Enabling Or Disabling Smart Call Home; Testing The Smart Call Home Configuration - Cisco Nexus 3548 Configuration Manual
Nx-os system management
Hide thumbs
Also See for Nexus 3548:
- Command reference manual (556 pages) ,
- Configuration manual (230 pages) ,
- Installation manual (112 pages)
Table of Contents
Advertisement
Enabling or Disabling Smart Call Home
What to Do Next
Enable Smart Call Home.
Enabling or Disabling Smart Call Home
Procedure
Step 1
Step 2
Step 3
Step 4
The following example shows how to enable Smart Call Home:
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)# enable
switch(config-callhome)#
What to Do Next
Optionally, generate a test message.
Testing the Smart Call Home Configuration
Before You Begin
Verify that the message level for the destination profile is set to 2 or lower.
Important
Procedure
Step 1
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 6.x
102
Command or Action
switch# configure terminal
switch(config)# callhome
switch(config-callhome) # [no] enable
switch(config)# copy running-config
startup-config
Smart Call Home testing fails when the message level for the destination profile is set to 3 or higher.
Command or Action
switch# configure terminal
Configuring Smart Call Home
Purpose
Enters global configuration mode.
Enters Smart Call Home configuration mode.
Enables or disables Smart Call Home.
Smart Call Home is disabled by default.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
Purpose
Enters global configuration mode.
- Quick Links:
- System Management Features
Hide quick links:
Advertisement
Table of Contents
