Table of Contents
Advertisement
Mounting the Cisco NCS 2002 Shelf
Remove the door from the NCS 2002 shelf and reinstall it after installing all the other modules.
Note
Procedure
Step 1
Complete the necessary task as applicable:
•
•
Step 2
Complete the necessary mounting task as applicable:
•
•
•
Step 3
Connect the chassis to the office ground. For detailed instructions on how to ground the chassis, refer to the
Step 4
Continue with
DLP-L42 Mounting the NCS 2002 Shelf on a Rack (One Person)
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
NTP-L44 Mounting the Brackets in ANSI Configuration, on page 45
NTP-L45 Mounting the Brackets in ETSI Configuration, on page 51
DLP-L43 Mounting the NCS 2002 Shelf on the Wall, on page 69
NTP-L30 Opening and Removing the Standard Door of the NCS 2002 Shelf, on page
DLP-L42 Mounting the NCS 2002 Shelf on a Rack (One Person)
Series.
This task allows one person to mount the shelf on a
rack.
• # 2 Phillips Dynamometric screwdriver
• ANSI -Two #12-24 x ¾ pan-head Phillips
mounting screws
• ETSI-Two M6 x 20 mounting screws
None
As needed
Onsite
None
Cisco NCS 2000 Series Hardware Installation Guide
111.
67
- Quick Links:
- Cisco Ncs 2006 Shelf
- Ncs 2006
Hide quick links:
Advertisement
Chapters
Table of Contents
