2-Port and 4-Port OC-48c/STM-16 POS SPA Overview
Table 3-7
Specification
RX overload
Maximum receiver power damage
2-Port and 4-Port OC-48c/STM-16 POS SPA Overview
The following sections describe the 2-Port and 4-Port OC-48c/STM-16 POS SPA:
•
•
•
2-Port and 4-Port OC-48c/STM-16 POS SPA LEDs
The 2-Port and 4-Port OC-48c/STM-16 POS SPA has five types of LEDs: four LEDs for each port on
the SPA and one STATUS LED, as shown in
Figure 3-7
1
2
3
Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide
3-12
OC-12 Specifications (continued)
2-Port and 4-Port OC-48c/STM-16 POS SPA LEDs, page 3-12
2-Port and 4-Port OC-48c/STM-16 POS SPA Interface Specifications, page 3-13
2-Port and 4-Port OC-48c/STM-16 POS SPA Cables, Optical Transceiver Modules, and Connectors,
page 3-13
2-Port OC-48c/STM-16 POS SPA Faceplate
1 2
3 4
PTH (Pass Through) LED
PRT (Protect) LED
CAR (Carrier Alarm) LED
Chapter 3
Overview: Cisco ASR 14000 Series Router Shared Port Adapters
Description
OC-12 MM: –6 dBm
OC-12 SR: –8 dBm
OC-12 IR-1: –8 dBm
OC-12 LR-1: –8 dBm
OC-12 LR-2: –8 dBm
OC-12 MM: +5 dBm
OC-12 SR: +5 dBm
OC-12 IR-1: +5 dBm
OC-12 LR-1: +5 dBm
OC-12 LR-2: +5 dBm
Figure
3-7.
4
ACT (Active Loopback) LED
5
STATUS LED
SPA-2XOC48-POS/RPR
5
OL-17456-01