Cisco Catalyst 9300 Series Hardware Installation Manual page 47
Hide thumbs
Also See for Catalyst 9300 Series:
- Hardware installation manual (140 pages) ,
- Installing (22 pages) ,
- Manual (15 pages)
Table of Contents
Advertisement
Switch Installation
Procedure
Step 1
Remove the dust covers from the StackWise cables and StackWise ports, and store them for future use.
Step 2
Connect the cable to the StackWise port on the switch rear panel. Align the connector and connect the StackWise
cable to the StackWise port on the switch rear panel and finger-tighten the screws (clockwise direction). Make
sure the Cisco logo is on the top side of the connector as shown in the figure.
Step 3
Connect the other end of the cable to the port on the other switch and finger-tighten the screws. Avoid
overtightening the screws.
Figure 23: Connecting the StackWise Cable in a StackWise Port
1
Cisco logo
2
Connector screw
3
Connector screw
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
Connecting to the StackWise Ports
35
- Quick Links:
- Leds
- Beacon Led
Hide quick links:
Advertisement
Table of Contents
