Smart Zoning Member Configuration; Enabling Smart Zoning On A Vsan; Setting Default Value For Smart Zoning - Cisco Nexus 5000 Series Configuration Manual
Nx-os san
Hide thumbs
Also See for Nexus 5000 Series:
- Cli configuration manual (660 pages) ,
- Configuration manual (324 pages) ,
- Command reference manual (196 pages)
Table of Contents
Advertisement
Smart Zoning Member Configuration
Smart Zoning Member Configuration
The following table displays the supported smart zoning member configurations.
Feature
PWWN
FCID
FC Alias
Device-alias
Interface
IP Address
Symbolic nodename
FWNN
Domain ID
Enabling Smart Zoning on a VSAN
To enable smart zoning for a VSAN, perform these tasks:
SUMMARY STEPS
1. switch# configure terminal
2. switch(config)# system default zone smart-zone enable
DETAILED STEPS
Command or Action
Step 1
switch# configure terminal
Step 2
switch(config)# system default zone smart-zone
enable
Setting Default Value for Smart Zoning
To set the default value, perform these tasks:
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
152
Supported
Yes
Yes
Yes
Yes
No
No
No
No
No
Purpose
Enters global configuration mode.
Enables smart zoning on a VSAN that are created based on
the specified default value.
Configuring and Managing Zones
OL-27583-01
Advertisement
Table of Contents
