Table of Contents
Advertisement
Adjustments and Settings
Image position adjustment (AV source only)
Adjusts the horizontal and vertical positions of images on the
plasma display.
1
Press HOME MENU.
2
Select "Option" ( /
then ENTER).
3
Select "Position" ( /
4
Select "H/V Position Adjust" ( /
Position
H/V Position Adjust
Reset
5
Adjust the vertical position ( / ) or horizontal position
( / ).
6
Press HOME MENU to exit the menu.
Note
• To restore the factory defaults for all the items, press
select "Reset" in step 4, and then press ENTER. A confirmation
screen appears. Press
/
ENTER.
• Adjustments are stored separately for each input source.
• Depending on the displayed video, the image position may not
change even after adjustment.
Automatic image position and clock
adjustments (PC source only)
Use Auto Setup to automatically adjust positions and clock of
images coming from a personal computer.
1
Press HOME MENU.
2
Select "Option" ( /
then ENTER).
3
Select "Auto Setup" ( /
Option
Auto Setup
Manual Setup
• Auto Setup starts.
4
Press HOME MENU to exit the menu.
Note
• When Auto Setup is finished, "Auto Setup completed."
appears.
• Even when "Auto Setup completed." appears, Auto Setup may
have failed, depending on conditions.
• Auto Setup may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the PC
image and try again.
• Be sure to connect the computer to the plasma display and
switch it on before starting Auto Setup.
• Depending on the displayed video, the image position may not
change even after adjustment.
• This function is not selectable when the PC is connected to the
HDMI terminal.
then ENTER).
then ENTER).
/
to select "Yes", and then press
then ENTER).
Manual image position and clock
adjustments (PC source only)
Usually you can easily adjust the positions and clock of images
using Auto Setup. Use Manual Setup to optimize the positions
and clock of images when necessary.
1
Press HOME MENU.
2
Select "Option" ( /
3
Select "Manual Setup" ( /
4
Select an item to be adjusted ( /
Manual Setup
H/V Position Adjust
Clock
Phase
Reset
5
Perform adjustment ( /
• With "Clock" or "Phase" selected, you can change the
to
parameter using
6
Press HOME MENU to exit the menu.
Note
• To restore the factory defaults for all the items, press
select "Reset" in step 4, and then press ENTER. A confirmation
screen appears. Press
ENTER.
• This function is not selectable when the PC is connected to the
HDMI terminal.
Reducing video noise
For the individual analog TV channels, you can specify whether
the plasma display should reduce video noise depending on the
levels of broadcasting signals.
1
Press HOME MENU.
2
Select "Option" ( /
3
Select "Tuner NR Setting" ( /
4
Select "Channel Map" ( / ).
You can select only analog channels set by the Auto Channel
Preset or POD.
5
Select "Tuner NR" ( / ).
6
Select "On" ( / ).
HTuner NR Setting ANT.A
Channel Map
Tuner NR
Channel Keep/Skip
Item
Description
On (default)
Activates Tuner NR
Off
Deactivates Tuner NR
then ENTER).
then ENTER).
then ENTER).
0
0
or
/ ).
/ .
/
to select "Yes", and then press
then ENTER).
then ENTER).
7
On
Keep
11
/
to
61
En
Hide quick links:
Advertisement
Table of Contents
