Table of Contents
Advertisement
Tuner Setup
09
Chapter 9
Tuner Setup
Setting up TV channels
This section describes how to search and set up TV channels that
you can watch under the current conditions. Unless you set up
TV channels using Auto Channel Preset, you may not be able to
tune in those channels.
Using Auto Channel Preset
Auto Channel Preset automatically searches and sets up TV
channels.
1
Press HOME MENU.
2
Select "Tuner Setup" ( /
3
Select "Channel Setup" ( /
4
Select "Ant. A" or "Ant. B" ( /
5
Select "Auto Channel Preset" ( /
6
Select "Air" or "Cable" ( /
Channel Setup
Ant. A
Ant. A
Auto Channel Preset
Enter
Begin Preset
• Channel search automatically starts.
Channel Setup
Ant. A
Ant. A
Auto Channel Preset
• To quit Auto Channel Preset halfway, press D.
7
After Auto Channel Preset has been finished, press
HOME MENU to exit the menu.
Note
• When using the Cable Converter, you may need to manually
add Cable Converter output channels.
• When an inserted CableCARD™ is functioning, you can
execute Auto Channel Preset by selecting "Ant.B" in step 4.
Setting for skipping unwanted channels
From among TV channels searched and set up using Auto
Channel Preset, you can select channels to be skipped when
CH+/- are operated.
1
Press HOME MENU.
2
Select "Tuner Setup" ( /
3
Select "Channel Setup" ( /
4
Select "Ant. A" or "Ant. B" ( /
5
Select "Channel Keep/Skip" ( /
36
En
then ENTER).
then ENTER).
then ENTER).
then ENTER).
then ENTER).
Auto Ch. Preset
Cable
xxxxxxxxxxxxxxxxxxxxx
Air
2.0
xxxxxxxxxxxxxxxxxxxxx
Cable
xxxxxxxxxxxxxxxxxxxxx
4.0
6.0
Cancel
Home Menu
D
Auto Ch. Preset
Cable
xxxxxxxxxxxxxxxx
One Moment Please ...
• Cable
xxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxx
Cancel
Home Menu
D
then ENTER).
then ENTER).
then ENTER).
then ENTER).
6
Select a channel to be skipped ( /
Channel Setup Ant. A
Ant. A
• For the skipped channel, a check mark disappears.
7
Press HOME MENU to exit the menu.
Note
• To restore skipped channels, use the above procedure except
that you select a skipped channel in step 6.
• When using the Cable Converter, you may need to manually
add Cable Converter output channels.
Setting up TV channels manually
This section describes how to manually set up TV channels that
have not been set up by Auto Channel Preset.
1
Press HOME MENU.
2
Select "Tuner Setup" ( /
3
Select "Channel Setup" ( /
Exit
4
Select "Ant. A" or "Ant. B" ( /
5
Select "Add Channel" ( /
6
Select a channel number to be added ( /
• You can also use buttons 0 to 9 to enter a channel number.
Exit
Channel Setup Ant. A
Ant. A
• After ENTER has been pressed, a confirmation screen
appears.
7
Press A to complete the setup process.
8
Press HOME MENU to exit the menu.
Note
• Adding channels manually is for adding analog channels only.
Digital channels cannot be added.
Checking signal strength
When you have selected antenna A, you can check the current
channel's signal strength. You may use this function when
receiving a channel through a VHF/UHF antenna.
1
Press HOME MENU.
2
Select "Tuner Setup" ( /
3
Select "Channel Setup" ( /
4
Select "Ant. A" ( /
then ENTER).
Channel Keep/Skip
Channel Keep/Skip
2.0
4.0
6.0
then ENTER).
then ENTER).
then ENTER).
then ENTER).
Add Channel
Add Channel
000
1
then ENTER).
then ENTER).
then ENTER).
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Home Menu
Exit
then ENTER).
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Home Menu
Exit
Hide quick links:
Advertisement
Table of Contents
