Shipping Box Contents - Cisco Catalyst 9300 Series Hardware Installation Manual

Hide thumbs Also See for Catalyst 9300 Series:

Table of Contents

Shipping Box Contents

• Temperature around the unit does not exceed 113°F (45°C). If the switch is installed in a closed or

• Humidity around the switch does not exceed 95 percent.

• Altitude at the installation site is not greater than 10,000 feet.

• Cooling mechanisms, such as fans and blowers in the switch, can draw dust and other particles causing

Shipping Box Contents

The shipping box contains the model of the switch you ordered and other components needed for installation.

Some components are optional, depending on your order.

Note

Verify that you have received these items. If any item is missing or damaged, contact your Cisco

representative or reseller for instructions. Verify that you have received these items. If any item is missing

or damaged, contact your Cisco representative or reseller for instructions.

Figure 8: Components delivered in the shipping box

Cisco Catalyst 9300 Series Switches Hardware Installation Guide

multirack assembly, the temperature around it might be greater than normal room temperature.

contaminant buildup inside the chassis, which can result in system malfunction. You must install this

equipment in an environment as free from dust and foreign conductive material (such as metal flakes

from construction activities) as is possible.

Cisco Catalyst 9300 Series switch with

optional network module

(power supply and fan modules not

shown)

AC power cord

Product documentation and compliance

document

Footnote.

Switch Installation

Eight number-8 Phillips flat-head screws

Cable guide

M4.0 x 20mm Phillips pan-head screw

Table of Contents

Show Quick Links

Table of Contents