Setting The Interface Administrative State; Configuring Interface Modes - Cisco Nexus 5000 Series Configuration Manual
Nx-os san
Hide thumbs
Also See for Nexus 5000 Series:
- Cli configuration manual (660 pages) ,
- Configuration manual (324 pages) ,
- Command reference manual (196 pages)
Table of Contents
Advertisement
Configuring Fibre Channel Interfaces
DETAILED STEPS
Command or Action
Step 1
switch# configuration terminal
Step 2
switch(config)# interface { fc slot/port - port [ , fc slot/port
- port ] | vfc vfc-id - vfc-id [ , vfc vfc-id - vfc-id ] }
Setting the Interface Administrative State
To gracefully shut down an interface, perform this task:
To enable traffic flow, perform this task:
SUMMARY STEPS
1. switch# configuration terminal
2. switch(config)# interface {fc slot/port}|{vfc vfc-id}
3. switch(config-if)# shutdown
DETAILED STEPS
Command or Action
Step 1
switch# configuration terminal
Step 2
switch(config)# interface {fc slot/port}|{vfc
vfc-id}
Step 3
switch(config-if)# shutdown
Configuring Interface Modes
SUMMARY STEPS
1. configure terminal
2. switch(config) # interface vfc vfc-id}
3. switch(config-if) # switchport mode {E|NP}
OL-27583-01
Purpose
Enters configuration mode.
Selects a Fibre Channel interface and enters interface
configuration mode.
Gracefully shuts down the interface and administratively
disables traffic flow (default).
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
Configuring Fibre Channel Interfaces
Purpose
Enters configuration mode.
Selects the range of Fibre Channel interfaces and
enters interface configuration mode.
17
Advertisement
Table of Contents
