Table of Contents
Advertisement
System Power
The NCS2006-AC supports the same specifications as the 15454-M6-AC2.
Note
DC Power Specifications
The following table lists power specifications of the DC power modules for the NCS 2006 shelf.
Table 25: NCS 2006 DC Power Specifications
DC Power
Rating
Module
NCS 2006-DC
30 Amp
NCS2006-DC20
20 Amp
NCS2006-DC40
40 Amp
When the NCS 2006 shelf is powered at –60 VDC (nominal), only these cards can be installed: TNC,
Note
OPT-AMP-C, OPT-AMP-17-C, OPT-EDFA-17, OPT-EDFA-24, 17 SMR9 FS, 24 SMR9 FS, 34 SMR9
FS, SMR20 FS, SMR20 FS CV, 12-AD-FS, 16-AD-FS, 100GS-CK-LC, and MR-MXP cards, and the
NCS2006-ECU-60 card.
• When you use the 60V DC power module for NCS 2006, you must go to CTC (shelf-view) Provisioning
• NCS2006-DC, NCS2006-DC20, and NCS 2006-DC40 shelf power consumption (configuration
Cisco NCS 2000 Series Hardware Installation Guide
470
Nominal Voltage
–48 VDC
–60 VDC
–48 VDC
–60 VDC
-48 VDC
-60 VDC
> General > Power Monitor and set the following threshold values:
◦ ELWBATVG (Extreme Low Battery Voltage)=-50 Vdc
◦ LWBATVG (Low Battery Voltage)=-50 Vdc
◦ HIBATVG (High Battery Voltage)=-72 Vdc
◦ EHIBATVG (Extreme High Battery Voltage)=-72 Vdc
dependent):
◦ 130 W with NCS2006-FTA Fan Tray, LCD, and ECU module
Current
External Fuse
Rating
30 Amp
40 Amp
24 Amp
20 Amp
30 Amp
16 Amp
40 Amp
60 Amp
32 Amp
Hardware Specifications
Input Voltage
Maximum Load
Range
–40.5 to –57.6
1440 W
VDC
–50 to –72 VDC
–40.5 to –57.6
960 W
VDC
–50 to –72 VDC
–40.5 to –57.6
1920 W
VDC
–50 to –72 VDC
- Quick Links:
- Cisco Ncs 2006 Shelf
- Ncs 2006
Hide quick links:
Advertisement
Chapters
Table of Contents
