Table of Contents
Advertisement
Enjoying through External Equipment
5
Select the desired server (
• The screen changes to "Media Navigator" on the selected
server.
Note
• The Home Media Gallery can memorize previously connected
servers. When the Media Navigator is launched, available
servers are automatically searched and connected. To switch
between connected servers, choose server to another one,
select "Select Server" from the Tool Menu.
• If a previously connected server can not be found or if the server
is in the sleep mode, the server name is dimmed (grayed out).
• In some cases, you may be able to start a media server if it
supports "Wake On LAN". Select the server and press ENTER
to transmit a "Wake On LAN" command to the selected server.
• You cannot select a server unless that media server has been
set up.
Resetting to default
You can reset the setups you have entered within the Home
Media Gallery function to default (See "Default Settings" on page
83).
1
Press HOME MEDIA GALLERY.
• The Home Media Gallery screen is displayed.
2
Select "Setup" (
/
then ENTER).
3
Select "Default Settings" (
4
Select "Reset" (
/
then ENTER).
• A restart dialog screen appears.
5
Press ENTER on the dialog screen.
• The setup finishes.
• The system restarts then the Home Media Gallery screen
returns.
Other convenient features
Screen saver
During navigation, the screen saver launches automatically
if no activity is sensed within five minutes.
• No screen saver is available while a movie or slideshow is
played.
• Pressing any key cancels screen saver. When canceled
with a USB device being connected, connecting operation
resumes.
Note
• Pressing INFO to display the Player status or key guide
before screen saver is activated may cause image retention
to appear.
• Do not display the Player status and key guide for an
extended period of time while playing a movie or
slideshow.
Software Update
Software update is available on the Pioneer website (http://
www.pioneerelectronics.com). Make sure that you have a
USB flash drive. First download the software according to the
guidelines on the website and perform the following to update
the software.
/
then ENTER).
/
then ENTER).
Downloading the software for update
Perform the following procedure to download the software onto
your computer and copy it onto a USB flash drive.
1
Download the software.
2
Extract the downloaded file.
• The file extracts to a folder named "updater".
3
Plug a USB flash drive into your PC and copy the
extracted folder onto it.
• All the files and subfolders inside "updater" are copied into
the root directory of your USB flash drive.
Note
• If you change any of the names of the files or folders, updating
may not work properly.
• A ZIP compressed file cannot be used to update your software.
Make sure to decompress the file before copying it to the USB
flash drive. Software to decompress ZIP files is not supplied
with the plasma display. The software is available on the
Internet.
Confirming the existing Home Media Gallery version
Be sure to check the version of the software you are using before
updating the software. You can check it with the following
procedure.
1
Press HOME MEDIA GALLERY.
• The Home Media Gallery screen is displayed.
2
Select "Setup" (
/
then ENTER).
3
Select "Home Media Gallery Version" (
ENTER).
• Jot down the Home Media Gallery Version displayed in the
screen.
Ex.) software Version: 1.0.xxx
4
Select "OK" to return to the previous screen (ENTER).
Updating the software
Then perform the following procedure to update the software. Do
not turn the system off until the procedure is complete.
1
Press HOME MEDIA GALLERY.
• The Home Media Gallery screen is displayed.
2
Select "Setup" (
/
then ENTER).
3
Select "Software Update" (
• A "Software Update" submenu appears.
4
Remove the USB flash drive from your PC and plug it
into the plasma display.
5
Select "Next" (
/
then ENTER).
• The next screen appears. Complete the procedure
following the guidelines on the screen.
6
Press ENTER after the following steps are complete:
"Download", "Write" and "Verify"
• A restart dialog screen appears.
7
Press ENTER after reading a notice on the screen.
• The system is restarted then the Home Media Gallery
screen returns.
• Software update finishes.
• You can remove the USB flash drive from the plasma
display.
/
then
/
then ENTER).
12
85
En
Hide quick links:
Advertisement
Table of Contents
