. See Appendix A, “Technical Specifications,”...

  • Page 151: Figure 3-9 Dc System Power Redundancy For The Cisco Asr 9006 Router Version-2

    Chapter 3 High Availability and Redundant Operation Power Supply Redundancy Figure 3-9 DC System Power Redundancy for the Cisco ASR 9006 Router Version—2 2100W DC 2100W DC 2100W DC 2100W DC 2100W DC 2100W DC 2100W DC 2100W DC 2100W DC...

  • Page 152: Detection And Reporting Of Power Problems

    The Cisco ASR 9010 Router has two fan trays at the bottom of the card tray. Each fan tray has 12 fans arranged in three groups of four fans each. Two fans of each group share a fan controller. The power supplied to the fan controller is 1:3 protected.

  • Page 153: Cooling Failure Alarm

    Cooling System Redundancy The Cisco ASR 9904 Router has a single fan tray located at the left side of the chassis and is accessible from the rear. The fan tray has 12 fans arranged in three groups of four fans each. Two fans in each group share a fan controller.
  • Page 154 Chapter 3 High Availability and Redundant Operation Cooling System Redundancy Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide 3-10 OL-17501-09...

  • Page 155: Appendix

    A P P E N D I X Technical Specifications This appendix lists specifications for the Cisco ASR 9000 Series Aggregation Services Routers. Table A-1, Cisco ASR 9010 Router Physical Specifications • Table A-2, Cisco ASR 9006 Router Physical Specifications •...

  • Page 156: Table

    230 pounds (104.33 kg) • using all card slots and three power modules 1. Chassis only does not include cards, power modules, fan trays, filter or chassis accessories. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide OL-17501-09...

  • Page 157: Table

    Chassis: fully configured using all card slots 1038 pounds (470.28 kg) • and four power trays 1. Chassis only does not include any cards, power modules, fan trays, or chassis accessories. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide OL-17501-09...

  • Page 158: Table

    1. Chassis only does not include any cards, power modules, fan trays, or chassis accessories. Table A-6 lists the environmental specifications for the Cisco ASR 9000 Series Routers. Table A-6 Cisco ASR 9000 Series Environmental Specifications...
  • Page 159 Ethernet line cards using GLC-GE-100FX SFP transceiver modules are installed in the router. This is due to the lower temperature specifications of the SFP module. Please contact a Cisco representative for more information. 2. Short term operating temperature specifications for the router will differ from those listed in this table when the 16-port 10-Gigabit Ethernet line card is installed in the router because of the lower temperature specifications of the SFP+ modules that are used in this line card.

  • Page 160: Cisco Asr 9006 Router Ac Electrical Specifications

    1. For each AC power supply module. Some power/chassis configurations may operate at lower current ratings than those specified in this table. Contact your Cisco technical representative for more information. Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide...

  • Page 161: Table

    1. For each AC power supply module. Some power/chassis configurations may operate at lower current ratings than those specified in this table. Contact your Cisco technical representative for more information. Note Both the AC-powered and DC-powered versions of the Cisco ASR 9904 Router support only version 2 power systems.

  • Page 162: Table

    1. For each AC power supply module. Some power/chassis configurations may operate at lower current ratings than those specified in this table. Contact your Cisco technical representative for more information. Both the AC-powered and DC-powered versions of the Cisco ASR 9922 Router support only Note version 2 power systems.

  • Page 163: Cisco Asr 9010 Router Dc Electrical Specifications

    2). 1. For each DC power supply module. Some power/chassis configurations may operate at lower current ratings than those specified in this table. Contact your Cisco technical representative for more information. Table A-13 lists the DC electrical specifications for the Cisco ASR 9006 Router.

  • Page 164: Table

    (version 1 and version 2). 1. For each DC power supply module. Some power/chassis configurations may operate at lower current ratings than those specified in this table. Contact your Cisco technical representative for more information. Table A-14 lists the DC electrical specifications for the Cisco ASR 9904 Router.

  • Page 165: Table

    1. For each DC power supply module. Some power/chassis configurations may operate at lower current ratings than those specified in this table. Contact your Cisco technical representative for more information. Both the AC-powered and DC-powered versions of the Cisco ASR 9922 Router support only Note version 2 power systems.

  • Page 166: Table

    12,600 W (Cisco ASR 9010 Router only) trays) Maximum (three 2100 W power modules in a single tray) 6300 W (Cisco ASR 9006 Router only) 1. Maximum output power the power system is capable of supporting (not system power consumption).

  • Page 167: Table

    Sync ports (0, 1) Can be configured as one of the following: BITS (Building Integrated Timing System) port • • J.211 or UTI (Universal Timing Interface) port Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide A-13 OL-17501-09...

  • Page 168: Table

    4-Port 10-Gigabit Ethernet Line Card ° ° Power consumption 310 W at 77 F (25 ° ° 320 W at 104 F (40 ° ° 350 W at 131 F (55 Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide A-14 OL-17501-09...
  • Page 169 80-Gigabyte Modular Line Card ° ° Power consumption 350 W at 77 F (25 ° ° 400 W at 104 F (40 ° ° 420 W at 131 F (55 Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide A-15 OL-17501-09...
  • Page 170 Fan Tray (ASR 9912) ° ° Power consumption 290 W at 77 F (25 ° ° 900 W at 104 F (40 ° ° 1800 W at 131 F (55 Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide A-16 OL-17501-09...

Table of Contents