Guidelines And Limitations For Warp Span - Cisco Nexus 3548 Configuration Manual
Nx-os system management
Hide thumbs
Also See for Nexus 3548:
- Command reference manual (556 pages) ,
- Configuration manual (230 pages) ,
- Installation manual (112 pages)
Table of Contents
Advertisement
Guidelines and Limitations for Warp Span
Table 29: Warp SPAN Groups
Group
1
2
3
4
5
6
7
8
9
10
11
12
1
Port 36 is the dedicated source port.
Guidelines and Limitations for Warp Span
Warp SPAN has the following configuration guidelines and limitations:
• Source and destination Warp SPAN ports must all be 10G.
• The source port is not configurable and is fixed as Ethernet port 1/36.
• You can create a maximum of 12 groups with a total of 47 destination ports. All of the groups have four
• All four ports in a group must be configured with the switchport monitor command before they can
• Warp SPAN does not allow the destination group to be configured unless all of the ports are
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 6.x
156
ports, except for group 9, which has only three ports and excludes port 1/36 (the fixed source port).
be grouped in a SPAN destination group.
administratively up. After the group has been configured, you can bring up or down any of the ports in
the SPAN destination group. If you copy a working warp configuration that has one or more ports in
the administratively down state and paste that configuration back in the configuration file of the same
switch, Warp SPAN logs the following error:
ERROR: Cannot configure group with member interfaces in admin DOWN state
Destination Ports
1-4
5-8
9-12
13-16
17-20
21-24
25-28
29-32
33-35
1
37-40
41-44
45-48
Configuring Warp SPAN
- Quick Links:
- System Management Features
Hide quick links:
Advertisement
Table of Contents
