5-Port Gigabit Ethernet Spa Cables And Connectors; Sfp Module Connections - Cisco ASR 14000 Series Hardware Installation Manual
Router plim, sip and spa
Hide thumbs
Also See for ASR 14000 Series:
- Installation manual (132 pages) ,
- Command reference manual (376 pages) ,
- Management command reference (782 pages)
Table of Contents
Advertisement
5-Port Gigabit Ethernet SPA Overview
Table 3-13
LED Label
STATUS
5-Port Gigabit Ethernet SPA Cables and Connectors
The 5-Port Gigabit Ethernet SPA has five electrical connectors that support SFP modules. Each port can
send and receive traffic using cabling appropriate for the SFP module inserted.
SFP Module Connections
The small form-factor pluggable (SFP) module is an input/output (I/O) device that plugs into the Gigabit
Ethernet ports on the 5-Port Gigabit Ethernet SPA, linking the port with a fiber-optic network.
The 5-Port Gigabit Ethernet SPA accepts only the SFP modules listed as supported in this document. An
Note
SFP module check is run every time an SFP module is inserted into the 5-Port Gigabit Ethernet SPA, and
only SFP modules that pass this check can be used by the 5-Port Gigabit Ethernet SPA.
SFP modules exist for technologies other than Gigabit Ethernet and for products other than the 5-Port
Gigabit Ethernet SPA. However, the information in this document pertains only to SFP modules that plug
into the 5-Port Gigabit Ethernet SPA ports.
The SFP module has a receiver port (RX) and a transmitter port (TX) that compose one optical interface.
Table 3-14
Table 3-14
SFP Module
Product Number
SFP-GE-S
SFP-GE-L
SFP-GE-Z
Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide
3-22
5-Port Gigabit Ethernet SPA LEDs (continued)
Color
State
Amber
On
Off
Off
Green
On
Amber
On
and
Table 3-15
provide SFP module information and specifications.
SFP Module Options
SFP Module
Short wavelength
(1000BASE-SX)
Long wavelength/long haul
(1000BASE-LX/LH)
Extended wavelength
(1000BASE-ZX)
Chapter 3
Overview: Cisco ASR 14000 Series Router Shared Port Adapters
Meaning
Port is enabled and the link is down.
SPA power is off.
SPA is ready and operational.
SPA power is on and good, and the SPA is being configured.
Description
Contains a Class 1 laser of 850 nm for
1000BASE-SX (short-wavelength) applications.
Contains a Class 1 laser of 1310 nm for
1000BASE-LX/LH (long-wavelength)
applications.
Contains a Class 1 laser of 1550 nm for
1000BASE-ZX (extended-wavelength)
applications.
OL-17456-01
Advertisement
Table of Contents
Troubleshooting
