hit counter script
Cisco ASR 14000 Series Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. ASR 14000 Series
  6. Hardware installation manual
Cisco ASR 14000 Series Hardware Installation Manual

Cisco ASR 14000 Series Hardware Installation Manual

Router plim, sip and spa
Hide thumbs Also See for ASR 14000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
Cisco ASR 14000 Series Router PLIM, SIP ,
and SPA Hardware Installation Guide
Cisco IOS XR Software Release 3.7.1
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-17456-01

Advertisement

Table of Contents
loading

Related Manuals for Cisco ASR 14000 Series

Summary of Contents for Cisco ASR 14000 Series

  • Page 1 Cisco ASR 14000 Series Router PLIM, SIP , and SPA Hardware Installation Guide Cisco IOS XR Software Release 3.7.1 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
  • Page 2 You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: •...

  • Page 3: Table Of Contents

    Physical Layer Interface Modules SPA Interface Processors Shared Port Adapters SIP and SPA Compatibility Modular Optics Compatibility Overview: Cisco ASR 14000 Series Router Physical Layer Interface Module and SPA Interface C H A P T E R Processor PLIM Summary SIP Summary...
  • Page 4 5-Port Gigabit Ethernet SPA Overview 3-21 5-Port Gigabit Ethernet SPA LEDs 3-22 5-Port Gigabit Ethernet SPA Cables and Connectors 3-22 SFP Module Connections 3-22 SFP Module Cabling and Connection Equipment 3-24 Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...
  • Page 5 C H A P T E R Handling SPAs SPA Installation and Removal Installing a SPA in a SIP Removing a SPA from a SIP Online Insertion and Removal Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...
  • Page 6 C H A P T E R Troubleshooting the SIP Troubleshooting the SPA Using debug Commands Packing a SIP for Shipment Packing a SPA for Shipment N D E X Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 7: Objectives

    This document describes the physical layer interface modules (PLIMs), SPA interface processor (SIPs), and shared port adapters (SPAs) that are supported on the Cisco ASR 14000 Series Router. This document also describes how to install the supported PLIMs, SIPs, and SPAs and how to troubleshoot the installation.

  • Page 8: Organization

    (8-slot or 4-slot). Hardware Documents • Cisco ASR 14000 Series Router 4-Slot Line Card Chassis Site Planning Guide Cisco ASR 14000 Series Router 8-Slot Line Card Chassis Site Planning Guide • Cisco ASR 14000 Series Router 4-Slot Line Card Chassis System Description •...

  • Page 9: Software Documents

    Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html...
  • Page 10 Preface Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 11: Chapter 1 Plim, Sip, And Spa Product Overview

    • Modular Optics Compatibility, page 1-3 • For information on specific Cisco ASR 14000 Series Router software commands, refer to Cisco ASR 14000 Series Router Interface and Hardware Component Command Reference. Introduction to PLIMs, SIPs, and SPAs PLIMs, SIPs, and SPAs comprise a carrier card and port adapter architecture that increases modularity, flexibility, and density across Cisco Systems routers for network connectivity.

  • Page 12: Shared Port Adapters

    SIP. SIPs also support OIR. SIP and SPA Compatibility Table 1-1 shows the SIP that is supported in the Cisco ASR 14000 Series Router and the SPAs that it supports. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide...

  • Page 13: Modular Optics Compatibility

    SFP or XFP module is inserted into a SPA, and only those modules that pass this check are usable. Table 1-2 shows the types of optics modules that have been qualified for use with the SPAs supported on the Cisco ASR 14000 Series Router, and the first software release that supports these optics: Table 1-2 SPA Optics Compatibility...
  • Page 14 10-Port Gigabit Ethernet SPA SFP-GE-S Release 3.7.1 • SFP-GE-L • SFP-GE-Z • SFP-GE-T • 1-Port 10-Gigabit Ethernet SPA XFP-10GLR-OC192SR Release 3.7.1 • XFP-10GER-OC192IR • • XFP-10GZR-OC192LR2 Release 3.7.1 Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 15: Plim Summary

    Physical Layer Interface Module and SPA Interface Processor This chapter describes the physical layer interface module (PLIM) and SPA interface processor (SIP) that are supported on the Cisco ASR 14000 Series Router and contains the following sections: PLIM Summary, page 2-1 •...

  • Page 16: Sip Summary

    XENPAK pluggable optics. Dense Wavelength Division Multiplexing (DWDM) is supported with the proper XENPAK, enabling the Cisco ASR 14000 Series Router to be directly connected into an optical filter module, such as the Cisco ONS 15454 Reconfigurable Optical Add-drop Multiplexer (ROADM).

  • Page 17: Physical Specifications

    Chapter 2 Overview: Cisco ASR 14000 Series Router Physical Layer Interface Module and SPA Interface Processor Cisco ASR 14000 PLIM Overview Figure 2-1 Cisco ASR14K-4X10GE PLIM Faceplate ASR14K-4X10GE 10GBASE-LR 10GBASE-LR 10GBASE-LR 10GBASE-LR STATUS LED Table 2-3 describes the Cisco ASR14K-4X10GE PLIM LED.

  • Page 18: Cisco Asr 14000 Series 42-Port Gigabit Ethernet Interface Module

    The following sections describe the Cisco ASR14K-42XGE PLIM: LEDs, page 2-4 • Physical Specifications, page 2-4 • LEDs The Cisco ASR14K-42XGE PLIM has six module STATUS LEDs and 42 port LEDs, as shown in Figure 2-2. Figure 2-2 Cisco ASR14K-42XGE PLIM Faceplate ASR14K-42XGE...

  • Page 19: Physical Specifications

    20 ports of IEEE 802.3-compliant Gigabit Ethernet interfaces and two available Cisco I-Flex shared port adapter (SPA) slots. By providing service intelligence, modularity, and configuration flexibility with fully compatible SPAs, the Cisco I-Flex design offers carriers long-term savings and the ability to handle evolving service delivery requirements, such as SONET-to-Ethernet.

  • Page 20: Physical Specifications

    Chapter 2 Overview: Cisco ASR 14000 Series Router Physical Layer Interface Module and SPA Interface Processor Identifying Slots and Subslots for PLIM, SIP, and SPA Figure 2-3 Cisco ASR14K-20XGE-FL SIP Faceplate SPA-DC192POS-XFP FF12 CLEAN CONNECTOR WITH ALCOHOL WIPES BEFORE CONNECTING...

  • Page 21: Plim Or Sip Slot Locations On The Cisco Asr 14000 Series Router

    PLIM or SIP Slot Locations on the Cisco ASR 14000 Series Router A PLIM or SIP can be installed in PLIM slots 0 through 7 on the Cisco ASR 14000 Series Router 8-slot line card chassis and PLIM slots 0 through 3 on the Cisco ASR 14000 Series Router 4-slot line card chassis.

  • Page 22: Spa Slot Numbering On The Cisco Asr14K-20Xge-Fl Sip

    Figure 2-6 shows a Cisco ASR14K-20XGE-FL SIP with two SPAs installed in subslots 1 and 4. The Cisco ASR14K-20XGE-FL SIP can pass a maximum of 10 Gbps of traffic in one bay for each PLIM Note ASIC. See the “Bandwidth Oversubscription” section on page 3-2 for more information.

  • Page 23: Spa Interface Addresses On Sip

    SPA 4 SPA Interface Addresses on SIP SPAs in the Cisco ASR 14000 Series Router running Cisco IOS XR Software Release 3.7.1 use an addressing format that specifies the physical location of the SIP, SPA, and interface. The interface address format is rack/slot/subslot/port, where: rack—Specifies the rack number, 0 in a single-chassis system.
  • Page 24 Chapter 2 Overview: Cisco ASR 14000 Series Router Physical Layer Interface Module and SPA Interface Processor Identifying Slots and Subslots for PLIM, SIP, and SPA For the 10-Port Gigabit Ethernet SPA—0 through 9 – For the 1-Port 10-Gigabit Ethernet SPA—0 is the only option –...

  • Page 25: Spa Summary

    8-Port OC-12c/STM-4 Multirate POS SPA SPA-8XOC12-POS Release 3.7.1 2-Port OC-48c/STM-16 POS SPA SPA-2XOC48POS/RPR Release 3.7.1 4-Port OC-48c/STM-16 POS SPA SPA-4XOC48POS/RPR Release 3.7.1 1-Port OC-192c/STM-64 POS/RPR XFP SPA SPA-OC192POS-XFP Release 3.7.1 Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 26: Bandwidth Oversubscription

    8 Gbps 10-Port Gigabit Ethernet SPA 1 Gbps 10 Gbps 1-Port 10-Gigabit Ethernet SPA 10 Gbps 10 Gbps 1. Total bandwidth value assumes eight OC-12c/STM-4 optics modules. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 27: 4-Port Oc-3C/Stm-1 Pos Spa Overview

    The 4-Port OC-3c/STM-1 POS SPA has three types of LEDs: two LEDs for each port on the SPA and one STATUS LED. Figure 3-1 shows the 4-Port OC-3c/STM-1 POS SPA. Figure 3-1 4-Port OC-3c/STM-1 POS SPA Faceplate C/A (Carrier/Alarm) LED STATUS LED A/L (Active/Loopback) LED Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 28: 4-Port Oc-3C/Stm-1 Pos Spa Leds

    SONET and SDH single-mode and multimode optical fiber connection (see Figure 3-2). Cisco Systems qualifies the optics that are approved for use with its SPAs. The 4-Port OC-3c/STM-1 POS SPA supports the following types of optical transceiver modules: Multimode (MM) SFP module—SFP-OC3-MM •...
  • Page 29 Long-range SFP optical transceiver modules (for long-reach configurations) cannot be connected back to back without using an attenuator between them. Figure 3-3 LC-Type Cable Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 30: Oc-3 Module Connections

    OC-3 LR-2: –10 dBm Maximum receiver power damage OC-3 MM: +5 dBm OC-3 SR: +5 dBm OC-3 IR-1: +5 dBm OC-3 LR-1: +5 dBm OC-3 LR-2: +5 dBm Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 31: 8-Port Oc-12C/Stm-4 Multirate Pos Spa Overview

    Port is enabled by software, and there is a valid SONET signal without any alarms. Amber Port is enabled by software, and there is at least one alarm. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 32: 8-Port Oc-12C/Stm-4 Multirate Pos Spa Interface Specifications

    SONET and SDH single-mode and multimode optical fiber connections (see Figure 3-5). Cisco Systems qualifies the optics that are approved for use with its SPAs. The following OC-3 optical transceiver modules are supported on the 8-Port OC-12c/STM-4 Multirate POS SPA: Multimode (MM) SFP module—SFP-OC3-MM •...
  • Page 33 OC-3-equipped or OC-12-equipped routers back-to-back. Long-range SFP optical transceiver modules (for long-reach configurations) cannot be connected back-to-back without using an attenuator between them. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 34: Oc-3 Module Connections

    OC-3 LR-2: –5 to 0 dBm Receiver sensitivity (maximum) OC-3 MM: –30 dBm OC-3 SR: –23 dBm OC-3 IR-1: –28 dBm OC-3 LR-1: –34 dBm OC-3 LR-2: –34 dBm Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-10 OL-17456-01...

  • Page 35: Oc-12 Module Connections

    OC-12 LR-2: –3 to 2 dBm Receiver sensitivity (maximum) OC-12 MM: –26 dB OC-12 SR: –23 dBm OC-12 IR-1: –28 dBm OC-12 LR-1: –28 dBm OC-12 LR-2: –28 dBm Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-11 OL-17456-01...

  • Page 36: 2-Port And 4-Port Oc-48C/Stm-16 Pos Spa Overview

    3-7. Figure 3-7 2-Port OC-48c/STM-16 POS SPA Faceplate SPA-2XOC48-POS/RPR PTH (Pass Through) LED ACT (Active Loopback) LED PRT (Protect) LED STATUS LED CAR (Carrier Alarm) LED Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-12 OL-17456-01...

  • Page 37: 2-Port And 4-Port Oc-48C/Stm-16 Pos Spa Interface Specifications

    2-Port and 4-Port OC-48c/STM-16 POS SPA Cables, Optical Transceiver Modules, and Connectors Use single-mode (for intermediate-reach configurations) optical fiber cable to connect your router to a network or to connect two OC-48-equipped routers back-to-back. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-13 OL-17456-01...

  • Page 38: Oc-48 Module Connections

    OC-48 SR: –3 dBm OC-48 IR-1: 0 dBm OC-48 LR-2: –9 dBm Maximum receiver power damage OC-48 SR: +5 dBm OC-48 IR-1: +5 dBm OC-48 LR-2: +5 dBm Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-14 OL-17456-01...

  • Page 39: 1-Port Oc-192C/Stm-64 Pos/Rpr Xfp Spa Overview

    The 1-Port OC-192c/STM-64 POS/RPR XFP SPA has six LEDs, as shown in Figure 3-9. Figure 3-9 1-Port OC-192c/STM-64 POS/RPR XFP SPA Faceplate SPA-0C192POS-XFP WRAP LED CARRIER LED PASSTHRU LED ACTIVE LED MATESYNC LED STATUS LED Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-15 OL-17456-01...

  • Page 40: 1-Port Oc-192C/Stm-64 Pos/Rpr Xfp Spa Interface Specifications

    RFC 2615, PPP over SONET/SDH • For information on SNMP MIB support, see “Implementing SNMP on Cisco IOS XR Software” in Cisco IOS XR System Management Configuration Guide. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide...

  • Page 41: Port Oc-192C/Stm-64 Pos/Rpr Xfp Spa Optical Transceiver Modules, Connectors, And Cables

    Single-mode very-long reach XFP module—XFP-10GZR-OC192LR • Cisco Systems qualifies the optics that are approved for use with its SPAs. As of Cisco IOS XR Software Release 3.4.0, the above-listed XFPs are the only optical transceiver modules qualified for use. Use a single-mode optical fiber that has a modal-field diameter of 8.7 ±0.5 microns (nominal diameter is approximately 10/125 microns) to connect your router to a network.

  • Page 42: Cables

    Note mode. Support for the RPR feature is dependent on the platform software-release feature content. Verify support for the RPR feature support using SPA datasheets or by contacting your Cisco representative. 1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA Overview The 1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA is a double-height SPA that is installed in a SIP subslot.
  • Page 43 Amber Port is enabled by software, and there is at least one alarm (LOS, LOF, RDI, and so on). Blinking SRP mode mismatch alarm is indicated. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-19 OL-17456-01...

  • Page 44: 1-Port Oc-192C/Stm-64 Pos/Rpr Vsr Optics Spa Interface Specifications

    RFC 1662, PPP in HDLC-like Framing • RFC 2615, PPP over SONET/SDH For information on SNMP MIB support, see “Implementing SNMP on Cisco IOS XR Software” in Cisco IOS XR System Management Configuration Guide. 1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA Fixed Optical Transceiver,...

  • Page 45: 5-Port Gigabit Ethernet Spa Overview

    5-Port Gigabit Ethernet SPA LEDs. Table 3-13 5-Port Gigabit Ethernet SPA LEDs LED Label Color State Meaning Port is not enabled. Green Port is enabled and the link is up. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-21 OL-17456-01...

  • Page 46: 5-Port Gigabit Ethernet Spa Cables And Connectors

    Contains a Class 1 laser of 1310 nm for (1000BASE-LX/LH) 1000BASE-LX/LH (long-wavelength) applications. SFP-GE-Z Extended wavelength Contains a Class 1 laser of 1550 nm for (1000BASE-ZX) 1000BASE-ZX (extended-wavelength) applications. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-22 OL-17456-01...
  • Page 47 Insert a 10-dB inline optical attenuator between the fiber-optic cable plant and the receiving port on • the 1000BASE-ZX module at each end of the link whenever the fiber-optic cable span is less than 15.5 miles (25 km). Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-23 OL-17456-01...

  • Page 48: Sfp Module Cabling And Connection Equipment

    (including connectors and splices) is less than or equal to 21.5 dB. The optical loss measurement must be performed with a 1550-nm light source. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-24 OL-17456-01...

  • Page 49: 8-Port Gigabit Ethernet Spa Overview

    The small form-factor pluggable (SFP) module is an input/output (I/O) device that plugs into the Gigabit Ethernet ports on the 8-Port Gigabit Ethernet SPA, linking the port with a fiber-optic network. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-25...
  • Page 50 The 1000BASE-SX (short-wavelength) module operates on standard multimode fiber-optic link spans of up to 500 m on 50/125um multimode fiber (MMF) and 300 m on 62.5/125um MMF. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-26...

  • Page 51: Sfp Module Cabling And Connection Equipment

    Fiber Type (micron) (MHz/km) Cable Distance SFP-GE-S 62.5 722 ft (220 m) 62.5 984 ft (300 m) 50.0 1640 ft (500 m) 50.0 1804 ft (550 m) Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-27 OL-17456-01...

  • Page 52: 10-Port Gigabit Ethernet Spa Overview

    The following sections describe the 10-Port Gigabit Ethernet SPA: 10-Port Gigabit Ethernet SPA LEDs, page 3-29 • 10-Port Gigabit Ethernet SPA Cables and Connectors, page 3-29 • Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-28 OL-17456-01...

  • Page 53: Sfp Module Connections

    The small form-factor pluggable (SFP) module is an input/output (I/O) device that plugs into the Gigabit Ethernet optical slots on the 10-Port Gigabit Ethernet SPA, linking the port with a 1000BASE-X fiber-optic network. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-29 OL-17456-01...
  • Page 54 The 1000BASE-SX (short-wavelength) module operates on standard multimode fiber-optic link spans of up to 500 m on 50/125um multimode fiber (MMF) and 300 m on 62.5/125um MMF. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-30...

  • Page 55: Sfp Module Cabling And Connection Equipment

    722 ft (220 m) 62.5 984 ft (300 m) 50.0 1640 ft (500 m) 50.0 1804 ft (550 m) SFP-GE-L 1300 9/10 — 6.2 miles (10 km) Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-31 OL-17456-01...

  • Page 56: 1-Port 10-Gigabit Ethernet Spa Overview

    The 1-Port 10-Gigabit Ethernet SPA has two LEDs, an ACTIVE/LINK LED for the port and a STATUS LED, as shown in Figure 3-16. Figure 3-16 1-Port 10-Gigabit Ethernet SPA Faceplate SPA-1X10GE-L-V2 ACTIVE/LINK LED STATUS LED Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-32 OL-17456-01...

  • Page 57: 1-Port 10-Gigabit Ethernet Spa Leds

    Single-mode very-long-reach (ZR) XFP module—XFP-10GER-OC192LR • Cisco Systems qualifies the optics that are approved for use with its SPAs. As of Cisco IOS XR Release 3.4.1, the above-listed small form-factor pluggable (XFPs) are the only optical transceiver modules qualified for use.

  • Page 58: Xfp Connections

    10GZR LR-2: –40 to 185 degrees F (–40 to 85 degrees C) TX power 10GLR SR-1: –8.2 to 0.5 dBm 10GER IR-2: –4.7 to 4 dBm 10GZR LR-2: 0 to 4 dBm Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-34 OL-17456-01...

  • Page 59: Xfp Port Cabling Specifications

    XFP module. Table 3-27 XFP Port Cabling Specifications XFP Module Wavelength Fiber Type XFP-10GLR-OC192SR 1310 nm XFP-10GER-OC192IR 1550 nm XFP-10GZR-OC192LR 1550 nm Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-35 OL-17456-01...
  • Page 60 Chapter 3 Overview: Cisco ASR 14000 Series Router Shared Port Adapters 1-Port 10-Gigabit Ethernet SPA Overview Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 3-36 OL-17456-01...

  • Page 61: Chapter 4 Preparing To Install A Plim, Sip, And Spa

    Review the safety warnings listed in Regulatory Compliance and Safety Information for the Cisco ASR 14000 Series Router before installing, configuring, or troubleshooting any PLIM, SIP, or SPA. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 62: General Guidelines

    (EMI) shielding and connectors are integral components of the carrier. Although the metal carrier helps to protect the board from ESD, use a preventive antistatic strap during handling. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 63: Laser And Led Safety

    Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into Warning beams or view directly with optical instruments. Statement 1051 Class 1 laser product. Statement 1008 Warning Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...
  • Page 64 Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments. Statement 1051 Warning Class 1 LED product. Statement 1027 Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 65: Chapter 5 Installing And Removing A Plim Or A Sip

    C H A P T E R Installing and Removing a PLIM or a SIP This chapter describes how to install or remove PLIM or SIP on the Cisco ASR 14000 Series Router. This chapter contains the following sections: Handling PLIM or SIP, page 5-1 •...
  • Page 66 5-2). The impedance carrier preserves the integrity of the chassis and is required for EMI compliance and proper cooling in the chassis. Figure 5-2 PLIM Impedance Carrier Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 67: Guidelines For Plim Or Sip Installation And Removal

    When you remove a PLIM or SIP, always use the ejector levers to ensure that the connector pins Caution disconnect from the midplane in the sequence expected by the router. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 68: Plim Or Sip Installation And Removal

    Touching only the metal card carrier, slide the PLIM or SIP from the slot and place it directly into an Step 6 antistatic sack or other ESD-preventive container. Insert another SIP, PLIM, or a PLIM impedance carrier into the empty card slot. Step 7 Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 69: Installing A Plim Or Sip

    During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94 Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...
  • Page 70 “SPA Installation and Removal” Step 9 section on page 6-2. Install the interface cables. We recommend that you clean the fiber-optic connections before attaching Step 10 the cables. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...
  • Page 71 Installing and Removing a PLIM or a SIP PLIM or SIP Installation and Removal If this PLIM or SIP is new, configure it for operation. For command syntax, refer to Cisco ASR 14000 Step 11 Series Router Interface and Hardware Component Command Reference.
  • Page 72 Chapter 5 Installing and Removing a PLIM or a SIP PLIM or SIP Installation and Removal Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 73: Handling Spas

    C H A P T E R Installing and Removing a SPA This chapter describes how to install or remove SPAs on the Cisco ASR 14000 Series Router. This chapter contains the following sections: Handling SPAs, page 6-1 • SPA Installation and Removal, page 6-2 •...

  • Page 74: Spa Installation And Removal

    Figure 6-2 Figure 6-3 illustrate how to install and remove a SPA in a Cisco ASR14K-20XGE-FL SIP when the SIP is not installed in the Cisco ASR 14000 Series Router. Figure 6-2 Installing and Removing a SPA—Horizontal Orientation CLE AN...
  • Page 75 Figure 6-4 Figure 6-5 illustrate how to install and remove a SPA in a Cisco ASR14K-20XGE-FL SIP when the SIP is installed in the Cisco ASR 14000 Series Router. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide...
  • Page 76 Chapter 6 Installing and Removing a SPA SPA Installation and Removal Figure 6-4 Installing and Removing a SPA—Vertical Orientation Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 77: Installing A Spa In A Sip

    Insert the SPA so that the blank side of the SPA is facing up, when being inserted into a SIP that Note is not installed in the Cisco ASR 14000 Series Router. The blank side of the SPA should be facing to the right when the SPA is inserted into a SIP that is installed in the Cisco ASR 14000 Series Router.

  • Page 78: Removing A Spa From A Sip

    Step 3 Online Insertion and Removal Cisco ASR 14000 Series Router SIPs and SPAs support online insertion and removal (OIR). SPAs can be inserted or removed independently from the SIP. Online insertion and removal of a SIP with installed SPAs is also supported.

  • Page 79: Cleaning Optical Devices

    When a SIP or SPA has not been previously installed in the same slot or subslot, then the configuration for all associated interfaces is empty. Note New interfaces are not available until you configure them. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 80: Using Show Commands To Verify Sip And Spa Status

    FPD version information of SPAs in the system. show version Cisco IOS XR software version, names and sources of configuration files, and boot images. Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 81: Spa Blank Filler Plates

    To remove the cable-management bracket, press the button on the bracket and pull it out. Step 3 Blank filler plugs are provided if no cable-management brackets are installed. Note Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...
  • Page 82 CO NNE WIP ES CTO R TING CLE AN WIT H NEC TOR WIP ES TING Cable-management bracket being removed Cable-management bracket being installed Blank filler plug Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide 6-10 OL-17456-01...

  • Page 83: Chapter 7 Troubleshooting The Installation

    Determine whether there are any active alarms by looking at the alarm LEDs on the alarm module (8-slot) or the route processor (4-slot). See Cisco ASR 14000 Series Router 8-Slot Line Card Chassis System Description or Cisco ASR 14000 Series Router 4-Slot Line Card Chassis System Description for more information about alarms.

  • Page 84: Troubleshooting The Spa

    Returns the SPA to the up state. The node-id argument is no hw-module subslot node-id shutdown entered in the rack/slot/module notation. Example: RP/0/RP0/CPU0:router(config)# no hw-module subslot 0/1/0 shutdown Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 85: Using Debug Commands

    Using debug Commands The debug spa command is intended for use by Cisco Systems technical support personnel. Debugging output is assigned high priority in the CPU process and, therefore, can affect system performance. For more information about the impact on system performance when using debug commands, refer to Using Debug Commands on Cisco IOS XR Software.

  • Page 86: Packing A Sip For Shipment

    Packing a SIP for Shipment Packing a SPA for Shipment This section provides step-by-step instructions for packing a SPA and the cable-management brackets for shipment. Before beginning this procedure, you should have the following original Cisco Systems packaging materials: Thermoform container (transparent plastic-molded clamshell) •...
  • Page 87 Troubleshooting the Installation Packing a SPA for Shipment The Cisco Systems original packaging is to be used for the shipment of all SPAs and cable-management Caution brackets. Failure to properly use Cisco Systems packaging can result in damage or loss of product.
  • Page 88 Chapter 7 Troubleshooting the Installation Packing a SPA for Shipment Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide OL-17456-01...

  • Page 89: I N D E X

    SFP module 3-26 see ESD 4-1, 4-2 bandwidth capacity failed, SPA limits for SIP fatal error on SIP oversubscription blank filler plate, SPA 1-2, 6-9 Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide IN-1 OL-17456-01...
  • Page 90 3-16 descriptions (table) 3-16 optical transceiver modules 3-17 overview 3-15 captive screws OC-3c/STM-1 POS SPA ejector lever bandwidth 3-3, 3-14 pair with SIP 2-2, 5-3 cables Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide IN-2 OL-17456-01...
  • Page 91 OC-12c/STM-4 Multirate POS SPA 3-7, 3-9 RFC 1662, PPP in HDLC-like Framing 3-8, 3-17, 3-20 for OC-3c/STM-1 POS SPA 3-3, 3-5 for OC-48c/STM-16 POS/RPR SPA 3-14 Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide IN-3 OL-17456-01...
  • Page 92 3-19 1-Port OC-192c/STM-64 POS/RPR XFP 3-15 2-Port and 4-Port Clear Channel T3/E3 3-35 2-Port and 4-Port OC-48c/STM-16 POS 3-12 XFP-10GER-OC192IR 1-4, 3-17, 3-33 4-Port OC-3c/STM-1 POS Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide IN-4 OL-17456-01...
  • Page 93 1-4, 3-17, 3-33 XFP-10GZR-OC192LR2 XFP module 3-34 cabling 3-35 for OC-192c/STM-64 POS/RPR XFP SPA 3-15, 3-17 intermediate reach 3-17, 3-33 short reach 3-33 very-long reach 3-33 Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide IN-5 OL-17456-01...
  • Page 94 Index Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide IN-6 OL-17456-01...

Table of Contents